Throwing Event Equipment

Keep your throwers sharp through the winter with the Gill Indoor Rubber Discus. Engineered specifically for indoor training, its solid one-piece rubber body won't scuff gym floors or mark walls, so athletes can drill full spins and releases inside without damaging your facility. At the 1K weight, it's ideal for developing throwers and younger athletes building technique in the off-season, giving your program a safe, floor-friendly way to train discus year-round no matter the weather outside. When the season turns and reps matter most, it keeps your throwers progressing indoors.

Key features & specs

• Solid one-piece construction for long-lasting durability
• Non-marking design won't scuff gym floors or walls
• 1 kilogram (1K) training weight for developing and youth throwers
• Meets NFHS specifications
• Purpose-built for indoor off-season practice

Coach's tip: set up a netted throwing lane or throw into a padded wall so athletes can rep releases safely indoors. Care: wipe clean after use, store in a dry equipment room, and inspect periodically for surface wear to keep it floor-safe.

The Gill Shot/Hammer Circle Form in aluminum gives throws programs a permanent, competition-legal foundation for shot put and hammer events. Designed for in-ground installation, the four-section form bolts together into a perfectly true circle and serves as the mold for a smooth, crack-resistant concrete pour — delivering the consistent, level throwing surface athletes and officials expect at sanctioned meets. Once set, it becomes a fixed part of your facility that will handle years of daily practice and competition without shifting or degrading.

Key features & specs

• Four sections of 2" x 3" aluminum angle that bolt together to form the circle
• Built for permanent in-ground installation
• Aluminum exterior bracing creates a strong, rigid frame that holds shape during the pour
• Open center allows a smooth concrete pour and a crack-resistant finished surface
• Inner circle constructed of 1/4" x 3" flat aluminum bar
• Compatible with Gill toeboards 358 and 363
• Meets NFHS, NCAA, and World Athletics specifications

Coach's tip: Pair the form with a matching Gill toeboard (358 or 363) so your circle is meet-ready from day one. Care: Aluminum construction is corrosion-resistant; keep the circle surface swept clear of debris and standing water to preserve traction and extend service life.

Install a heavier-duty permanent throwing circle with the Gill Shot/Hammer Circle built from 2" x 2" extruded aluminum angle. The deeper angle profile gives this cast-in-concrete ring extra structural mass and edge definition, standing up to years of shot put and hammer competition while holding the precise regulation dimensions throwers depend on for legal, consistent footing.

Key features & specs

• Two sections of 2" x 2" extruded aluminum angle for a robust, deeper-profile permanent circle
• Designed to be cast into concrete for a durable, flush in-ground installation
• Heavier angle stock provides added structural mass and a well-defined circle edge
• Compatible with toeboards 358 and 363 to complete a shot put or hammer setup
• Meets NFHS, NCAA, and World Athletics specifications for competition-legal throwing
• Regulation dimensions for consistent, certified footing meet after meet

Coach's tip: level and align the circle precisely before pouring, as the installation is permanent once the concrete cures — a flush, true edge is critical for both safety and legal throws. Match it with the correct compatible toeboard for your event, and keep the aluminum rim clear of dirt and debris so throwers get clean, reliable traction.

Set a permanent, certified throwing circle into your throws area with the Gill Shot/Hammer Circle in extruded aluminum. Designed to be cast directly into concrete, this four-section angle-aluminum ring becomes a durable, maintenance-free part of your facility — delivering the exact regulation dimensions and clean rim edge that shot put and hammer throwers need for consistent, legal footing.

Key features & specs

• Four sections of 1" x 3/4" extruded aluminum angle for a lightweight, corrosion-resistant permanent circle
• Designed to be cast into concrete for a durable, flush, in-ground installation
• Discus-circle capable: the circle can also be surface-mounted for discus applications
• Compatible with toeboards 358 and 363 to complete a shot put or hammer setup
• Meets NFHS, NCAA, and World Athletics specifications for competition-legal throwing
• Regulation dimensions for consistent, certified footing

Coach's tip: position and level the circle carefully before the pour, since it becomes permanent once the concrete sets — a flush, true ring is essential for safe footing and legal throws. Pair it with the correct compatible toeboard for your event, and keep the aluminum rim clean and clear of grit so athletes get consistent traction at the front of the circle.

