Pole Vault Equipment & Poles

The Gill Vault Trainer System is a unique device that helps beginner and intermediate vaulters safely rehearse the body positions that occur at peak vault height. By letting athletes acclimate to being inverted and rotating around the pole, it builds the coordination and confidence that are hard to develop on the runway alone, while strengthening the muscle groups responsible for an effective push-off.

Key features & specs:

• Trains body positions at peak vault height for beginners and intermediates
• Strengthens muscle groups for an effective push-off
• Coordinates grip and pole positions through the rotation and push-off
• Hangs from goal posts or basketball backboard rigging
• Complete with cables, ankle cuffs, and pole section

Coach's tip: Mount it to a rigid, properly rated structure and supervise athletes closely as they learn the inverted positions. Inspect the cables and cuffs before every session for wear, and take the system down and store it dry between uses to protect the hardware.

The Gill Rolling Pole Cart is a sturdy, high-end storage and transport solution built to hold all the vaulting poles your program owns. Heavy steel construction keeps poles organized and protected, while dual-purpose wheels switch from swivel to locked with the pull of a pin, so moving a full load of poles from storage to practice and back is quick and controlled. It is the organized, damage-free way to manage a growing pole inventory.

Key features & specs:

• Sturdy steel construction with a high-end design
• Holds a full program's inventory of vaulting poles
• Dual-purpose wheels switch from swivel to locked with a pull pin
• Keeps poles organized, separated, and protected
• Compatible with the optional 735 Tow Bar Kit

Coach's tip: Lock the wheels once the cart is in position so it can't roll while athletes pull poles, and add the 735 Tow Bar Kit for easy long-distance moves. Wipe the frame down and store it indoors to protect the finish and prevent rust.

The Gill Rolling Pole Cart Tow Bar Kit upgrades your Gill Rolling Pole Cart for effortless transport across the infield and around the facility. The tow bar attaches to the cart and lets a single person pull a fully loaded rack of vaulting poles smoothly from storage to the runway and back, saving time and reducing the risk of dropping or damaging expensive poles on the way.

Key features & specs:

• Tow bar accessory for the Gill Rolling Pole Cart
• Enables easy one-person towing of a loaded pole cart
• Steel construction to match the cart's durable build
• Speeds up moving poles between storage and the runway
• Simple bolt-on attachment

Coach's tip: Confirm you have the compatible Gill Rolling Pole Cart before ordering, since this is an add-on accessory. Tow slowly over rough or uneven ground to keep poles secure, and store the kit with the cart so it is always ready for meet day.

The Gill AGX M4 Pole Vault Standards package (with pad and upright) delivers a complete, premium standard solution for high school and collegiate programs that want top-tier safety and performance out of the box. The AGX system pairs Gill's flagship upright design with integrated base pads and uprights, and the M4 configuration is sized to work with Gill's largest pit systems so the whole facility meets the most demanding safety specifications.

Key features & specs:

• Complete AGX standard package including pad and upright
• Flagship AGX upright design for premium performance
• Integrated base pads for athlete protection at the standard base
• M4 configuration matched to Gill's largest pit systems
• Built for competition-ready high school and collegiate facilities

Coach's tip: Confirm the M4 configuration matches your pit size before ordering so the standards and pads fit your system. Anchor the bases securely, match the crossbar height on both uprights, and store the pads dry in the off-season to protect the foam and covers.

The Gill Cast Aluminum Vault Box is a rugged, competition-legal plant box built to perform through years of hard vaulting. Cast in a single piece of 100% aluminum with a 3/8" wall thickness, it is guaranteed against cracking or warping under the repeated impact of pole plants. Rounded inside corners let the pole rotate freely through the plant, and a durable white powder-coat finish stands up to weather and heavy use.

