Transport Cart 4’ x 8’, 17” off the ground. Easily moves up to  40-hurdles, pits, or other heavy equipment.  (4) 10” pneumatic wheels, (2) that swivel,  (2)that are fixed, provide easy pulling in grass  or hard surfaces. Painted steel construction  throughout with a wooden deck. Extends life to pits by reducing wear that occurs while dragging them. 1000 lb. capacity. Weight: 233 lbs   Super Carts, Wood Floor- Steel Frame Front axle has full 180 degree turning radius! Transports all pits, hurdles, standards, and more. Industrial-grade front axle swivel provides ease  in steering. Heavy-duty plywood load surface,  recessed in steel frame for protection.  16” fully pneumatic tires for easy pulling on  most surfaces. Can be pulled behind a small tractor. 1000 lb. capacity. 4’ x 8’ – 211 lbs. 2-BXS Weight: 211 lbs   Super Carts- Aluminum Floor & Frame Front axle has full 180 degree turning radius! Transports all pits, hurdles, standards and more. Industrial-grade front axle swivel provides ease in steering. Constructed of tread-plate, rust free aluminum surface and frame. 16? fully pneumatic  tires for easy pulling on most surfaces. Can be pulled behind a small tractor. 1000 lb. capacity. 4’ x 8’ – 178 lbs. 2-BXS Super Carts- Wood Floor & Steel Frame Front axle has full 180 degree turning radius! Transports all pits, hurdles, standards, and more. Industrial-grade front axle swivel provides ease in steering. Heavy-duty plywood load surface, recessed in steel frame for protection. 16” fully pneumatic tires for easy pulling on most surfaces. Can be pulled behind a small tractor. 1000 lb. capacity. 5’ x 10’ – 283 lbs. 2-BXS Weight: 283 lbs Super Carts- Aluminum Floor & Frame Front axle has full 180 degree turning radius! Transports all pits, hurdles, standards and more. Industrial-grade front axle swivel provides ease in steering. Constructed of tread-plate, rust free aluminum surface and frame. 16? fully pneumatic  tires for easy pulling on most surfaces. Can be pulled behind a small tractor. 1000 lb. capacity.

5’ x 10’ – 234 lbs. 2-BXS

Weight: 234 lbs

• Exclusive 8"x10" pedal allows full heel support for best starts
• This produces a more powerful and efficient acceleration pattern
• Precise and consistent foot placement is ensured using integrated pedal markings
• Angled spikes in base of pedals guarantee no slipping during explosive starts
• Built in handle allows for easy carriage between locations
• Pedals adjustable to 30, 40, 50, and 60 degrees
• Pedals will not fall off rail
• False Start Bracket included
• Meets NFHS, NCAA and World Athletics Specifications, World Athletics Certified.
• Assembly Video
• PAT. NO. 6,929,585 & 7,156,775

• Standard 4?x8? pedals with adjustable angles of 30, 40, 50, and 60 degrees
• Angled spikes to guarantee no slipping during explosive starts
• Pedals adjustable to 30, 40, 50, and 60 degrees
• Built in handle allows for easy carriage between locations
• Pedals will not fall off rail
• Meets NFHS, NCAA and World Athletics specifications, World Athletics certified
• Assembly Video
• PAT. NO. 6,929,585 & 7,156,775
• Related products

• Standard 4"x8" pedals with adjustable angles of 30, 40, 50, and 60 degrees
• Angled spikes to guarantee no slipping during explosive starts
• Pedals adjustable to 30, 40, 50, and 60 degrees
• Built in handle allows for easy carriage between locations
• Pedals will not fall off rail
• Meets NFHS, NCAA and World Athletics specifications, World Athletics certified
• Assembly Video
• PAT. NO. 6,929,585 & 7,156,775

Universal Starting Block Cart Capable of transporting 10-starting blocks. Steel construction. Top tray to place block shoes or other smaller equipment . 4-8? cushion heavy-duty tires for easy pushing from swivel end on grass or hard surfaces.

