High Jump Weather Covers

Extend the life of your landing system with the Blazer Cover Insert for Water Protection. Placed beneath your weather cover, this insert helps shed water off the top of the pit so moisture doesn't pool and soak into the foam — a simple, inexpensive way to protect your investment and keep your pit dry between sessions.

Key features & specs:

• Helps shed water off the weather cover to extend pit life
• Ends are capped with rubber tips to protect the top pad of the pit
• Simple to place and remove during weather-cover setup
• Durable build for repeated seasonal use
• Dimensions 34" x 34" x 4" (14 lbs)

A smart, low-cost accessory for programs protecting a high jump or pole vault landing system from weather damage. Position the insert under your weather cover so it channels water off the pit, and check that the rubber end caps stay in place to protect the top pad. Store it dry between uses so it's ready to protect your pit season after season.

Unleash Your Team's Spirit with Custom Graphics

Bring your team's identity to center stage with the Gill Custom Graphic Landing System Weather Cover Side Panel. No longer just a landing area, it becomes a showcase of school pride. Your custom logo or school name will stand out vibrantly on these extension panels, ensuring that every competition is filled with an unmistakable sense of belonging. Whether you're hosting a large meet or an invitational, these custom panels elevate the prestige of your pit, transforming it into a bold statement of who you are. Let your colors and branding envelop the competition space, inspiring athletes and supporters alike.

Versatile Customization for Every Setup

Seize the opportunity to tailor your pit's appearance with flexibility. The Gill Custom Graphic Landing System Weather Cover Side Panel provides options for both horizontal and vertical extensions, designed to precisely fit your specific layout. Only one panel is needed to make an impression, although both sides can be customized for an even more cohesive appearance. Dive into creativity by mixing and matching different panel styles to achieve the perfect visual harmony, thereby enhancing the overall look of your sporting event while keeping it unique and personal.

Quality Craftsmanship Meets Your Design

Trust in the quality and attention to detail that goes into crafting each Gill Custom Graphic Landing System Weather Cover Side Panel. When you submit your approved vector artwork, expert craftsmanship ensures that your design is faithfully reproduced with precision and vibrancy. To maintain the stunning graphic, it's recommended to keep the cover clean, store it dry, and protect it from lengthy UV exposure when not in use. This investment in your team's image is built to last, resisting weather and time while proudly displaying your team's colors and symbols season after season. Order now and take the first step toward creating an unforgettable sporting environment that leaves a lasting impression.

Showcase Your Brand's Strength

Introducing the Gill Custom Graphic; Size Panel; Landing System Bun Casing—the ultimate solution for expressing your school’s unique identity at every meet. Transform your venue into a canvas of vibrant creativity and let your school pride beam brightly. The perfect centerpiece for your athletic facility, this custom graphic bun casing not only captures eyes but also hearts, kindling a sense of belonging and excitement among athletes and audiences. Ideal for any institution that values its legacy, infuses its spirit into the competitive arena, and aspires to stand out unmistakably.

Rugged Resilience and Radiance

With Gill's innovative Dual Coated Vinyl, achieve the perfect balance between durability and aesthetic brilliance. This substrate guarantees enduring vibrancy and sharpness in all weather conditions, making it a steadfast companion against the sun’s relentless rays. Its exceptional resistance to UV, peeling, and fading ensures that your institution's colors and logos remain as vibrant as the spirit they represent—season after season. The relentless quality of this material means your graphics are not just a feature, but a protected investment in visibility and pride.

Flawless Fit and Function

The Gill Custom Graphic seamlessly fits into the fabric of your competitive setup, merging beautifully with your Gill's Ultimate Series landing systems. The exact fit, combined with a straightforward integration process facilitated by vector artwork submission, means your stunning graphics become reality in just 15 days. Elevate coordination by combining these bun casing graphics with Gill’s weather cover and top pad graphics. Let every inch of your field stand as a testament to your school’s excellence and unity, making sure your brand's message is confidently communicated at every high-profile event.