Key features & specs:

• 100% cast aluminum with a 3/8" wall thickness
• Rounded inside corners for unhindered pole rotation
• Durable white powder-coat finish
• Guaranteed against cracking or warping
• Meets High School and NCAA specifications; World Athletics certified

Coach's tip: Pair the box with the leg installation kit for accurate leveling during setup, and keep the interior clear of grit that can scuff pole tips. Inspect the plant surface each season and touch up the finish as needed to protect against corrosion.

The Gill Pole Vault Box Leg Installation Kit takes the guesswork out of setting a vault box at the correct depth and level during installation. Four L-shaped steel legs bolt to the box and let the installer fine-tune its position for precise leveling before the surrounding surface is poured, ensuring the box sits exactly where safety and performance require. It is an essential companion for any permanent Gill vault box installation.

Key features & specs:

• Four L-shaped steel legs for stable, adjustable support
• Enables precise leveling of the vault box during installation
• Anchoring hardware included
• Compatible with Gill 500, 502, and 504 vault boxes
• Simplifies achieving correct box depth and alignment

Coach's tip: Confirm your box is a Gill 500, 502, or 504 before ordering, and check the box for level in both directions before the surrounding surface is set. Have your installer double-check the plant-line position, since the box location is fixed once the runway is poured.

The Gill Crossbar Putter Upper is the simplest crossbar placer ever made, a must-have tool for any pole vault or high jump setup. It slips over the end of any vaulting pole, letting a coach or athlete reset the crossbar quickly and safely without a ladder or awkward reaching after a knock-down. That means faster resets between attempts, a smoother-running competition, and less wear and tear on both the crossbar and the people handling it.

Key features & specs:

• Fits over the end of any vaulting pole
• Simplest crossbar placer design available
• Resets the bar without a ladder or overreaching
• Speeds up resets between vault and high jump attempts
• Lightweight and easy to store with your event equipment

Coach's tip: Keep the Putter Upper stationed at the standards during meets so officials can reset the bar instantly. Store it with your pole vault kit so it is always on hand, and wipe it down to keep the pole end clean.

The Gill Essentials Pole Vault Standards deliver dependable, competition-legal performance at a value price, making them a smart choice for schools building or refreshing a pole vault program. Full steel tubing construction gives these standards the strength to stand the test of time, while a wide-stance base adds the stability vaulters and coaches count on. Height adjusts from 6' to 16' with both English and metric readings, covering the full range of high school and developmental competition.

Key features & specs:

• Full steel tubing construction for lasting durability
• Height adjustment from 6' to 16' with English and metric scales
• Wide-stance base for added stability
• Uprights detach from base rails for compact storage
• Includes 75mm bar rest pins and 8 base anchors; meets NFHS specification; 5-year warranty

Coach's tip: Anchor the base securely before every session and match the bar-rest height on both standards for an even crossbar. Detach the uprights for storage and keep them indoors to protect the finish and extend service life.

The Gill Water Shed Insert is a simple device that meaningfully extends the life of your high jump and pole vault landing systems. Placed under the weather cover, it prevents water from pooling in the natural low spots that form on a pit's surface, stopping the standing water that stretches covers, seeps into seams, and accelerates foam breakdown. For a small investment, it protects one of the largest equipment expenses in your program.

Key features & specs:

• Prevents water pooling on the weather cover's low spots
• Works with high jump and pole vault landing systems
• Promotes runoff to protect the cover and foam beneath
• Simple to position under any fitted weather cover
• Low-cost way to extend landing-system service life

Coach's tip: Position the insert under the cover at the pit's lowest points so water sheds toward the edges, and check it after heavy rain or snow. Pair it with a properly fitted weather cover for the best protection, and store it with the cover in the off-season.

The Gill High Jump Standard Base Pads add an important layer of safety to the high jump area by cushioning the exposed bases of the standards, where athletes can make incidental contact as they clear the bar and land. Each pad wraps the base in dense foam encased in bright yellow vinyl, both softening impact and clearly marking the standard for jumpers and officials. Sold in pairs so both standards are protected for a complete, compliant setup.

