High Jump Equipment

The Blazer Collegiate Flight High Jump Pit is a large-format competition landing system built for college and elite high school programs that demand maximum coverage and federation-legal safety. Its bigger footprint and Blazer's proven foam-and-cover construction give jumpers a consistent, cushioned landing at the highest levels of competition, season after season.

Key features & specs:

• 18-oz. vinyl-coated, breathable nylon cover; XL-1000 Supreme Prime foam filling
• Lattice-type internal foam construction with built-in handles for easy lifting and carrying
• Durable lock rings hold all units securely together; seams first under-sewn then top-stitched
• Meets all high school and college federation standards; top pad and weather cover included
• 3 base units 6'W x 10'L x 26"H; top foam pad 18'W x 10'L x 2"H; overall 18'W x 10'L x 28"H
• 12-year warranty; base colors: Red, Gold, Orange, Royal, Navy, Forest, Maroon, Purple, Gray, Black; top colors: Red, Royal, Forest, Gray, Black

Coach's tip: position the pit on level ground with full coverage of the takeoff area and lock all units together before use. Store covered and dry in the off-season to protect the foam and cover.

The Blazer Varsity Flight High Jump Pit is a competition-ready landing system built for high school track and field programs that need dependable, federation-legal safety meet after meet. With extended front protection and Blazer's proven foam-and-cover construction, it delivers consistent, cushioned landings and stands up to full seasons of outdoor use.

Key features & specs:

• Extended front protection for added safety on the approach side
• 18-oz. vinyl-coated, breathable nylon cover; XL-1000 Supreme Prime foam filling
• Lattice-type internal foam construction with built-in handles for easy lifting and carrying
• Durable lock rings hold all units securely together; seams first under-sewn then top-stitched
• Meets all high school and college federation standards; top pad and weather cover included
• 2 base units 5'10"W x 8'L x 26"H + 1 unit 5'10"W x 9'L x 26"H; top foam pad 17'6"W x 9'L x 2"H; overall 17'6"W x 9'L x 28"H (with safety cutout for standards)
• 12-year warranty; base colors: Red, Gold, Orange, Royal, Navy, Forest, Maroon, Purple, Gray, Black; top colors: Red, Royal, Forest, Gray, Black

Coach's tip: set the pit on level ground with the extended front fully covering the takeoff area, and lock all units together before every session. Store covered and dry in the off-season to protect the foam and cover.

The Blazer Elementary High Jump Pit is a right-sized, entry-level landing system built for elementary and youth track programs teaching the fundamentals of the high jump. This one-piece unit is easy to move, set up, and store, giving younger athletes a soft, confidence-building place to land as they learn proper takeoff and clearance technique. It's designed specifically for elementary-level use rather than competition, keeping the footprint and cost manageable for schools and youth programs.

Key features & specs:

• Overall size: 12'W x 6'L x 24"H
• One-piece unit with no separate top pad — simple, all-in-one construction
• Recommended for elementary-level practice and instruction
• Manageable footprint that's easy to position, move, and store
• Choice of base colors: Red, Lt. Gold, Orange, Royal, Navy, Forest, Maroon, Purple, Gray and Black

Coach's tip: pair the pit with standards and a crossbar sized for your athletes, and always position it on level ground with the landing area fully covered. Store the pit indoors and keep the cover clean and dry to extend its life.

• Aesthetic and functional design eliminates spike contact with base units and unevenness at the edge of the pit. This Gill exclusive feature will increase the life of your new pit and improve safety near the edges.

• Using exclusive 17 x 11 1000 denier material increases the life of your top pad and stands up to repeated use better than any on the market.

• Soft and durable foam creates confidence in every practice. Coaches can teach with assurance because of this industry leading design.

• Designed to evenly distribute the force from the athlete's landing, V-Loop straps eliminate tears compared to traditionally designed pits that put undue stress on the seams.

• Extend the life of your pit; Gill's top pads are designed to use either side safely and easily.

• Top Pad is connected to base pads with carbiner side attachments, eliminating any obstruction on top of the pit. This detail provides an obstruction-free landing area with athletes' safety in mind.

• Exclusive to Gill landing systems, this unique design keeps water out of your pit better than old-school mesh top units. Protecting the foam from water extends the life of your landing system.

• New design provides reversible sections for maximum interchangeability. This adds years to the life of your pit by maximizing the usage and size of the athlete's landing area.

• Athletes need to know they are landing safely and comfortably. Gill's new quadruple Duralife foam is 25% softer than others yet with firmness necessary for the safest landings.

