Long & Triple Jump Equipment

The Gill Conversion Take-Off Board (441C) lets facilities adapt an existing 19.5" take-off board system down to a standard 8" board — a cost-effective way to update your runway to current competition setups without replacing the entire installation. It drops into the 442 tray and includes everything needed to make the switch cleanly.

Key features & specs:

• Function: Converts a 19.5" take-off board system to an 8" system
• Fit: Replacement assembly that fits in the Gill 442 tray
• Includes: 8" composite take-off board, black Vultrak, and base board
• Compliance: Meets NFHS and NCAA rules
• Model: GP-441C

Coach's tip: Confirm you have the 442 tray installed before ordering so the conversion board seats correctly. Set it flush with the runway and check the leveling before competition, and keep the composite surface clean of grit so athletes get consistent traction at the plant.

The Gill Composite Take-Off Board for the 4350 System is the replacement jumping surface for Gill's Adjustable Take-Off Board System, restoring a fresh, high-traction surface for long jump and triple jump competition. Made from Gill's environmentally friendly Polyboard composite, it delivers a durable, waterproof board that won't split or crack while giving jumpers a confident, grippy plant point at the foul line.

Key features & specs:

• Replacement take-off board sized for the Gill 4350 Adjustable Take-Off Board System
• Constructed of Polyboard composite — an eco-friendly, waterproof material that resists warping, splitting, and cracking
• High-traction surface gives jumpers a secure, consistent plant on take-off
• Reversible design flips over to extend the usable life of the board
• 8" board pairs with a 4" foul board in the 12" system to meet NCAA and high school (NFHS) specifications
• Drops into your existing 4350 installation tray and adjustable aluminum leveling base

Coach's tip: Flip the reversible board to the fresh side once the take-off surface shows heavy spike wear to get a full second season out of it. Care: Rinse off grit and standing water after wet meets and store indoors during the off-season to protect the composite surface.

The Gill Ready-Fit Aluminum LJ/TJ Sand Pit Cover is the ideal cosmetic cover for long jump and triple jump sand pits, fabricated from extruded aluminum seat plank for a clean, seamless look that protects the pit between sessions. Because it's pre-fitted to a matching Gill Functional-Form Sand Pit, it drops into place precisely and lets a track builder apply the same running surface used on the track for a fully integrated facility appearance.

Key features & specs:

• Constructed from durable extruded aluminum seat plank for a rigid, weather-tough cover
• Three planks per panel securely welded together in a 2-3/8" x 1-1/2" x 3/16" aluminum angle frame
• Four retractable handles per panel for fast, easy installation and removal
• Designed to accept the same track surface for a seamless, professional finished look
• Same construction as the Gill 730148 Aluminum Cover, pre-fitted to a new Gill Functional-Form Sand Pit (e.g., F44023C pairs with the F44023 pit)
• Must be purchased at the same time as a Gill Functional-Form Sand Pit

Coach's tip: For an existing pit at your facility, order the Gill Item 730148 aluminum cover instead of this pre-fitted Ready-Fit version. Care: Keep the retractable handles free of sand and grit, and rinse the planks periodically so the surface stays clean and level.

The Gill Mesh LJ/TJ Sand Pit Cover keeps your long jump and triple jump pit clean, safe, and ready for competition by keeping out leaves, debris, and animals between sessions. This gray mesh version is built for facilities where drainage matters more than full rain protection — the vinyl-coated woven polyester mesh lets water pass through instead of trapping it, while still shielding the sand from the mess that fouls an uncovered pit. It's a durable, no-nonsense cover that protects your investment and cuts down on pit maintenance.