Key features & specs:

• 19" x 19" x 2" thick foam pad for impact protection
• Encased in high-visibility yellow vinyl
• Cushions the exposed high jump standard bases
• Bright color improves visibility for athletes and officials
• Sold in pairs for both standards

Coach's tip: Seat the pads firmly around each standard base and check placement before every session, since bases shift during setup. Wipe them down and store them dry in the off-season to protect the vinyl and keep the foam resilient for years of use.

Gill Ninja Elite Pole Vault Grip Tape is the grip that lets vaulters hold lighter and grip tighter, even in wet or oily conditions. Engineered with thousands of tiny gripping "fingers," the tape delivers dependable purchase on the pole without chalk, sticky sprays, or other additives, so athletes get a clean, consistent grip and an easy release every time. It is a favorite for vaulters chasing higher heights who want confidence in their top hand through the plant and takeoff.

Key features & specs:

• Thousands of gripping fingers for a lighter hold with more security
• Performs in wet and oily conditions
• Slip-resistant with vibration-dampening properties
• Easy-release feel with no chalk or sticky spray required
• Roll size: 1" x 9'

Coach's tip: Wrap the tape smoothly over the pole's grip zone with slight tension and no overlap gaps for the best feel. Replace it once the fingers wear smooth, and store poles in a cool, dry rack to keep the grip surface tacky.

The Gill Portable Pole Rack is the convenient, secure way to store and protect vaulting poles during meets and practice. Free-standing and built from heavy-duty steel with a powder-coat finish, it keeps expensive poles organized, off the ground, and easy to grab between attempts. Individual rungs cradle each pole so they stay separated and protected from the nicks and scratches that come with piling poles on the infield.

Key features & specs:

• Free-standing heavy-duty steel frame
• Durable powder-coat finish for indoor and outdoor use
• Rungs hold each pole in place and allow quick, easy access
• Keeps poles organized, elevated, and protected at meets and practice
• Portable design moves easily from storage to the runway

Coach's tip: Load heavier training poles toward the base of the rack for stability and keep it on level ground during meets. Wipe the frame down and store it dry to preserve the powder coat and prevent rust over time.

The Gill Box Collar Spike Plates Kit keeps your pole vault box collar locked in the correct position throughout competition and practice. The set of four tapped plates attaches at each bottom corner of the collar with hook-and-loop tabs, then anchors into the ground to stop the collar from creeping or slipping underneath the landing pit. It is an inexpensive but essential companion to any vault box collar, preserving both safety coverage and a clean plant area.

Key features & specs:

• Set of 4 tapped spike plates for each bottom corner of the collar
• Attaches with Velcro tabs for quick installation and removal
• Anchors the collar to prevent slipping under the pit
• Includes a pack of 100 3/8" pyramid spikes
• Accepts larger spikes if ground conditions require them

Coach's tip: Check the spike engagement before every meet, especially on soft or rain-soaked ground, and swap to longer spikes if the collar shifts. Store the plates and spikes with the collar so the setup stays complete.

The Gill SafetyMax+ Vault Box Collar adds a critical layer of protection to the pole vault plant area by padding the exposed hard surfaces around the vault box, one of the highest-risk points on the runway. Winged arms extend down into the box for added coverage, and the safety-yellow color clearly highlights the open area where vaulters plant the pole. It works with any style of pole vault landing system, making it a smart upgrade for any program.

Key features & specs:

• Pads exposed hard surfaces around the vault box for athlete protection
• Winged arms extend into the box for added coverage
• High-visibility safety-yellow color marks the plant area
• Complies with ASTM standard F2949
• Compatible with any style of pole vault landing system; Patent No. 8,444,531 B1

Coach's tip: Pair the collar with box collar spike plates to keep it anchored and prevent it from sliding under the pit. Wipe it down and store it dry in the off-season to preserve the padding and the bright safety color.

