Gill Athletics

The Gill AGX M4 High Jump Pit is the premium tier of Gill's high jump landing systems, built for flagship programs that compete at the highest level. Measuring an expansive 27'-2" x 13'-2" x 28", the M4 exceeds NFHS and NCAA minimums to deliver elite-level coverage, while AGX Countervail construction reduces vibration for consistent, cushioned landings across the entire pit surface.

Key features & specs

• Overall size: 27'-2" x 13'-2" x 28" — oversized for maximum coverage
• AGX Countervail construction reduces vibration for consistent landings
• Durable vinyl cover with a top-pad (TP) surface
• Exceeds NFHS and NCAA high jump safety minimums
• Built for high-caliber competition and flagship track venues

Coach's tip: protect this premium investment with the matching Gill weather cover any time the pit is idle. Clean the vinyl with mild soap and water, keep the landing surface dry to preserve the foam, and store the pit covered or indoors through the off-season to protect the AGX Countervail core for years of elite performance.

The Gill Weather Cover for the 64817 High Jump Pit is engineered to fit the 64817 pit model precisely, protecting the landing foam from rain, sun, and debris during storage and off-season periods. A weather cover significantly extends the lifespan of a high jump pit by preventing the UV degradation and moisture absorption that steadily break foam down — making it one of the smartest small investments a program can make.

Key features & specs

• Precisely sized for the Gill 64817 high jump pit
• Shields foam from UV rays, moisture, and windblown debris
• Holds its shape and protective properties through years of use
• Model-specific design means no awkward fitting or improvised tie-downs
• Weather-resistant material built for demanding outdoor conditions

Maintenance tip: keep the pit covered any time it isn't in use to get the full benefit, not just over winter. Sweep off debris and let everything dry before storing, and give the seams and fasteners a quick check each season so the cover stays secure when the wind picks up.

The Gill G1 High Jump Pit strikes an ideal balance between landing area and footprint, measuring 18' x 10' x 26" — big enough to satisfy high school safety requirements while remaining size-efficient for facilities that can't accommodate a flagship pit. A durable vinyl cover over a top-pad (TP) surface rounds out a landing system that's a popular choice among programs nationwide for its blend of quality and value.

Key features & specs

• Overall size: 18' x 10' x 26"
• Durable vinyl cover with a top-pad (TP) landing surface
• Size-efficient footprint for space-conscious facilities
• Vinyl exterior holds up outdoors and cleans up easily after wet meets
• Satisfies NFHS high jump safety requirements

Coach's tip: add the matching Gill weather cover to shield the foam from UV and rain between meets and extend the pit's usable life. Spot-clean the vinyl with mild soap and water, keep the surface dry to prevent foam breakdown, and store the pit covered or indoors during the off-season whenever possible.

The Gill G4 High Jump Pit gives programs a spacious, confidence-inspiring landing zone at 20' x 13'-2" x 28". Finished with a durable vinyl cover over a top-pad (TP) surface, the G4's larger footprint gives jumpers and coaches added margin during both competition and training — an ideal upgrade for programs building out a full-featured high jump facility.

Key features & specs

• Overall size: 20' x 13'-2" x 28"
• Durable vinyl cover with a top-pad (TP) landing surface
• Expanded footprint for an added margin of safety
• Weather-resistant, easy-to-clean vinyl exterior
• Engineered to meet NFHS and NCAA high jump safety specifications

Coach's tip: protect your investment with the matching Gill weather cover whenever the pit is idle to shield the foam from sun and rain. Wipe the vinyl down with mild soap and water, keep the landing surface dry to guard against foam breakdown, and store the pit covered or indoors through the off-season to maximize its lifespan season after season.

The Gill Weather Cover for the 64417 High Jump Pit is designed to match the 64417 pit model precisely, shielding the foam landing units from the UV exposure, rain, and debris that accelerate breakdown in outdoor track facilities. Covering a pit whenever it's idle is one of the simplest, most cost-effective maintenance habits a program can adopt to protect a significant equipment investment.

Key features & specs

• Model-specific fit for the Gill 64417 high jump pit
• Guards against UV damage, rain saturation, and airborne debris
• Secure, gap-free coverage that won't sag or pool water
• Built from durable material that endures repeated outdoor seasons
• Purpose-made to match the 64417's exact dimensions

Maintenance tip: don't wait for the off-season — cover the pit between practices and meets to slow everyday UV aging. Brush off debris and drain any standing water before removing it, dry both pieces before storage, and inspect the tie-downs annually so the cover holds in high wind.