The Gill 60" x 60" Custom Graphic Weather Cover is built for programs that want to protect their landing system investment from weather damage while making a lasting impression at home meets and invitationals. The full-color custom graphic printing process delivers sharp, vibrant artwork on a white background — giving school logos and team colors the contrast and visibility they deserve on a championship-level pit setup.

• Full-Color Custom 5' x 5' Graphic Printing – The 60" x 60" (5'x5') square graphic area is screen-printed directly onto the weather cover on a white background to maximize color vibrancy and contrast, ensuring school logos, mascots, and artwork stand out clearly in the pit area during competition and televised events
• School Branding on a High-Visibility Surface – Turns the landing system into a permanent branding opportunity at every home meet — coaches, athletes, officials, and spectators all interact with the pit area, making the weather cover one of the most visible pieces of real estate in a track and field facility
• All-Weather Protection for Landing System Investment – Heavy-duty weather cover construction shields Gill high jump and pole vault landing system foam and casing materials from rain, UV exposure, debris, and moisture damage between practice sessions and competition days, significantly extending the service life of the underlying landing system
• Compatible with Gill Landing System Series – Designed to fit Gill's range of high jump and pole vault landing systems including the S4, S4 High Jump, and other compatible Gill pit configurations — confirm specific model compatibility when ordering to ensure proper fit and coverage
• Vector Artwork Required — 15-Day Production Lead Time – Custom graphic orders require submission of vector artwork in accepted file formats; Gill's artwork team reviews and approves submissions before production begins, with a standard 15-day lead time from artwork approval to shipment — plan orders in advance of season openers and championship hosting dates
• Durable Print and Cover Construction – Weather cover material is built to withstand repeated outdoor exposure across multiple seasons while retaining graphic clarity and color integrity, protecting both the artwork investment and the landing system beneath through years of active facility use

The Gill Weather Cover for the 66817 Pole Vault Pit is precision-fitted for the Gill 66817 model, delivering year-round protection from UV exposure, moisture, and airborne debris that degrade foam landing systems over time. For a pit that represents a five-figure investment, a purpose-built cover is a simple maintenance step that pays for itself many times over in extended equipment life and preserved landing performance.

Key features & specs:

• Built to exact 66817 specifications for complete, gap-free coverage
• Heavy-duty, weather-resistant material engineered for many outdoor seasons
• UV protection guards top pads and foam against sun damage
• Keeps rain, snow, and debris off the landing surface between meets

Coach's tip: Keep the pit covered whenever it is idle and clear standing water or snow before it pools in low spots. A water-shed insert underneath helps runoff, and drying the cover before folding prevents mildew and keeps the material flexible season after season.

The Gill Weather Cover for the 66517 Pole Vault Pit is cut to fit the Gill 66517 model precisely, shielding your landing system from sun, rain, and debris during storage between competitions and throughout the off-season. Using a fitted cover is the single most effective way to extend the service life of a pole vault pit, one of the largest line-item equipment costs in any track and field program, so this accessory pays for itself many times over in protected foam and preserved performance.

Key features & specs:

• Model-specific fit engineered for the Gill 66517 pole vault pit
• UV-resistant, weather-resistant material built for multiple outdoor seasons
• Full coverage with no gaps to keep moisture and debris off the landing surface
• Protects foam and top pads from sun damage and pooling water

Coach's tip: Cover the pit whenever it is not in use and brush off standing water or snow before it pools. Let the cover dry fully before folding for storage to prevent mildew and keep the material supple.

The Gill Weather Cover for the 66317 Pole Vault Pit provides a model-matched fit for the 66317 pit, protecting the foam landing system from the elements that cause the most damage: UV radiation, rain saturation, and windblown debris. A properly stored pit retains its cushioning and structural integrity far longer than one left exposed, making this cover an essential part of any facility's maintenance plan.

Key features & specs

• Model-matched to the Gill 66317 pole vault pit
• Shields foam from UV rays, rain, and windblown debris
• Weather-resistant material endures outdoor conditions without cracking or tearing
• Purpose-built to pair seamlessly with the 66317 model
• Protects the cushioning properties that keep vaulters safe

Maintenance tip: keep the pit covered any time it isn't in use to preserve the foam's cushioning. Clear debris and standing water before removing the cover, let both pieces dry before storing, and check the seams and tie-downs each season so it stays anchored on windy days.