Build a competition-legal throwing circle that holds its shape for the life of your facility with the Gill Shot/Hammer Circle with cross bracing. Its two-section extruded-aluminum design with welded bracing bolts together into a rigid, true ring that resists the distortion cheaper circles suffer during in-ground installation — giving throwers a consistent, certified footing meet after meet.

Key features & specs

• Two sections of 1/4" x 3" extruded aluminum with welded bracing for maximum rigidity
• Bolts together to maintain true circular form during in-ground concrete installation
• Mounting hardware included for a complete, ready-to-set installation
• Compatible with toeboards 368 and 363 to complete a shot put or hammer setup
• Meets NFHS, NCAA, and World Athletics specifications
• World Athletics certified for sanctioned competition

Coach's tip: assemble and bolt the circle fully before the concrete pour so it locks in a perfectly round shape, and set it flush and level with the surrounding surface for safe footing. Pair it with the correct compatible toeboard for your event, and keep the aluminum clear of debris so throwers have clean, consistent traction.

Handcrafted in the USA, the OTE 90 Competition is the same javelin Jan Železný threw to achieve his 98.48m world record back in 1996 – a record that still stands today. Invented and perfected by Dick Held, the OTE 90 now sports a nostalgic look in honor of that legendary throw.

The ST1 Sports 4 kg / 8.8 lb. Cast Iron Shot Put is the official-weight implement for women's competition and a workhorse for any throws program. Crafted from symmetrically balanced cast iron, it delivers a smooth, predictable release throw after throw — the consistency athletes need to groove their technique and coaches need to trust in a meet setting. Calibrated to a strict tolerance, this shot meets the specs for high school girls, women's collegiate and professional competition, and junior boys (international). Durable, dependable, and priced for programs stocking a full throws cage, it's built to survive seasons of ring work.

Key features & specs:

• Weight: 4 kg (8.8 lbs), calibrated to a -0 / +0.05 kg tolerance
• Diameter: 4.1"; circumference: 13"
• Solid, symmetrically balanced cast-iron construction
• Smooth surface for a clean, predictable release
• Official weight for women's collegiate/pro and high school girls
• Also used for junior boys (international) competition

Coach's tip: Reserve this shot for track and paved throwing surfaces — it is not designed for use in gravel pits. Care: Wipe down after use, store dry to prevent surface rust, and inspect for chips before each session.

Outfit your boys' throws program in one purchase with the Blazer Boy's Implement Value Package. This complete bundle gives developing throwers a full set of 1.6K discus in three constructions plus a pair of 12 lb shots and carrying bags — everything a coach needs to run practice across discus and shot put without sourcing each piece separately.

Key features & specs:

• #1337 1.6K Boys Rubber Discus, #1340 1.6K Boys Laminate Discus, and #1350 1.6K Boys Lazer Discus
• #1980 12 lb Boys Iron Shot and #2212 12 lb Boys Turned Steel Shot
• Two #2155 Shot/Discus Bags with shoulder straps for easy transport
• Covers the boys' high school competition weights for discus and shot
• Complete package weighs 38 lbs

A cost-effective, ready-to-go package for high school boys' throws programs. Match each implement to your athletes' event and competition weight, use the included bags to carry implements to the ring, and inspect the discs and shots periodically for damage. Store everything dry in the bags so your implements stay true and ready for every practice and meet.

Define a regulation throwing circle for the hammer with the Blazer Hammer Ring. Built from durable aluminum angle in easy-to-handle sections, it anchors into your throwing area to form a clean, permanent circle — meeting IAAF, NCAA, and NFHS rules so your hammer venue is competition-ready at every level.

Key features & specs:

• 1" x 3/4" x 1/4" aluminum angle construction
• Ships in 4 sections for easier handling and installation
• Anchor holes provided for secure ground mounting
• Meets IAAF, NCAA, and NFHS rules
• Dimensions 73" x 17" x 2" (13 lbs)

A durable, rules-compliant circle for high school and collegiate throws programs building or upgrading a hammer venue. Assemble the four sections and anchor the ring flush with the throwing surface per competition specs, confirming it's level and secure before use. Keep the ring clear of debris and inspect the anchors periodically so your hammer circle stays safe and competition-ready for years.

Set a regulation shot put circle with the Blazer Shot Put Ring. Constructed from durable aluminum angle in easy-to-handle sections, it anchors into your throwing area to form a clean, permanent circle — built to IAAF, NCAA, and NFHS specifications so your shot put venue is competition-ready at every level.