The Gill S4 High Jump Pit delivers a competition-ready landing system in a footprint compact enough for facilities with limited runway space. Measuring 16'-6" x 10' x 26" and finished with a durable vinyl cover over a top-pad (TP) surface, the S4 gives high school and collegiate programs a generous, safe landing zone without demanding the space of a full flagship pit.

Key features & specs

• Overall size: 16'-6" x 10' x 26"
• Durable vinyl cover with a top-pad (TP) landing surface
• Compact footprint suited to space-limited facilities
• Vinyl exterior is easy to clean and resists the outdoor elements
• Engineered to meet NFHS high jump safety standards

Coach's tip: add the matching Gill weather cover to protect the foam between meets and extend the pit's service life. Spot-clean the vinyl with mild soap and water, keep the surface dry to prevent foam breakdown, and store the pit covered or indoors during the off-season whenever possible.

The Gill Weather Cover for the 64217 High Jump Pit is custom-fitted to the 64217 pit model, giving programs an easy, reliable way to protect their landing system between competitions and through the off-season. Sun, rain, and debris are the enemies of foam, and leaving a pit uncovered can cut years off its life — a snug, model-specific cover keeps the pit in competition shape far longer.

Key features & specs

• Custom-fitted for the Gill 64217 high jump pit
• Protects foam from UV rays, moisture, and windblown debris
• Snug fit prevents water pooling and stays put in wind
• Weather-resistant material engineered for years of outdoor use
• Eliminates the gaps and slippage of universal-fit tarps

Maintenance tip: make covering the pit part of your after-practice routine so it's protected every day, not just seasonally. Clear off leaves and standing water regularly, allow the cover and pit to dry before storing, and check the seams and fasteners at the start of each season.

The Gill Weather Cover for the 64117 High Jump Pit is engineered to fit the 64117 pit model exactly, protecting the foam landing system from the three things that damage it most: UV radiation, rain, and windblown debris. For equipment that represents a major line-item in any track budget, a fitted cover is a low-cost insurance policy that pays for itself in years of extended pit life.

Key features & specs

• Model-matched to the Gill 64117 high jump pit for a precise, gap-free fit
• Blocks UV degradation and moisture absorption that break down foam
• Secure fit resists blow-off in wind and water pooling in rain
• Durable weather-resistant material built for multiple outdoor seasons
• Purpose-built alternative to improvised tarps and universal covers

Maintenance tip: cover the pit any time it isn't in use rather than only over winter — everyday sun exposure is what quietly ages the foam. Sweep off debris before removing the cover, let both pit and cover dry fully before storage, and inspect the tie-downs each season so it stays anchored on windy days.

The Gill Weather Cover for the 640A High Jump Pit is a purpose-built cover for the Gill Essentials High Jump Pit, protecting one of your program's biggest equipment investments from the elements. A high jump pit's foam is highly vulnerable to UV rays, rain, and windblown debris, all of which shorten its usable life — a fitted weather cover is the single most cost-effective way to keep it performing season after season.

Key features & specs

• Sized specifically for the Gill Essentials High Jump Pit (16' x 8' x 24")
• Shields foam landing units from UV exposure, rain, and debris
• Model-matched fit stays secure and resists pooling or sagging
• Weather-resistant material built for repeated outdoor seasons
• Available in Royal Blue only to match the Essentials pit

Maintenance tip: put the cover on whenever the pit isn't in active use, not just over the off-season, to maximize foam life. Let the pit and cover dry before storing them together, brush off standing debris regularly, and check the seams and tie-downs periodically so the cover stays secure in wind.

The Gill Essentials High Jump Pit is an economical landing system that delivers full high-school compliance without the premium price tag, making it a go-to choice for programs building or replacing a high jump area on a budget. In place of a traditional top pad, the Essentials system uses a skirted mesh top that draws the units together for a snug, stable fit — keeping the landing surface tight and unified through every jump.