Key features & specs:

• Sized 11'9" x 25'6" to cover a standard LJ/TJ sand pit
• Constructed of vinyl-coated woven polyester mesh for drainage and durability
• Fill included pouches with sand to anchor the cover securely against wind
• Choose solid vinyl instead if full rain protection is the priority
• Optional 5' x 5' multi-color graphic on a white background available (vector artwork and order form required)

Coach's tip: Fill the anchor pouches with sand and seat them evenly around the perimeter so the cover stays put in gusty conditions. Rake the pit before covering, and hose the mesh clean periodically to keep it draining freely and looking sharp.

The Gill 19.5" Composite Take-Off Board System gives long jump and triple jump programs a wider, competition-legal take-off zone built to outlast traditional wood. The 19.5" configuration provides added take-off surface for training and multi-standard use, while Gill's Polyboard composite delivers dependable grip meet after meet without the splitting, warping, or rot that plague wooden boards. It arrives as a complete, ready-to-install system so your runway is meet-ready with a single order.

Key features & specs

• Complete system includes the installation tray, aluminum base board, and reversible take-off board
• 19.5" composite take-off surface for added take-off area
• Polyboard composite construction — environmentally friendly, waterproof, and will not split or crack
• Offers jumpers excellent, consistent grip
• Reversible board flips to a fresh face to extend usable life
• Meets NFHS specifications

Coach's tip: Flip the reversible board to its fresh side once the take-off zone shows wear — it doubles service life before a replacement is needed. Care: Rinse grit and standing water off after wet meets; the waterproof composite requires no sealing or painting like wood boards do.

The Gill Surface Roller is the fastest way to get your facility back in action after rain. Designed to clear standing water from tracks, runways, and throwing circles, this wide roller pushes puddles off the surface quickly and easily so practices and meets can start on time instead of waiting for the sun. Its versatility makes it a valuable multi-sport tool — it works just as well squeegeeing outdoor tennis and pickleball courts as it does prepping a track after a storm.

Key features & specs

• Clears water from tracks, runways, and throwing circles quickly and efficiently
• Generous 36" working width covers more ground with each pass
• Also ideal for drying outdoor courts, including tennis and pickleball
• Simple, durable design built for repeated facility use
• A must-have for weather-dependent outdoor programs

Coach's tip: Keep the roller near your track access gate so crews can clear lanes the moment rain stops — you'll reclaim valuable practice and warm-up time. Care: Rinse off grit after use, dry before storing, and store indoors or under cover to protect the roller surface between uses.

The Gill Composite Take-Off Board for the 441TS System gives long jump and triple jump programs a competition-legal take-off surface engineered to outlast traditional wood. Made from Gill's Polyboard composite, it delivers dependable grip for jumpers meet after meet while shrugging off the moisture and repeated impact that split and warp wooden boards. Whether you're replacing a worn board or completing a full 441TS installation, it drops in cleanly and keeps your runway meet-ready.

Key features & specs

• Composite Polyboard construction — environmentally friendly, waterproof, and won't split or crack
• Delivers reliable grip and a true surface for consistent take-offs
• Reversible design flips to a fresh surface to extend usable life
• 441TS complete system option includes installation tray, aluminum base board, and reversible take-off board
• Model 44105 available as the take-off board only for straightforward replacement
• Meets NFHS specifications

Coach's tip: When one side shows wear, flip the board to the fresh face before buying a replacement — it effectively doubles service life. Care: Rinse off grit and standing water after wet meets; the waterproof composite needs no sealing or painting like wood boards do.

Shield your sand pit from rain and debris with the Blazer Jump Pit Waterproof Vinyl Pit Cover. Built from heavy 18-oz solid polyester vinyl, this waterproof cover keeps rain out and the sand dry and ready to jump — with attached weight pouches to hold it firmly in place against wind.

Key features & specs:

• 18-oz waterproof solid polyester vinyl construction
• Keeps rain and debris out to protect sand condition
• Comes with unfilled, attached weight pouches for secure anchoring
• Heavy-duty build for lasting outdoor use
• Available in six colors (Red, Royal, Kelly, Black, Light Gold/Yellow, Gray)

A durable, weatherproof cover for long jump and triple jump programs that want to keep their pit dry and playable. Choose your color and size when ordering, fill the weight pouches with sand to anchor the cover, and spread it over the pit whenever it's idle or rain threatens. Let it dry before folding and store it dry so the vinyl stays supple and waterproof for years.