• Evenly distributed 1000 x 1000 denier polyester fabric is bonded on both sides with 18oz knife-coated PVC Vinyl. The exclusive fabric design eliminates vinyl delamination seen in other pits after years of use. This creates the most durable casing on the market that is lighter than the other pits.

• Gill's entire landing system is stitched with the industry's strongest 210 bonded polyester thread. Simply put, your new Gill pit comes triple stitched with the toughest thread in the industry to hold up to high volume practices.

• A pit is safest when constructed as an integrated system. Gill's Grip Strip Fastening System will keep your base sections functioning as one unit season after season.

• Gill Athletics cares about the environment and your budget. All landing systems are expertly packed and shipped utilizing Compress-Pack shipping, reducing freight volume, lowering fuel consumption and shipping costs. Pits restore to original size and shape quickly after unpacking.

• A long-term warranty is only as dependable as the company standing behind it. After 100 years, you can count on Gill to stand behind your landing system for years to come. If any failure occurs in the first 12 years, under normal use and care, we will repair or replace the damaged part.

• Choose from over 100 unique vinyl casing and top pad color combinations. Select your vinyl casing (xx) and top pad (yy) color combination. Add distinction with multi-color graphics on the top pad, weather cover, or both.

Raise the bar on your high jump program with the Gill G4 High Jump Standards. Built from heavy-duty aluminum with custom glide parts, they deliver smooth, precise height changes and rock-solid stability from warm-ups through the final attempt — a competition-grade standard trusted at the highest levels of the sport.

Key features & specs:

• Heavy-duty aluminum uprights and risers with custom glide parts for smooth operation
• Weighted steel base with wheels for easy mobility and leveling feet for a true setup
• Clamping mechanism pulls upright and riser together to lock in the desired height
• Height adjustment from 2'8" to 8'4" with an adjustable height-readout window
• Reads both English and Metric measurements
• Meets NFHS, NCAA, and World Athletics specifications; World Athletics Certified
• Backed by a 10-year warranty

Coach's tip: Level the base carefully on uneven surfaces before competition so the crossbar sits true across both standards. Wipe down the uprights and store indoors to keep the glides moving freely and protect the finish.

The Gill AGX M2 Pole Vault Standards are a premium, competition-grade standard built to make height changes fast, measurement precise, and athletes safer. A hand-crank system speeds up transitions between heights, while a dual positional locking system lets you switch between quick practice adjustments and locked-in competition peg heights. Paired with a customizable 2" safety pad, an internal measuring tape, and a stable steel base with Easy-Port hinge mobility, it's a standard that performs at the highest levels of high school and collegiate vaulting.

Key features & specs

• Hand-crank height system — Simplifies and speeds up transitions between bar heights
• Dual positional locking — Practice Mode for quick height changes; Competition Mode locks peg height during jumps
• Customizable 2" safety pad — Choose color and graphics; increases athlete safety and reduces vaulting-pole damage
• Internal measuring tape — Displays both metric and English units for precise height setting
• Stable, mobile base — Steel base for stability with Easy-Port hinge technology for quicker repositioning
• Height range — 6' 9" to 21' 6"
• Certified — Meets NFHS and NCAA specifications, World Athletics Certified; backed by a 10-year warranty

Coach's tip: Use Practice Mode for warm-up progressions, then switch to Competition Mode to lock peg height and keep meet settings consistent. Care: Keep the crank mechanism clean and lightly lubricated, and store the safety pad indoors to protect the cover and graphics.

The Gill Polymer Platform gives your Gill 654 Pole Vault landing system a dry, elevated foundation that fights the biggest enemy of any pit: standing water. By lifting the foam and vinyl base off the ground surface, it stops rain and ground moisture from soaking in from below — the leading cause of foam breakdown and casing rot in pole vault pits. Molded from tough polymer, it resists rust and corrosion entirely, delivering a long-lasting base with virtually no upkeep.

Key features & specs

• Elevates the pit — Raises the 654 Pole Vault landing system above the ground to prevent water damage and extend service life
• Durable polymer construction — Rust- and corrosion-proof, with no metal components to degrade over time
• Modular pallet design — Individual sections are easy to carry, position, and store
• Built for the 654 System — Sized to support the Gill 654 Pole Vault landing system

Coach's tip: Set the platform on a level, well-draining surface and confirm the pit sits flush across the full base before every season. Care: Rinse off dirt and debris periodically and stack the sections for compact storage in the off-season.