Key features & specs

• Overall size: 16' x 8' x 24" (4.88m x 2.44m x 0.61m)
• Two base units, each 8' x 8' x 24"
• Skirted mesh top holds units together for a snug fit (no separate top pad)
• Meets all high school rules requirements
• Available in Royal Blue only
• Backed by a five-year warranty

Coach's tip: pair the pit with the matching Gill weather cover to shield the foam between meets and dramatically extend its service life. Store the pit indoors or covered when possible, spot-clean the vinyl and mesh with mild soap and water, and keep the units dry to prevent foam breakdown over the seasons.

The Gill Sloped Pole Vault Standard Base Pads are a mandatory safety component for any compliant pole vault installation, wrapping the exposed base uprights of the standard system in protective padding. The sloped profile is the key: it lets athletes land on and around the standards without striking sharp corners or hard edges, reducing injury risk in the busiest, highest-traffic zone of the vault area.

Key features & specs

• Designed specifically for the Gill 61617C pole vault standard system
• Sloped profile eliminates sharp corners and hard edges at the base
• Protects both athletes and the standard structure during landings
• Precision-fit for seamless integration with compatible standards
• Helps meet safety requirements at high school and collegiate facilities

Facility tip: inspect the pads at the start of every season and replace any with compressed foam or torn covers, since worn padding no longer provides compliant protection. Wipe the covers down with mild soap and water, let them dry fully before storage, and keep them out of prolonged direct sun when the runway is idle to extend cover life.

The Gill Heavy Duty Soccer Goal Anchor Bag is a simple, essential piece of safety equipment that keeps portable soccer goals firmly planted on any playing surface. Unanchored goals are a serious tip-over hazard, and these bags provide the counter-balance needed to hold a goal in place on grass, turf, or hard courts where in-ground stakes aren't an option. You supply the fill — up to 50 lbs of sand per bag — making them affordable to ship and easy to store when not in use.

Key features & specs

• Anchors portable soccer goals on virtually any surface
• Holds up to 50 lbs of user-supplied sand per bag
• Rests on the rear base frame of the goal for maximum counter-balance
• Best positioned in the back corners of the goal
• Heavy-duty construction built for repeated seasonal use

Safety tip: always anchor both rear corners before allowing play, and never let athletes climb or hang on a goal even when anchored. Empty the bags for off-season storage, keep them dry to prevent mildew, and inspect the seams and handles for wear before each season.

The Gill Aluminum Futsal Goals bring gym-ready, regulation-style play to schools, rec centers, and training facilities that need durable goals they can move and set in seconds. Built from powder-coated aluminum, they're light enough to reposition by hand yet rigid enough to stand up to daily use, and the included easy-engage wheels let a single person roll them into position and lock them down without a crew or a cart.

Key features & specs

• Powder-coated aluminum construction — lightweight, rust-resistant, and built for indoor use
• Easy-to-engage wheels for fast, one-person setup and takedown
• Goal opening measures 6'7" x 9'10"
• Includes a 4mm white net and mounting wheels
• Ideal for futsal, PE class, and small-sided training

Coach's tip: engage the wheels only when moving the goals and retract them during play so the frame sits solidly on the floor. Wipe the aluminum down periodically, confirm the net is securely fastened before sessions, and store indoors to protect the powder-coat finish and netting.

The Gill Steel Vault Box is the foundation of a safe, competition-grade pole vault runway. Constructed from heavy-duty steel, it delivers the strength and rigidity programs demand at the high school and collegiate level, receiving the pole tip at plant and safely transferring the enormous forces generated during the vault. Because the box is one of the most punished pieces of pole vault infrastructure, Gill's steel build is engineered to withstand repeated impact season after season without deforming or shifting.

Key features & specs

• Heavy-duty steel construction for maximum strength and rigidity
• Engineered to receive the pole tip at plant and transfer force safely
• Withstands repeated competitive impact without deforming
• Meets NFHS and NCAA specifications
• A trusted choice for new installations and runway renovations

Facility tip: pair the vault box with a compliant box collar to pad the exposed hard surfaces around the plant area. Keep the box clear of sand and debris, drain standing water after rain, and periodically inspect the welds and mounting to ensure it stays flush with the runway surface.

The Gill 3 Piece Pole Vault Crossbar is the smart-shipping solution for programs that want competition-grade performance without competition-grade freight bills. It's the only Gill competition crossbar engineered to ship in a small package by UPS rather than by truck, dramatically reducing shipping charges and letting you expedite delivery when a meet is on the line. The bar arrives in three sections and assembles quickly in the field, then performs like a one-piece bar once it's set on the standards.