Weight : 85 lbs

Dimensions : 62 × 17 × 5 in

Basic All-Surface Starting Block Heavy gauge steel construction. Optional heavy-duty pins for  installation on dirt surfaces (sold separately). Insert the included spikes in the 14-tapped holes for optimum anchoring. 36” long, longer than most, for easy adaptation to the tall or short runner without being moved. Powder coated pedals and zinc plated rail assembly for long lasting, new appearance. Pedal adjusts by tilting and sliding along the runner. Pad color may vary. Weight : 12 lbs Dimensions : 38 × 9 × 6 in

The Newton International is the most trusted starting block at the collegiate and international level — popular with top athletes for its wide pedal surface, five-angle adjustability, and clean all-aluminum construction that delivers a precise, consistent start position every time. The built-in center rail handle and non-detachable pedal design make it as practical to manage between events as it is powerful off the line.

• 5" Wide Aluminum Pedals — 5 Angle Adjustments — Generously wide 5" x 6" cast aluminum pedals provide a large, stable push-off surface for explosive block starts, adjustable to five positions at 35°, 45°, 55°, 60°, and 65° — covering the full range of sprint start preferences from athletes at youth through international competition level
• Pedals Will Not Detach from Rail — Newton's patented pedal-to-rail connection keeps both pedals permanently on the center rail during transport and storage — eliminating the common frustration of pedals falling off between events during meet setup and reducing the risk of losing components at competition venues
• Lightweight All-Aluminum Construction — Entire block — rail, pedals, and hardware — is constructed from high-quality lightweight aluminum casting, providing the structural strength needed for explosive competition starts without the weight penalty of heavier steel-frame alternatives
• Built-In Center Carry Handle — Integrated handle on the aluminum center rail allows one-handed carry between events, making it fast and comfortable for athletes and officials to move the block on and off the track without disrupting event flow during multi-event competition schedules
• Threaded Spike Inserts for Easy Changeouts — Pedal bottoms feature threaded spike insert channels that accept different spike lengths for synthetic and dirt track surfaces — includes threaded spikes for synthetic surfaces and 6" spikes for dirt, making the block versatile across all track types
• IAAF, NCAA, and NFHS Certified — Meets all governing body specifications for sanctioned international, collegiate, and high school competition — the same block used at the world's top track and field meets and trusted by the best sprinters in the sport

Starting Block Cart Capable of holding 12-starting blocks. Steel construction. Large base tray to store shoes. 3” swivel rubber wheel casters. Weight : 58 lbs Dimensions : 50 × 32 × 4 in

Indoor Starting Blocks Brown plastic blocks. Adheres to any clean floor without glue or pins, (Recommended second person support blocks with feet from behind). Easily removable. Weight : 7 lbs Dimensions : 11 × 8 × 5 in

Collegiate Starting Block Milled, solid, anodized, aluminum construction. 90mm  long x 7mm thick slotted channel. Spikes in the front and back for greater stability on synthetic tracks. Pedals made with PVC pad and are adjustable at 5-angles.  7-1/2” x 5” shoes. Pad color may vary. Meets all NFHS rules and regulations and is IAAF certified. Weight : 7 lbs Dimensions : 35 × 15 × 3 in

University Starting Block 4? wide heavy stainless steel rail (rust proof) and  spike plates, with angled spikes that provide a solid grip on the track. The aluminum shoes are  7-3/4? x 6-1/2? with heavy-duty rubber pads and 4-different angle adjustments. Meets IAAF, NCAA and NFHS Rules. Weight:  15 lbs Dimensions: 14 × 10 × 8 in

Newton International Starting Block Top of the line. Collegiate and International starting system. Light-weight all aluminum casting. 5-pedal angle adjustments 35, 45, 55, 60 and 65 degrees. Easy carry center rail. Pedals will not come off rail during transport. Pedals have threaded spike inserts. Threaded spikes for synthetic surface and 2-6? spikes for dirt are included. Pad color may vary. Meets all NFHS rules and is IAAF certified. Weight: 16 lbs Dimensions: 28 × 16 × 5 in

The Gill XL All Terrain Wagon is the large-format solution for programs and facilities that outgrew the standard track wagon. The XL's expanded bed dimensions and higher load rating handle the full weight of heavy throwing implements, stacked hurdles, starting blocks, and field event accessories in a single trip — cutting the number of equipment runs between storage and the competition area before and after every practice and meet.