Key features & specs:

• 1" x 3/4" x 1/4" aluminum angle construction
• Ships in 3 sections for easier handling and installation
• Anchor holes provided for secure ground mounting
• Regulation 7' ring diameter
• Meets IAAF, NCAA, and NFHS rules (25 lbs)

A durable, rules-compliant circle for high school and collegiate throws programs building or upgrading a shot put venue. Assemble the three sections and anchor the ring flush with the throwing surface per competition specs, pairing it with a regulation toe board and confirming it's level and secure before use. Keep the ring clear of debris and inspect the anchors periodically so your circle stays competition-ready for years.

Define a regulation throwing circle with the Blazer Discus Ring. Built from sturdy aluminum angle in easy-to-handle sections, it installs into your discus area with anchor holes for a secure, permanent circle — meeting IAAF, NCAA, and NFHS rules so your throws area is competition-ready at every level.

Key features & specs:

• 1" x 3/4" x 1/4" aluminum angle construction
• Ships in 4 sections for easier handling and installation
• Anchor holes provided for secure ground mounting
• Regulation 8'2-1/2" ring diameter
• Meets IAAF, NCAA, and NFHS rules (14 lbs)

A durable, rules-compliant circle for high school and collegiate throws programs building or upgrading a discus venue. Assemble the four sections and anchor the ring flush with the throwing surface per competition specs, confirming it's level and secure before use. Keep the ring clear of debris and inspect the anchors periodically so your discus circle stays safe and competition-ready for years.

Groove the spin without the coach hovering over every rep: the Blazer Discus Trainer is the perfect tool for teaching rotational technique in the discus and shot put. Durable yet lightweight and easy to move, it lets athletes get high-quality reps on their own — freeing coaches to work with other events while throwers build muscle memory.

Key features & specs:

• Trains spin technique for both discus and shot put
• Durable but lightweight and easy to move around
• Designed for solo use — athletes get reps without constant supervision
• Adjustable to fit any athlete
• Used at the collegiate, high school, and middle school levels

A versatile training aid for throws coaches developing technique across a full squad and every skill level. Set it up for repeated rotational reps so athletes can self-train while you coach other groups, and adjust it to fit each thrower. Wipe it down after use and store it in a dry space so it's ready for the next practice session.

Keep your throws area durable and measurement-friendly with the Blazer Metal Toe Board. Built to resist warping, splitting, and weather deterioration, it stands up to the demands of shot put competition — and radiating lines on its surface help officials line up and speed accurate measurements after every throw.

Key features & specs:

• Durable metal construction won't warp, split, or deteriorate in weather
• Radiating lines speed up accurate measurement
• Built to withstand repeated shot put impact
• Regulation stop-board profile for competition
• A low-maintenance choice for year-round outdoor use

A dependable, weatherproof toe board for high school and collegiate throws programs. Secure it at the front of your shot put circle per competition specs before each meet, and confirm it's firmly anchored and undamaged before use. Wipe it clean of grit and dirt after sessions and store it in a dry space between seasons so it stays accurate and competition-ready for years.

Get the durability of metal in a competition stop board with the Blazer Aluminum Toe Board. Its cast aluminum construction is built for years of heavy use, and a recessed design fits your throwing ring cleanly — with end tie-downs to keep it locked in place through every shot put attempt.

Key features & specs:

• Cast aluminum construction for long-lasting durability
• Recessed design to seat cleanly against the ring
• Tie-downs provided on each end for secure anchoring
• Meets all rule specifications for shot put competition
• Dimensions 55" x 11" x 4" (27 lbs)

A rugged, competition-grade toe board for high school and collegiate throws programs that want a board built to last. Secure it at the front of your shot put circle with the end tie-downs before each meet, and confirm it's firmly anchored and undamaged before use. Wipe it clean of grit after sessions and store it in a dry space between seasons so it stays competition-ready for years.

Give your shot put circle a lightweight, weather-tough stop board with the Blazer Fiberglass Toe Board. Molded to conform to official rules, its weather-resistant, colorfast fiberglass build stands up to the elements and repeated impact — with tie-downs on each end so it stays firmly secured through every throw.