Key features & specs

• Ships in three pieces via UPS small package for lower freight cost and faster, expeditable delivery
• Built from the same durable, thick-walled pultruded fiberglass used in Gill's Collegiate Crossbars
• Assembles on-site for immediate meet-day use
• Meets NFHS and NCAA specifications for high school and collegiate competition
• Consistent flex and roll-off performance expected from a Gill competition bar

Coach's tip: keep a spare on hand so a chipped bar never delays a meet. Store the crossbar horizontally on a rack or in its shipping tube to prevent warping, wipe it down after wet meets, and inspect the sections and end fittings for cracks before each use.

The Gill AGX Pole Vault Crossbar is Gill's premier competition bar, engineered to give vaulters every technical advantage the rules allow. Its exclusive half-moon profile ends lower the bar's center of gravity so it sits more stably on the pegs — keeping the bar up on near-miss clearances that would dislodge a lighter, less stable crossbar and giving athletes the benefit of the doubt at big heights.

Key features & specs:

• Profile ends: Exclusive half-moon ends lower the center of gravity for peg stability
• Weight: Built to the heaviest weight the rules allow for maximum stability
• End pieces: Shorter, more stable, redesigned for improved performance
• Construction: Durable thick-walled pultruded fiberglass rod
• Compliance/Note: Meets High School and NCAA specifications; not guaranteed against breakage; GP-530

Coach's tip: Set the bar with the half-moon ends seated correctly on the pegs for maximum stability, and inspect it for cracks or deep scratches before each session — crossbars aren't guaranteed against breakage, so retire any compromised bar. Store it supported along its full length to prevent a permanent bow.

The Gill AGX is the premier high jump crossbar in Gill's competition lineup — purpose-built for athletes and facilities that demand every technical advantage the rules allow. The AGX's patented half-moon end profile and maximum-allowable weight work together to keep the bar on the pegs through near-miss clearances that would dislodge a lighter, less stable crossbar, giving jumpers the benefit of the doubt on borderline attempts.

• Exclusive Half-Moon Profile Ends – Patented half-moon shaped end pieces lower the crossbar's center of gravity compared to standard round-end bars, keeping the bar sitting more stably on the standard pegs and reducing the chance of the bar falling on near-miss clearances — a critical competitive advantage for athletes pushing personal records and championship heights
• Heaviest Crossbar the Rules Allow – The AGX is engineered to the maximum weight permitted under competition rules, providing the greatest possible bar stability and peg-sitting inertia — heavier bars are less easily dislodged by incidental contact, giving jumpers more margin on close clearances at high heights
• Thick-Walled Pultruded Fiberglass Rod – Premium thick-walled fiberglass construction through the pultruding process delivers consistent flex characteristics, minimum sag across the full 13'1-1/2" span, and the structural integrity needed to withstand the physical demands of high-volume competition and practice use
• Redesigned Shorter, More Stable End Pieces – Updated end piece geometry is shorter and more precisely contoured than previous designs, providing improved contact stability on standard pegs and a more consistent bar-to-peg interaction across different standard brands and configurations at competition venues
• World Athletics, NFHS, and NCAA Certified – Carries full World Athletics (IAAF) certification and meets NFHS and NCAA specifications, making it competition-legal at high school, collegiate, and international competition levels without requiring different bars for different meet standards
• Standard 13'1-1/2" Competition Length – Full regulation length for high jump competition, compatible with all standard high jump uprights; also suitable for pole vault crossbar use — ships via freight carrier due to length; ordering multiple bars helps offset shipping costs

The Gill Elastic Krossband is a training crossbar that takes the fear out of learning to clear height in the pole vault and high jump. Instead of a rigid bar, it uses a bright fluorescent orange elastic cord with foam sections — so athletes get a clear visual target and honest feedback on clearance without the intimidation or risk of a hard fiberglass bar.

Key features & specs:

• Type: Elastic training crossbar for pole vault and high jump
• Cord: Bright fluorescent orange for high visibility
• Sections: 1" diameter foam sections along the cord
• Benefit: Builds confidence and technique without a rigid bar
• Model: GP-528

Coach's tip: Use the Krossband for beginners and height-progression drills so athletes commit fully without fearing a hard bar, then transition to a competition crossbar. Store it loosely coiled to preserve the elastic's stretch, and keep it out of prolonged sun to protect the foam and cord.