The Gill Weather Cover for the 66217 Pole Vault Pit is model-matched to the 66217 pit precisely, delivering reliable protection from the UV degradation, moisture, and debris that break down foam landing systems over time. Keeping a proper cover on the pit whenever it's idle is one of the most important maintenance steps for extending the service life of a costly piece of equipment.

Key features & specs

• Model-matched to the Gill 66217 pole vault pit
• Protects against UV rays, moisture, and windblown debris
• Durable, weather-resistant material for multiple seasons of storage
• Purpose-built fit eliminates the gaps of improvised tarps
• A low-cost way to protect a major facility investment

Maintenance tip: cover the pit between practices and meets, not just over winter, to slow everyday foam aging. Brush off debris and drain water before removing it, dry both pit and cover before storage, and inspect the fasteners each season so the cover holds in wind.

The Gill Weather Cover for the 65817 Pole Vault Pit is purpose-built for the 65817 model, giving programs a precise, gap-free fit that protects the landing system from sun, rain, and debris whenever the pit is out of use. Because a pole vault pit is a long-term facility investment, proper storage under a fitted cover dramatically reduces the foam degradation caused by outdoor exposure.

Key features & specs

• Purpose-built for the Gill 65817 pole vault pit
• Precise fit protects against UV rays, rain, and windblown debris
• Holds up through multiple seasons without tearing or losing effectiveness
• Model-specific manufacturing ensures a secure, exact fit
• A smart, low-cost way to extend the life of an expensive pit

Maintenance tip: cover the pit between sessions, not just seasonally, to protect the foam from daily UV exposure. Clear debris and standing water before removing the cover, let both pieces dry before storage, and check the tie-downs each season so it stays secure in high wind.

The Gill Weather Cover for the 65417 Pole Vault Pit fits the 65417 model precisely, shielding the landing foam from the UV rays, rain, and debris that do the most damage between competitions and through the off-season. Pole vault pits are among the most expensive pieces of equipment in a track program, which makes a fitted cover one of the highest-return maintenance items you can buy.

Key features & specs

• Model-matched to the Gill 65417 pole vault pit for a precise fit
• Blocks UV degradation and moisture that break down foam
• Secure coverage that resists wind blow-off and water pooling
• Durable material engineered for multiple outdoor seasons
• Purpose-built alternative to universal tarps that leave gaps

Maintenance tip: keep the pit covered any time it's idle to slow everyday UV aging of the foam. Sweep off debris and drain standing water before removing the cover, dry both pieces before storage, and inspect the fasteners each season so the cover stays put on windy days.

The Gill Weather Cover for the 653 Pole Vault Pit is the purpose-built cover for the Gill Essentials Pole Vault Pit, protecting one of the largest equipment investments in your track program from the elements. Pole vault pit foam is highly susceptible to UV rays, rain, and debris, and a fitted cover is the simplest, most cost-effective way to keep the landing system performing season after season.

Key features & specs

• Sized specifically for the Gill Essentials Pole Vault Pit (19'9" x 20'2" x 26")
• Shields foam landing units from UV exposure, rain, and debris
• Model-matched fit stays secure and resists pooling and blow-off
• Weather-resistant material built for repeated outdoor seasons
• Available in Royal Blue only to match the Essentials pit

Maintenance tip: cover the pit whenever it isn't in active use, not just over the off-season, to get the most foam-saving benefit. Let the pit and cover dry before storing them together, clear off debris and standing water regularly, and check the seams and tie-downs so the cover stays anchored in wind.

The Gill Weather Cover for the 64817 High Jump Pit is engineered to fit the 64817 pit model precisely, protecting the landing foam from rain, sun, and debris during storage and off-season periods. A weather cover significantly extends the lifespan of a high jump pit by preventing the UV degradation and moisture absorption that steadily break foam down — making it one of the smartest small investments a program can make.