Keep sand, leaves, and debris out of your jump pit with the Blazer Jump Pit Vinyl-Coated Mesh Pit Cover. Made from durable 10-oz vinyl-coated polyester mesh, it lets air and light rain pass through while keeping the pit clean between sessions — with attached weight pouches to hold the cover securely in place.

Key features & specs:

• 10-oz vinyl-coated polyester mesh construction
• Mesh design lets air pass through to reduce wind lift
• Comes with unfilled, attached weight pouches for anchoring
• NOT waterproof — a mesh debris cover, not a rain barrier
• Available in six colors (Red, Royal, Kelly, Black, Light Gold/Yellow, Gray)

A practical cover for long jump and triple jump programs keeping their sand pits clean. Choose your color and size when ordering, fill the weight pouches with sand to anchor the cover, and spread it over the pit whenever it's not in use. For rain protection, choose the waterproof vinyl version instead. Let the cover dry before folding and store it dry to maximize its life.

Keep your jump pit covers anchored and secure with the Blazer Replacement Sandbag with Velcro. Designed for use with Blazer #1604 pit covers, this Velcro-closure sandbag attaches to the cover's weight pouches to hold it firmly in place — so wind doesn't lift your sand pit cover and expose the pit between sessions.

Key features & specs:

• Velcro closure for easy filling and secure attachment
• Designed for use with Blazer #1604 jump pit covers
• Holds approximately 5 lbs of sand when filled (arrives unfilled)
• Compact 7" x 14" size
• A direct replacement for lost or worn cover weights

A practical, low-cost replacement for long jump and triple jump programs maintaining their pit covers. Fill the bag with sand and seal the Velcro closure, then attach it to your pit cover's weight pouches to anchor the cover against wind. Empty and store the bags dry in the off-season, and keep a few spares on hand so a lost weight never leaves your pit cover unsecured.

Help your jumpers and vaulters hit their steps every time with the Blazer Runway Marker Set. These solid-steel discs mark approach checkpoints on synthetic runway surfaces, giving athletes clear, consistent visual references for their run-up in the long jump, triple jump, high jump, and pole vault.

Key features & specs:

• Designed for marking approaches on synthetic surfaces
• Solid steel construction for durability and stability
• Five bright colors so athletes can distinguish their marks
• Low-profile discs that won't interfere with the approach
• Priced per set of 5

A simple, affordable coaching aid for track programs dialing in approach consistency. Set the markers at each athlete's checkpoints during practice so they groove a repeatable run-up, and assign colors to different jumpers to avoid confusion. Collect them after each session, wipe them clean, and store the set together so they're always ready for the next practice or meet.

Build a permanent, drainable long jump take-off with the Blazer Stainless Steel Long Jump Tray with 8" Wood Board. The 16-gauge stainless tray installs into your runway with leveling bolts and drain holes, and the included 8" regulation board drops right in — a professional, low-maintenance setup that keeps your take-off area level, dry, and competition-ready.

Key features & specs:

• Designed to work with the included #1248 8" take-off board
• 16-gauge stainless steel tray with a 1" square-tubing frame
• Six leveling bolts to align the board flush with the runway
• Drain holes for easy water drainage; boards lift out when not in use
• Dimensions 51" x 10" (53 lbs)

An excellent runway upgrade for high school and collegiate long jump programs. Install the tray flush with the runway using the leveling bolts, drop in the board for competition, and remove it when the runway is idle to extend its life. Clear the drain holes of grit and store the board dry so both the tray and board stay in top shape for years.