Gill Track Armor protects your track surface from the wear of foot traffic, equipment, and crossover zones with a low-profile, roll-out mat that's tough enough to stay put yet easy to move when needed. Sold by the foot in 6' widths up to 100' long, its 100% recycled, antimicrobial top cloth is durable, virtually stainproof, and simple to maintain — ideal for high-traffic areas of any track facility.

Key features & specs:

• Size: 6' wide x up to 100' long; priced per foot
• Top cloth: 100% recycled, antimicrobial-infused polyester; durable and virtually stainproof
• Profile: Low-profile 1/4" thickness with square sides for minimal-seam placement side by side
• Backing: Weatherproof extruded vinyl — pliable, easy to roll and store
• Weight/Safety: 82 oz/sq yd (0.6 lb/sq ft); bright red safety edging glued and sewn on; GP-493670

Coach's tip: Lay sections square with the low-profile edges butted together for a near-seamless walkway across crossover zones. Roll it up and store it dry between events to protect the track underneath and keep the recycled top cloth clean.

The Gill Orbiter Handle is the replacement grip for Gill Orbiter Lead Throwing Weights, restoring a secure, comfortable hold when the original handle wears down. Its wide, textured design gives throwers dependable grip through the turns and release — an economical fix that keeps a valuable training weight in service instead of replacing the whole implement.

Key features & specs:

• Type: Replacement handle (handle only)
• Design: Wide, textured grip for a secure hold
• Finish: Textured black
• Compatibility: Fits Gill Orbiter Lead Throwing Weights
• Model: GP-491030

Coach's tip: Inspect handles regularly and swap in a fresh one at the first sign of wear or cracking — a compromised grip is a safety risk with a heavy throwing weight. Keep a spare on hand so a worn handle never sidelines a training weight mid-session.

The Gill Take-Off Board with Base Board is built for the Gill 441TS installation system, pairing a durable composite take-off board with a base board that anchors it flush within the runway tray. The result is a stable, competition-legal surface for long jump and triple jump — and composite construction that shrugs off the warping and weathering that plague traditional wood boards.

Key features & specs:

• Compatibility: Designed for the Gill 441TS installation system
• Includes: Composite take-off board plus a base board substrate
• Construction: Composite material that resists warping and weather damage
• Benefit: Anchors flush in the runway tray for a legal, safe take-off surface
• Model: GP-441S

Coach's tip: Seat the base board fully in the 441TS tray and check that the take-off surface sits flush with the runway before competition. Keep the composite surface clean of grit for consistent traction, and verify leveling each preseason so jumps stay fair and accurate.

The Gill Replacement Soccer Net Clips keep your net securely fastened to an aluminum goal with a safe, simple slide-in design. Sold as a set of 50 white clips, they fit any Porter aluminum goal — sliding into the goal's continuous slot for a clean, snag-free attachment that's fast to install and easy to replace when a clip wears out.

Key features & specs:

• Quantity: Set of 50 clips
• Color: White
• Compatibility: Fit any Porter aluminum goal
• Design: Safe, simple clips that slide into a continuous slot
• Model: GP-484050

Coach's tip: Space the clips evenly along the goal's slot so the net hangs taut and shots read cleanly, and keep a handful of spares on hand since clips are the first thing to wear. Check them at the start of each season and replace any that have cracked to keep the net secure.

The Gill Javelin/Hammer Adjustable Back Brace gives throwers firm lumbar support during the explosive, rotational demands of the javelin and hammer. Eight supportive steel springs conform to the back to stabilize the lower spine, while adjustable elastic straps let each athlete dial in the exact tension they need — a smart support piece for hard-training throwers.

Key features & specs:

• Support: Eight steel springs conform to the back for firm lumbar support
• Main band: 9" high elastic band for broad support
• Adjustability: Second 4" outer elastic straps allow adjustable tension
• Fit: Tapered cut for men and women; one size fits waists 28"–50" (71–127 cm)
• Model: GP-4581

Coach's tip: Fit the brace snugly over the hips with the springs centered on the lower back, then set the outer straps for firm-but-mobile support before throwing. A brace supports good mechanics but doesn't replace them — pair it with a proper warm-up and core work, and see a trainer or medical professional for any ongoing back pain.