Key features & specs:

• Molded fiberglass conforms to official competition rules
• Weather-resistant and colorfast for lasting outdoor use
• Tie-downs provided on each end for secure anchoring
• Lightweight yet durable under repeated shot put impact
• Dimensions 53" x 14" x 6" (10 lbs)

A practical, rules-compliant toe board for high school and collegiate throws programs. Secure it at the front of your shot put circle using the end tie-downs before each meet, and confirm it's firmly anchored and undamaged before use. Wipe it clean of grit after sessions and store it in a dry space between seasons so it stays competition-ready for years.

Anchor your shot put circle with the tough, weatherproof Blazer Rigid Polyurethane 4' Toe Board. Its cross-linked interior design gives it extreme strength to stand up to the pounding of shot put competition, while a waterproof, UV-protected build means it holds up outdoors season after season without cracking or fading.

Key features & specs:

• Rigid polyurethane construction with a cross-linked interior for extreme strength
• Waterproof and UV-protected for lasting outdoor durability
• Regulation stop-board dimensions for shot put competition
• Withstands repeated impact without cracking or deteriorating
• Dimensions 55" x 12" x 5" (13 lbs)

A durable, low-maintenance toe board for high school and collegiate throws programs. Secure it at the front of your shot put circle per competition specs before each meet, and check that it's firmly anchored and undamaged before use. Wipe it clean of grit after sessions and store it in a dry space between seasons so it stays competition-ready for years.

Haul heavy loads across the infield with the Blazer Equipment Wagon. Its heavy-gauge steel-mesh bed and towable design let coaches and grounds crews move hurdles, implements, cones, and gear in bulk — turning multiple equipment trips into one, before and after every practice and meet.

Key features & specs:

• Heavy-gauge steel-mesh bed with fold-down sides for easy loading
• Towable design for moving big loads efficiently
• Pneumatic 13" wheels roll smoothly over grass and rough terrain
• 6.0 cu. ft. capacity with a 1,000 lb weight limit
• Bed dimensions 44.9"L x 23.2"W x 25.9"H (78 lbs)

A rugged workhorse for track programs and grounds crews that move gear all season. Distribute heavy loads evenly and secure long items before towing, keep the tires properly inflated for the smoothest ride, and rinse off mud and store the wagon under cover to protect the steel bed and extend its working life for years.

Keep your entire throws inventory organized and mobile with the Blazer Implement Rack. Built from heavy-duty tubular steel, this rolling rack holds a full complement of discus, shots, and hammers in one place — so coaches can wheel every implement from the storage room to the ring in a single trip and always know exactly what's on hand.

Key features & specs:

• Holds 14 assorted discus, 14 shot puts, and 14 hammers
• Heavy-duty tubular steel construction for years of use
• 8" fixed semi-pneumatic wheels roll over rough terrain
• 5" swivel solid-rubber casters on the front for easy maneuvering
• Base footprint 36"W x 36"H x 27"D (82 lbs)

An excellent organizational upgrade for high school and collegiate throws programs managing a large implement inventory. Load implements evenly and chock the rack when parked, wipe the steel frame down after wet or muddy sessions to prevent rust, and store it indoors so both the rack and your implements stay in top condition season after season.

Give your developing throwers a discus built for progress: the Gill Vibe 1.6K Discus. This 1.6-kilogram mid-spin discus pairs durable ABS plastic side plates with a high-quality steel rim, delivering the balanced weight distribution and reliable flight that help athletes groove their technique and build confidence in the ring.

Key features & specs:

• 1.6K weight — a common training and competition weight for developing throwers
• Mid-spin design for balanced flight and controllable rotation
• Durable ABS plastic side plates
• High-quality steel rim for consistent weight distribution
• Meets NFHS, NCAA, and World Athletics specifications

A dependable choice for coaches outfitting their throws program with quality, spec-compliant discus. Match the weight to your athletes' competition class, inspect the rim and plates periodically for damage, and store your discus in a carrier or implement cart in a dry space so they stay true and ready for every practice and meet.

• Made for temporary indoor or outdoor use.  Quick easy setup and portable.  16 segments and a perfect circle anywhwere you have space.
• This is a lightweight modular Shot Put, Hammer, Weight Throw Circle.

• Made for temporary indoor or outdoor use.  Quick easy setup and portable.  16 segments and a perfect circle anywhwere you have space.
• This is a lightweight modular Discus Throw Circle.