• XL Oversized Wagon Bed – Expanded length and width dimensions provide significantly more hauling capacity than the standard Gill Track Wagon, accommodating larger equipment loads, longer implements, and higher-volume equipment combinations in a single trip across the facility
• All-Terrain Pneumatic Tires – Large pneumatic tires absorb shock and roll smoothly over grass infields, gravel paths, rubber track surfaces, and uneven terrain between buildings and storage areas, eliminating the jarring and resistance that solid-wheel carts create on rough surfaces
• 500 lb+ Load Capacity – Built to haul the combined weight of the heaviest track and field equipment — shot puts, discuses, hammers, hurdle sets, pole vault standards, and starting blocks — without frame flex or wheel strain, giving programs confidence that a full equipment load moves safely every time
• Fold-Down Gate Design – All four gates fold flat for easy loading and unloading of long or awkward equipment from any side of the wagon, eliminating the need to lift items up and over a fixed wall and making the loading process faster for single-operator use before and after practice
• Durable All-Weather Construction – Wagon frame and bed are built to withstand constant outdoor exposure, heavy impact from throwing implements, and the wear of daily high-volume use across a full competitive season without structural deterioration or surface breakdown
• Multi-Use Equipment Versatility – Equally suited for transporting hurdles, starting blocks, shot puts, discuses, javelins, crossbars, field markers, and timing equipment — a single wagon that replaces multiple specialized carts for programs running multi-event track and field operations

• Conveniently haul a variety of track equipment
• Gates fold down for added convenience
• Large pneumatic tires for rugged terrain travel
• 500lb capacity to haul even the heaviest of equipment
• 48" long x 24" wide x 12" deep x 25" tall

• Holds up to 16 Starting Blocks; any style
• Large wheels make transportation easy
• Steel construction with durable black powder coat finish

Essentials Starting Block Cart holds up to 10 starting blocks. Steel construction with durable black powder coat finish

The Gill Aluminum Pit Cart is engineered for moving and storing high jump and pole vault landing pits, making the labor-intensive task of repositioning large foam pits safer and more efficient for athletic department staff. Constructed from lightweight aluminum, this cart is strong enough to support the weight of full landing systems while remaining maneuverable in tight facility spaces. The cart design protects the pit's foam and cover from ground abrasion during transport, extending the life of your landing equipment. Gill's pit handling accessories are designed to work seamlessly with their landing system line. Available at ST1 Sports for facilities managers and coaches looking to simplify and professionalize their pit storage and transport procedures.

Constructed of 3/4" MDO exterior plywood and 2" x 4" framing, the deck of this cart is 4' x 8'. Pneumatic caster wheels are 12" in diameter for easy maneuverability over smooth and rough surfaces. Deck height is 16".

• Holds up to 10 starting blocks horizontally
• Handle is included for easy transport
• Includes a storage shelf for loose pedals and accessories
• Steel construction with durable, architectural gray powder coat finish

Convert any style Fusion block from a conventional to a Moye pedal set up. Simply remove the easy-carry handle from the front of the rail and insert the Moye Pedal Adapter. The Moye start position is preferred by many coaches and sprinters because it allows for closer positioning of the front foot to the starting line. The Moye start position is also recommended for 3-point and standing starts (where competition allows). Patent 4,754,965. Only compatible with Gill Fusion Blocks.

Designed for indoor use. No nails, pins or holes needed to hold blocks into place. Foot pressure on the flaps provide a non-slip start.

Essentials Starting Block