The Gill Polymer Platform is the modern, low-maintenance way to keep a Gill 641 High Jump landing system off the ground and out of standing water. Elevating the pit protects its foam core and vinyl casing from the moisture that pools on tracks and infields — the number-one cause of premature landing-system breakdown. Built from durable polymer instead of metal, this platform won't rust or corrode, making it an easy, long-term foundation for programs that leave their pits set up through the season.

Key features & specs

• Elevates the pit — Raises the 641 High Jump landing system above the ground to prevent water damage and extend pit life
• Durable polymer construction — Rust-proof and corrosion-proof, with no metal to degrade in wet conditions
• Modular pallet design — Made up of individual sections that are easy to carry, position, and store
• Built for the 641 System — Sized to support the Gill 641 High Jump landing system

Coach's tip: Place the platform on a level, well-draining surface so water sheds away from the pit rather than collecting around the base. Care: Rinse off debris as needed and stack the sections for compact off-season storage.

Standing water is the fastest way to ruin an expensive landing pit, and the Gill Aluminum Platform is the fix. Built to support the Gill 641 High Jump System above the ground surface, it lifts the foam and vinyl base off the track so rain and ground moisture can't pool underneath and break down the pit from below. For programs protecting a serious investment in their landing system, this platform is the difference between a pit that lasts a few seasons and one that lasts for years.

Key features & specs

• Elevates the pit — Supports high jump (and pole vault) landing pits above the ground to prevent water damage and premature foam breakdown
• Corrosion-resistant aluminum — Stands up to rain, humidity, and outdoor exposure without rusting
• Modular pallet design — Consists of individual pallets that are easy to carry, position, and store
• Built for the 641 System — Sized to support the Gill 641 High Jump landing system

Coach's tip: Set the platform on a level, well-draining surface so water sheds away from the pit entirely. Care: Rinse off dirt and debris periodically and stack the pallets for compact off-season storage.

The Gill Pole Vault Standard Offset Extensions let officials and coaches drop the crossbar well below the standards' normal minimum, opening up your vault runway to younger and developing athletes who compete at lower heights. This 2-pin version lowers the crossbar an additional two feet, extending the usable range of your existing standards without buying a second set. Finished in safety orange for high visibility around the pit, they're a simple, durable add-on that makes your vault program accessible to more of your athletes.

Key features & specs:

• 2-Pin Offset Extensions lower the crossbar an additional 2' below standard minimum
• 4-Pin Offset Extensions (sold separately) lower the crossbar an additional 4'
• Powder-coated in high-visibility safety orange
• Sold as a pair to fit both standards

Coach's tip: Keep a set with your vault standards so you can quickly accommodate beginning vaulters or youth meets without swapping equipment. Store them with the pins so nothing goes missing, and wipe down the powder-coated finish after wet meets to keep the safety-orange visibility bright.

The Gill Sloped Manual AGX PV Standard Base Pads are purpose-built for Gill's AGX M2 manual pole vault standards, giving your program a precise-fit safety component instead of a generic one-size compromise. The sloped profile is contoured to the AGX M2 base so the pads seat correctly and cushion the standard bases, protecting vaulters from hard contact and shielding poles from impact during vaults and dismounts. For any facility running AGX M2 standards, these are the matched base pads that complete a safe, competition-ready pole vault setup.

Key features & specs

• Designed specifically for Gill AGX M2 (manual) Pole Vault Standards
• Sloped profile contoured to the AGX M2 base for a precise fit
• Protects vaulters from impact with the standard bases
• Also shields poles from base contact during use
• Sold in pairs (one per standard)

Coach's tip: Confirm you're running AGX M2 manual standards before ordering — pads are shaped per standard model and won't seat correctly on a different base. Care: Wipe clean, dry fully before storage, and inspect for compression or tears each season so the pads keep cushioning as intended.

The Gill Sloped AGX M4 PV Standard Base Pads are engineered specifically for Gill's AGX M4 pole vault standards, delivering a precise, purpose-built fit that generic pads can't match. Their sloped profile is contoured to the AGX M4 base geometry, cushioning the standard bases so vaulters and poles are protected from hard contact during vaults and dismounts. For programs running AGX M4 standards, these are the correct, competition-ready base pads to complete a safe pole vault setup.