The Gill Weather Cover for the 66517 Pole Vault Pit is cut to fit the Gill 66517 model precisely, shielding your landing system from sun, rain, and debris during storage between competitions and throughout the off-season. Using a fitted cover is the single most effective way to extend the service life of a pole vault pit, one of the largest line-item equipment costs in any track and field program, so this accessory pays for itself many times over in protected foam and preserved performance.

Key features & specs:

• Model-specific fit engineered for the Gill 66517 pole vault pit
• UV-resistant, weather-resistant material built for multiple outdoor seasons
• Full coverage with no gaps to keep moisture and debris off the landing surface
• Protects foam and top pads from sun damage and pooling water

Coach's tip: Cover the pit whenever it is not in use and brush off standing water or snow before it pools. Let the cover dry fully before folding for storage to prevent mildew and keep the material supple.

The Gill Weather Cover for the 66817 Pole Vault Pit is precision-fitted for the Gill 66817 model, delivering year-round protection from UV exposure, moisture, and airborne debris that degrade foam landing systems over time. For a pit that represents a five-figure investment, a purpose-built cover is a simple maintenance step that pays for itself many times over in extended equipment life and preserved landing performance.

Key features & specs:

• Built to exact 66817 specifications for complete, gap-free coverage
• Heavy-duty, weather-resistant material engineered for many outdoor seasons
• UV protection guards top pads and foam against sun damage
• Keeps rain, snow, and debris off the landing surface between meets

Coach's tip: Keep the pit covered whenever it is idle and clear standing water or snow before it pools in low spots. A water-shed insert underneath helps runoff, and drying the cover before folding prevents mildew and keeps the material flexible season after season.

The Gill Weather Cover for the 66317 Pole Vault Pit provides a model-matched fit for the 66317 pit, protecting the foam landing system from the elements that cause the most damage: UV radiation, rain saturation, and windblown debris. A properly stored pit retains its cushioning and structural integrity far longer than one left exposed, making this cover an essential part of any facility's maintenance plan.

Key features & specs

• Model-matched to the Gill 66317 pole vault pit
• Shields foam from UV rays, rain, and windblown debris
• Weather-resistant material endures outdoor conditions without cracking or tearing
• Purpose-built to pair seamlessly with the 66317 model
• Protects the cushioning properties that keep vaulters safe

Maintenance tip: keep the pit covered any time it isn't in use to preserve the foam's cushioning. Clear debris and standing water before removing the cover, let both pieces dry before storing, and check the seams and tie-downs each season so it stays anchored on windy days.

The Gill Weather Cover for the 66217 Pole Vault Pit is model-matched to the 66217 pit precisely, delivering reliable protection from the UV degradation, moisture, and debris that break down foam landing systems over time. Keeping a proper cover on the pit whenever it's idle is one of the most important maintenance steps for extending the service life of a costly piece of equipment.

Key features & specs

• Model-matched to the Gill 66217 pole vault pit
• Protects against UV rays, moisture, and windblown debris
• Durable, weather-resistant material for multiple seasons of storage
• Purpose-built fit eliminates the gaps of improvised tarps
• A low-cost way to protect a major facility investment

Maintenance tip: cover the pit between practices and meets, not just over winter, to slow everyday foam aging. Brush off debris and drain water before removing it, dry both pit and cover before storage, and inspect the fasteners each season so the cover holds in wind.

The Gill Weather Cover for the 65817 Pole Vault Pit is purpose-built for the 65817 model, giving programs a precise, gap-free fit that protects the landing system from sun, rain, and debris whenever the pit is out of use. Because a pole vault pit is a long-term facility investment, proper storage under a fitted cover dramatically reduces the foam degradation caused by outdoor exposure.

Key features & specs

• Purpose-built for the Gill 65817 pole vault pit
• Precise fit protects against UV rays, rain, and windblown debris
• Holds up through multiple seasons without tearing or losing effectiveness
• Model-specific manufacturing ensures a secure, exact fit
• A smart, low-cost way to extend the life of an expensive pit

Maintenance tip: cover the pit between sessions, not just seasonally, to protect the foam from daily UV exposure. Clear debris and standing water before removing the cover, let both pieces dry before storage, and check the tie-downs each season so it stays secure in high wind.