Outfit your runway with a classic, rules-compliant take-off surface: the Blazer Wood Long Jump Take-Off Board. Manufactured from laminated wood and finished in durable white enamel, this 8" board meets rule-book specifications for both high school and collegiate use — the standard-width board jumpers know and trust.

Key features & specs:

• 8"-wide regulation take-off board
• Manufactured from laminated wood for strength and consistency
• Sealed, primed, and finished with white enamel paint
• Meets rule-book specifications for high school and collegiate use
• Dimensions 2-1/2" x 8" x 48"

A dependable, competition-grade choice for long jump programs replacing a worn board or building a runway. Install the board flush with the runway surface per competition specs, and remove or cover it when the runway isn't in use to protect the finish. Let it dry after wet meets and store it in a dry space so the laminated wood doesn't swell or warp over time.

Give your long jump runway a professional, weather-smart setup with the Blazer Stainless Steel Long Jump Tray with 20" Wood Board. The stainless tray installs into your runway with drain holes to shed water, and the included 20" take-off board drops right in — a durable, low-maintenance system that keeps your take-off area clean and competition-ready.

Key features & specs:

• 20" stainless steel tray with drain holes for water runoff
• Includes the #1242 20" take-off board
• Boards lift out when not in use to protect them and the runway
• Corrosion-resistant stainless steel construction
• Dimensions 51" x 21" x 5" (54 lbs)

An excellent runway upgrade for high school long jump programs that want a permanent, drainable take-off system. Install the tray flush with the runway, drop in the board for competition, and remove the board when the runway is idle to extend its life. Clear the drain holes of grit and store the board dry so both the tray and board stay in top shape for years.

Keep your long jump runway competition-ready with the Blazer 20" Long Jump Take-Off Board. Manufactured from marine-grade plywood and finished with durable white enamel, this wide take-off board meets high school rules and gives jumpers a clean, consistent, highly visible surface to hit their mark.

Key features & specs:

• 20"-wide take-off board for a generous, visible take-off surface
• Manufactured from marine-grade plywood to meet high school rules
• Sealed, primed, and finished with white enamel paint for weather resistance
• Dimensions 2-3/4" x 20" x 48"
• A direct replacement or upgrade for your long jump runway

A durable, rules-compliant choice for high school long jump programs replacing a worn board or building out a runway. Install the board flush with the runway surface per competition specs, and remove or cover it when the runway isn't in use to protect the finish. Let it dry after wet meets and store it in a dry space to prevent the plywood from swelling or warping over time.

The 4" World Athletics Foul Board is the dedicated replacement component for facilities running Gill's 4351S World Athletics-certified take-off board setup. Positioned alongside the 8" take-off board to complete the full 12" system, the foul board plays a critical role in foul detection under World Athletics technical rules — making its condition directly relevant to competition integrity.

• World Athletics Specific Configuration – Sized and designed to meet World Athletics (IAAF) technical requirements for long jump and triple jump foul detection, making it the correct replacement for facilities certified under international competition standards
• 4" Width Foul Board – Pairs with the 8" composite take-off board to complete the regulation 12" combined system width required for World Athletics sanctioned events, restoring the full competition-legal setup when the original board reaches end of life
• Polyboard Composite Construction – Built from the same environmentally friendly, waterproof Polyboard composite material used across Gill's take-off board lineup — resistant to warping, splitting, and cracking under outdoor conditions and repeated athletic contact
• Direct System Compatibility – Fits the Gill Adjustable 12" Take-Off Board System (4351S) installation without modification, dropping into the existing tray and base hardware for a straightforward swap
• Extends Full System Life – Replacing the foul board alone rather than the entire system significantly reduces maintenance costs for facilities that host World Athletics-level competition on a regular seasonal basis

The Gill LJ/TJ Take-Off Marker Set gives long jump and triple jump athletes a clear visual reference for hitting the take-off board on their approach. Bright, collapsible markers stand along the runway to guide steps and build a consistent, confident approach in both practice and warm-ups. Made from safe, collapsible plastic, they yield on contact rather than tripping an athlete, and they stack flat for easy transport and storage.