The Gill Sand Pit Broom is designed to move sand exactly where you need it around long jump and triple jump pits. Its combination of soft outer bristles and coarse inner bristles sweeps stray sand quickly back into the pit and off the surrounding runway and apron — keeping the competition area clean, safe, and looking sharp for every meet.

Key features & specs:

• Bristles: Soft outer bristles with coarse inner bristles to move sand quickly
• Handle: Guaranteed not to loosen
• Use: Sweeping stray sand back into long jump/triple jump pits
• Benefit: Keeps the runway and apron clean and safe
• Model: GP-453

Coach's tip: Sweep sand off the runway and apron between flights so athletes have clean, non-slip footing on their approach. Keep the broom with your pit shovel and rake as a complete maintenance kit, and store it indoors so the bristles hold their shape season after season.

The Gill Pit Rake keeps long jump and triple jump landing pits smooth, level, and competition-ready. Constructed from strong, durable aluminum with a wide 36" head, it lets the runway crew groom a large area of sand in just a few passes — essential for consistent, safe landings and accurate measurement between every jump.

Key features & specs:

• Head width: 36" wide for fast, efficient pit grooming
• Construction: Strong, durable aluminum
• Use: Leveling and smoothing long jump/triple jump sand pits
• Benefit: Covers a large area quickly for consistent, safe landing surfaces
• Model: GP-451

Coach's tip: Rake the pit level and flush with the runway before every flight so jumps land and measure fairly, and pull loose sand back from the edges to keep the pit full. Rinse the aluminum head after wet meets and store it with your shovel and broom as a complete pit-maintenance kit.

The Gill Pit Shovel is a rugged, purpose-built tool for maintaining long jump and triple jump landing pits. Its tempered steel blade cuts easily through packed sand to level, turn, and redistribute the pit between jumps and after practice, while the reinforced fiberglass handle stands up to daily use without the splintering or bending of cheaper tools.

Key features & specs:

• Blade: Tempered steel for durability and easy digging in packed sand
• Handle: Reinforced fiberglass for strength and long life
• Use: Leveling and maintaining long jump/triple jump sand pits
• Best for: Track and field programs maintaining jump runways
• Model: GP-450

Coach's tip: Keep a shovel, rake, and broom together as a pit-maintenance kit so the runway crew can reset the pit quickly between flights. Rinse sand off the blade after use and store the tool indoors so the steel stays clean and the handle lasts for years.

This composite take-off board and base board combination is designed specifically for the Gill 444 System, giving facilities a reliable, low-maintenance upgrade over traditional wood boards. The Polyboard composite surface resists the warping, splitting, and cracking that shortens the life of wooden boards, making it a practical long-term investment for high school and college programs.

• • Polyboard Composite Surface – Environmentally friendly, waterproof composite material that will not warp, split, or crack under repeated impact and outdoor conditions, offering significantly longer lifespan than wood
  • Reversible Board Design – Take-off board can be flipped to extend usable life, reducing replacement frequency and overall maintenance costs for track facilities
  • Adjustable Aluminum Base Board – Allows precise horizontal and vertical leveling to achieve a flush, competition-legal fit within the installation tray without requiring full board removal during adjustments
  • NFHS and NCAA Certified – Meets governing body specifications for high school and collegiate long jump and triple jump competition, making it suitable for sanctioned meets at both levels
  • Superior Grip Surface – Textured composite top provides consistent, reliable traction at the take-off point, supporting confident jumps and reducing the risk of slipping during competition

This board is the standalone composite replacement for facilities that already have the Gill 444 System installed and need to swap out a worn or damaged take-off board without replacing the full system. The Polyboard composite surface maintains consistent grip and structural integrity through heavy seasonal use, eliminating the warping and cracking issues common with wood boards.

• • 444 System Compatible – Designed specifically as a direct replacement for Gill 444 Take-Off Board System installations, fitting precisely without modification or additional hardware
  • 8" Wide Polyboard Composite Surface – Waterproof, environmentally friendly composite material resists splitting, cracking, and warping across all weather conditions and heavy use cycles
  • Superior Grip for Jumpers – Textured composite surface provides reliable traction at the take-off point, supporting confident, consistent launches in both training and competition
  • Longer Lifespan Than Wood – Composite construction holds up far longer than traditional plywood boards, reducing how often facilities need to order replacements and cutting long-term maintenance costs
  • College Competition Ready – Meets NCAA specifications for sanctioned long jump and triple jump events at the collegiate level