The Gill Weather Cover for the 65417 Pole Vault Pit fits the 65417 model precisely, shielding the landing foam from the UV rays, rain, and debris that do the most damage between competitions and through the off-season. Pole vault pits are among the most expensive pieces of equipment in a track program, which makes a fitted cover one of the highest-return maintenance items you can buy.

Key features & specs

• Model-matched to the Gill 65417 pole vault pit for a precise fit
• Blocks UV degradation and moisture that break down foam
• Secure coverage that resists wind blow-off and water pooling
• Durable material engineered for multiple outdoor seasons
• Purpose-built alternative to universal tarps that leave gaps

Maintenance tip: keep the pit covered any time it's idle to slow everyday UV aging of the foam. Sweep off debris and drain standing water before removing the cover, dry both pieces before storage, and inspect the fasteners each season so the cover stays put on windy days.

The Gill Weather Cover for the 653 Pole Vault Pit is the purpose-built cover for the Gill Essentials Pole Vault Pit, protecting one of the largest equipment investments in your track program from the elements. Pole vault pit foam is highly susceptible to UV rays, rain, and debris, and a fitted cover is the simplest, most cost-effective way to keep the landing system performing season after season.

Key features & specs

• Sized specifically for the Gill Essentials Pole Vault Pit (19'9" x 20'2" x 26")
• Shields foam landing units from UV exposure, rain, and debris
• Model-matched fit stays secure and resists pooling and blow-off
• Weather-resistant material built for repeated outdoor seasons
• Available in Royal Blue only to match the Essentials pit

Maintenance tip: cover the pit whenever it isn't in active use, not just over the off-season, to get the most foam-saving benefit. Let the pit and cover dry before storing them together, clear off debris and standing water regularly, and check the seams and tie-downs so the cover stays anchored in wind.

The Gill Essentials Pole Vault Pit gives programs a fully high-school-compliant landing system at an economical price, including the recommended preferred landing zone that keeps vaulters safe at the point they need it most. In place of a traditional top pad, the Essentials system uses a skirted mesh top that draws the units together for a snug, stable fit, with a hook-and-loop box cut-out fastener to secure the area around the plant box.

Key features & specs

• Overall size: 19'9" x 20'2" x 26" (6.02m x 6.15m x 0.66m)
• Three base units (6'7" x 12'9" x 26") plus two front slant units (8'3" x 7'5" x 26")
• Skirted mesh top holds units together — no separate top pad required
• Hook-and-loop box cut-out fastener secures the plant-box area
• Meets all high school specifications, including the preferred landing zone
• Royal Blue only; backed by a five-year warranty

Coach's tip: pair the pit with the matching Gill weather cover and a compliant box collar for a complete, safe vault area. Keep the foam dry, spot-clean the vinyl and mesh with mild soap and water, and store covered to protect the units through the seasons.

The Gill AGX M4 High Jump Pit is the premium tier of Gill's high jump landing systems, built for flagship programs that compete at the highest level. Measuring an expansive 27'-2" x 13'-2" x 28", the M4 exceeds NFHS and NCAA minimums to deliver elite-level coverage, while AGX Countervail construction reduces vibration for consistent, cushioned landings across the entire pit surface.

Key features & specs

• Overall size: 27'-2" x 13'-2" x 28" — oversized for maximum coverage
• AGX Countervail construction reduces vibration for consistent landings
• Durable vinyl cover with a top-pad (TP) surface
• Exceeds NFHS and NCAA high jump safety minimums
• Built for high-caliber competition and flagship track venues

Coach's tip: protect this premium investment with the matching Gill weather cover any time the pit is idle. Clean the vinyl with mild soap and water, keep the landing surface dry to preserve the foam, and store the pit covered or indoors through the off-season to protect the AGX Countervail core for years of elite performance.