Key features & specs:

• Guides athletes to the horizontal-jumps take-off board
• Safe, collapsible plastic that yields on contact
• High-visibility markers for a consistent approach
• Stackable for easy transport and storage
• Sold as a set of 2

Coach's tip: Place the markers at each athlete's check marks so they can dial in a repeatable approach every rep. Keep a set in the event bag for meets and warm-ups, and wipe them down before stacking them away to keep the bright colors clean and visible.

The Gill Sand Pit Leveler levels a long jump or triple jump pit quickly and precisely, replacing back-breaking hand raking with a single smooth pass. The 10-foot steel bar spans the pit and glides across on adjustable guides, leaving a flat, competition-ready surface in seconds so officials can reset between jumps and keep the event moving. It is a facility upgrade that saves labor and improves consistency at every meet.

Key features & specs:

• 10' long steel leveler flattens the pit in one pass
• Two 40" long wired handles for two-person operation
• Adjustable guides glide the leveler smoothly across the pit
• Powder-coated in architectural gray for corrosion resistance
• Eliminates slow, uneven hand raking

Coach's tip: Set the guide height so the bar just skims the pit rim for a flat, even surface, and pull it in one steady pass. Rinse off clinging sand and store the leveler dry to protect the powder coat and keep it sliding smoothly.

The Gill Sand Pit Perimeter Pad adds protective cushioning around the edges of the long jump and triple jump sand pit, reducing injury risk when athletes land near the perimeter or step onto the border during competition and practice. It is a straightforward, high-value upgrade that brings an existing sand pit up to current safety expectations without a full renovation, protecting jumpers at every skill level from the hard edges that frame the landing area.

Key features & specs:

• Cushions the hard perimeter edges of long jump and triple jump pits
• Designed to meet NFHS safety recommendations
• Durable construction built for repeated outdoor use and weather exposure
• Complements Gill's full line of jumping-event equipment
• Simple addition to improve safety on an existing pit

Coach's tip: Fit the padding snugly around the full perimeter and check the anchoring before each season. Brush off sand and let the pads dry before storage to protect the vinyl cover and keep the foam performing year after year.

The Gill Take-Off Board with Base Board is built for the Gill 441TS installation system, pairing a durable composite take-off board with a base board that anchors it flush within the runway tray. The result is a stable, competition-legal surface for long jump and triple jump — and composite construction that shrugs off the warping and weathering that plague traditional wood boards.

Key features & specs:

• Compatibility: Designed for the Gill 441TS installation system
• Includes: Composite take-off board plus a base board substrate
• Construction: Composite material that resists warping and weather damage
• Benefit: Anchors flush in the runway tray for a legal, safe take-off surface
• Model: GP-441S

Coach's tip: Seat the base board fully in the 441TS tray and check that the take-off surface sits flush with the runway before competition. Keep the composite surface clean of grit for consistent traction, and verify leveling each preseason so jumps stay fair and accurate.

The Gill Sand Pit Broom is designed to move sand exactly where you need it around long jump and triple jump pits. Its combination of soft outer bristles and coarse inner bristles sweeps stray sand quickly back into the pit and off the surrounding runway and apron — keeping the competition area clean, safe, and looking sharp for every meet.

Key features & specs:

• Bristles: Soft outer bristles with coarse inner bristles to move sand quickly
• Handle: Guaranteed not to loosen
• Use: Sweeping stray sand back into long jump/triple jump pits
• Benefit: Keeps the runway and apron clean and safe
• Model: GP-453

Coach's tip: Sweep sand off the runway and apron between flights so athletes have clean, non-slip footing on their approach. Keep the broom with your pit shovel and rake as a complete maintenance kit, and store it indoors so the bristles hold their shape season after season.