Key features & specs

• Designed specifically for Gill AGX M4 Pole Vault Standards
• Sloped profile contoured to the AGX M4 base for a precise fit
• Protects vaulters from impact with the standard bases
• Also shields poles from base contact during use
• Sold in pairs (one per standard)

Coach's tip: Match your base pads to your exact standard model — AGX M4 pads are shaped for that base and won't seat correctly on other standards. Care: Wipe clean, dry fully before storing, and check for wear or compression each season so the pads continue to cushion as designed.

The Gill Flat PV Standard Base Pads deliver critical protection at the base of your pole vault standards — one of the most overlooked collision points in the event. Positioned around the standard bases, they shield vaulters from hard contact and protect expensive poles from impact damage during vaults and dismounts. For any program running pole vault, base pads are a fundamental safety investment that keeps athletes confident and equipment intact.

Key features & specs

• Fits 28" tall Gill systems and all standards with center-mounted uprights
• Protects vaulters from impact with the bases of the pole vault standards
• Also shields poles from hitting the standard bases
• Flat profile designed for center-mounted upright configurations
• Sold in pairs (one per standard)

Coach's tip: Confirm your standards use center-mounted uprights before ordering — the flat profile is designed specifically for that configuration. Care: Wipe the vinyl surface clean, allow to dry before storage, and inspect the pads for compression or tears at the start of each season to ensure they still cushion effectively.

Protect your landing systems and the athletes who use them with the Gill Pit Stop base plate system. Pole vault and high jump pits shift under repeated landings and can slide dangerously toward standards or hard surfaces; the Pit Stop locks the base in place with a spiked, powder-coated steel plate — a simple, rugged safety addition that keeps your pit where it belongs, practice after practice.

Key features & specs

• 1/4" powder-coated steel plates for heavy-duty, corrosion-resistant durability under constant use
• 1/2" spikes on the base secure the plate to the surface and prevent the pit from shifting
• Pole Vault Pit Stop includes two base plates joined by a connector panel
• High Jump Pit Stop includes a single base plate
• Universally compatible with any pole vault or high jump pit
• Low-profile design anchors the pit without obstructing the landing area

Coach's tip: set the Pit Stop on firm, level ground and press the spikes fully in so the plate can't creep during a session, then reposition the pit over it and check alignment before athletes begin. Inspect the plates and spikes periodically for bends, and wipe them down and store dry in the off-season to preserve the powder coat.

Keep your vault runway stocked with the Blazer Deluxe Fiberglass Pole Vault Crossbar — Set of 3. Blazer's finest crossbar, in a value three-pack, gives your vault program the backups it needs across meets and practice — built with the same double-matte pultruded construction preferred and used by many world-class competitors.

Key features & specs:

• Set of 3 Deluxe Fiberglass pole vault crossbars — a money-saving bundle
• Double-matte pultruded fiberglass for consistent flex and durability
• Meets Collegiate, International, and High School Federation specs
• Preferred and used by many world-class competitors
• Length 14'10" each (pole vault length)

A cost-effective buy for pole vault programs that want spare bars ready for meets and daily practice. Set each bar evenly on the standard pins and handle them carefully to avoid nicks and cracks that affect performance. Store the crossbars flat and fully supported along their length in a dry space to prevent bowing, so they stay true and competition-ready season after season.

Stock your high jump venue and save with the Blazer Deluxe Fiberglass High Jump Crossbar — Set of 3. Blazer's finest crossbar, in a value three-pack, gives your program the backups it needs for meets and practice — with the same double-matte pultruded construction preferred and used by many world-class competitors.

Key features & specs:

• Set of 3 Deluxe Fiberglass high jump crossbars — a money-saving bundle
• Double-matte pultruded fiberglass for consistent flex and durability
• Meets Collegiate, International, and High School Federation specs
• Preferred and used by many world-class competitors
• Length 13'1-1/2" each

A smart, cost-effective buy for high jump programs that want spares on hand for meets and daily practice. Set each bar evenly on the standard pegs and handle them carefully to avoid nicks and cracks. Store the crossbars flat and fully supported along their length in a dry space to prevent bowing, so they stay true and competition-ready season after season.

Set the bar with the best: the Blazer Deluxe Fiberglass High Jump Crossbar is the company's finest crossbar, preferred and used by many world-class competitors. Its double-matte pultruded construction delivers the consistent flex, balance, and durability serious high jumpers demand — meeting Collegiate, International, and High School Federation specifications.