Key features & specs

• Precisely sized for the Gill 64817 high jump pit
• Shields foam from UV rays, moisture, and windblown debris
• Holds its shape and protective properties through years of use
• Model-specific design means no awkward fitting or improvised tie-downs
• Weather-resistant material built for demanding outdoor conditions

Maintenance tip: keep the pit covered any time it isn't in use to get the full benefit, not just over winter. Sweep off debris and let everything dry before storing, and give the seams and fasteners a quick check each season so the cover stays secure when the wind picks up.

The Gill Weather Cover for the 64417 High Jump Pit is designed to match the 64417 pit model precisely, shielding the foam landing units from the UV exposure, rain, and debris that accelerate breakdown in outdoor track facilities. Covering a pit whenever it's idle is one of the simplest, most cost-effective maintenance habits a program can adopt to protect a significant equipment investment.

Key features & specs

• Model-specific fit for the Gill 64417 high jump pit
• Guards against UV damage, rain saturation, and airborne debris
• Secure, gap-free coverage that won't sag or pool water
• Built from durable material that endures repeated outdoor seasons
• Purpose-made to match the 64417's exact dimensions

Maintenance tip: don't wait for the off-season — cover the pit between practices and meets to slow everyday UV aging. Brush off debris and drain any standing water before removing it, dry both pieces before storage, and inspect the tie-downs annually so the cover holds in high wind.

The Gill Weather Cover for the 64217 High Jump Pit is custom-fitted to the 64217 pit model, giving programs an easy, reliable way to protect their landing system between competitions and through the off-season. Sun, rain, and debris are the enemies of foam, and leaving a pit uncovered can cut years off its life — a snug, model-specific cover keeps the pit in competition shape far longer.

Key features & specs

• Custom-fitted for the Gill 64217 high jump pit
• Protects foam from UV rays, moisture, and windblown debris
• Snug fit prevents water pooling and stays put in wind
• Weather-resistant material engineered for years of outdoor use
• Eliminates the gaps and slippage of universal-fit tarps

Maintenance tip: make covering the pit part of your after-practice routine so it's protected every day, not just seasonally. Clear off leaves and standing water regularly, allow the cover and pit to dry before storing, and check the seams and fasteners at the start of each season.

The Gill Weather Cover for the 64117 High Jump Pit is engineered to fit the 64117 pit model exactly, protecting the foam landing system from the three things that damage it most: UV radiation, rain, and windblown debris. For equipment that represents a major line-item in any track budget, a fitted cover is a low-cost insurance policy that pays for itself in years of extended pit life.

Key features & specs

• Model-matched to the Gill 64117 high jump pit for a precise, gap-free fit
• Blocks UV degradation and moisture absorption that break down foam
• Secure fit resists blow-off in wind and water pooling in rain
• Durable weather-resistant material built for multiple outdoor seasons
• Purpose-built alternative to improvised tarps and universal covers

Maintenance tip: cover the pit any time it isn't in use rather than only over winter — everyday sun exposure is what quietly ages the foam. Sweep off debris before removing the cover, let both pit and cover dry fully before storage, and inspect the tie-downs each season so it stays anchored on windy days.

The Gill Weather Cover for the 640A High Jump Pit is a purpose-built cover for the Gill Essentials High Jump Pit, protecting one of your program's biggest equipment investments from the elements. A high jump pit's foam is highly vulnerable to UV rays, rain, and windblown debris, all of which shorten its usable life — a fitted weather cover is the single most cost-effective way to keep it performing season after season.

Key features & specs

• Sized specifically for the Gill Essentials High Jump Pit (16' x 8' x 24")
• Shields foam landing units from UV exposure, rain, and debris
• Model-matched fit stays secure and resists pooling or sagging
• Weather-resistant material built for repeated outdoor seasons
• Available in Royal Blue only to match the Essentials pit

Maintenance tip: put the cover on whenever the pit isn't in active use, not just over the off-season, to maximize foam life. Let the pit and cover dry before storing them together, brush off standing debris regularly, and check the seams and tie-downs periodically so the cover stays secure in wind.