Key features & specs:

• Double-matte pultruded fiberglass construction for consistent performance
• Meets Collegiate, International, and High School Federation specs
• Preferred and used by many world-class competitors
• Length 13'1-1/2"
• Available individually — or save with the Set of 3

A premium, competition-grade crossbar for high jump programs at every level. Set it evenly on the standard pegs before each attempt, and handle it carefully to avoid nicks and cracks that affect performance. Store the crossbar flat and fully supported along its length in a dry space to prevent bowing, so it stays true and competition-ready season after season.

Launch a high jump program in one purchase with the Blazer Elementary High Jump Package. This complete value bundle pairs an appropriately sized elementary landing system with everything a young program needs to start jumping right away — standards, a crossbar, and a weather cover to protect the whole setup between sessions.

Key features & specs:

• #1251 Elementary Pit (12' x 6' x 24")
• #1251WC Weather Cover to protect the pit from the elements
• #1215 Steel High Jump Standards (one pair)
• #1511 Deluxe Fiberglass Crossbar
• Choose base, top, and weather-cover colors to match your program

An ideal, cost-effective package for elementary and youth programs building a high jump venue from scratch. Assemble the system on level ground per Blazer's instructions, keep the weather cover on the pit whenever it's not in use to protect the foam from moisture and UV, and inspect the pad and cover each season so your landing system stays safe and ready for years of young jumpers.

Protect your landing system investment from the ground up with the Blazer Aluminum Pit Platform. Built from non-corrosive aluminum, this modular platform elevates your high jump or pole vault pit off the ground — improving airflow and drainage to guard the foam base units from moisture and water damage over years of outdoor use.

Key features & specs:

• Non-corrosive aluminum construction for long outdoor life
• Modular design for quick, straightforward assembly
• Elevates the pit to protect foam from ground moisture and water damage
• Sized to your pit — price is listed per square foot
• Call with your pit dimensions for an accurate total price

A smart, protective foundation for any program installing a high jump or pole vault landing system. Provide your exact pit dimensions when ordering so the modular platform is sized correctly, assemble it on level ground beneath the pit, and keep the platform clear of debris so water drains freely. A worthwhile investment that meaningfully extends the life of an expensive landing system.

Outfit your program affordably with the Blazer Steel High Jump Standard. Built entirely from durable steel with a powder-coated upright, it's a rugged, budget-friendly standard that covers the full range of high school competition — a dependable workhorse for daily practice and meets alike.

Key features & specs:

• All-steel construction for lasting durability
• Powder-coated upright resists wear and keeps a clean appearance
• Adjusts from 12" to 7'6", marked on the upright in 1/2" increments
• Stable, dependable base for competition and practice
• Sold in pairs (compatible with the optional #1202 wheel kit for easy transport)

A cost-effective, durable standard for high school high jump programs. Set the crossbar height to match each athlete and level the standards on the runway before competition, adding the optional wheel kit if you move them often. Wipe them down after wet meets to protect the powder-coat finish and prevent rust, and store them indoors so they stay competition-ready for years.

Bring championship-grade performance to your high jump with the Blazer Collegiate Aluminum High Jump Standard. Anodized aluminum uprights with a telescoping riser and a stable steel roll-away base with leveling screws deliver the precision and portability collegiate competition demands — NCAA and IAAF certified for sanctioned meets.

Key features & specs:

• 2.5"D x 5.5"W anodized aluminum uprights with a telescoping riser
• Adjusts from 1.5' to 9'; heights marked in English and metric
• Steel roll-away base with adjustable leveling screws for stability on any surface
• Powder-coated black finish for a lasting appearance
• NCAA and IAAF certified; sold in pairs (64 lbs)

A premium, fully compliant standard for collegiate and championship-level high jump programs. Roll the standards into position, level them with the base screws, and set the crossbar height per each athlete and competition rules. Wipe the aluminum and steel down after use and store them indoors so the standards stay accurate, stable, and competition-ready for years.

Move your high jump standards effortlessly with the Blazer Steel Roll-Away High Jump Standard. Built with a stable 16" base on wheels, it rolls smoothly into position and off the runway between events — a durable, easy-to-handle standard suited to both high school and college competition across the full height range.

Key features & specs:

• Adjusts from 2' to 8' in 1/4" intervals; metric scale 62–244 cm
• Powder-coated steel uprights for durability
• 16" base with built-in wheels for easy roll-away transport
• Suitable for high school and college competition
• Sold in pairs (38 lbs)

A practical, movable standard for programs that reposition their high jump setup regularly. Roll the standards into place and level them on the runway before competition, setting the crossbar to match each athlete. Wipe the wheels and uprights down after wet meets so they roll freely and resist rust, and store them indoors to keep them accurate and competition-ready for years.