Track Meet Management Equipment

Hosting throwing events or marking courses on a turf infield used to mean you couldn't use traditional "stick-in-the-ground" pennant holders. The Gill Turf Chute Post solves that. Its weighted 12 lb base holds a streamer of pennants securely on any turf or hard surface without penetrating the field — keeping participants safely outside active throwing sectors and clearly marking boundaries at in-stadium events and indoor facilities.

Key features & specs:

• Non-invasive design sits on top of turf — no ground penetration required
• Heavy 12 lb base stands up to strong winds
• Holds a streamer of pennants to define safety boundaries around throwing events
• Ideal for turf infields, in-stadium throwing setups, and indoor facilities
• Protects both athletes and expensive turf surfaces

A smart safety upgrade for meet directors and coaches running throws on turf or indoors. Position posts to clearly ring the hazard zone before competition, keep the bases clean, and store the posts together between events so your safety perimeter is quick to set up every time.

Give your cross country finish a clean, professional boundary with Gill Chute Rope and Pennants. Each 110-foot length of rope comes strung with assorted-color pennants that make the finish chute and course edges highly visible to runners at speed — helping channel athletes into an orderly single-file finish and keeping your race organized from the first meet of the season on.

Key features & specs:

• 110' length of chute rope per unit
• Strung with assorted-color pennants for high visibility
• Defines finish chutes, start areas, and course boundaries
• Pairs with Gill 4' chute posts (961) and the Gill Cross Country Kit (960)
• Add multiple lengths to build longer chutes for large invitationals

A low-cost essential for cross country meet directors marking a course each season. String the rope taut between chute posts for a crisp boundary, and after the meet coil it loosely with the pennants attached and store it dry to prevent tangles and keep the pennant colors bright for years of use.

The Gill 4' Chute Post is the building block of a well-organized cross country finish chute. Standing four feet tall, each post anchors the pennant rope that channels runners into a single-file finish lane — keeping the finish orderly, protecting timing and place-judging, and giving your meet a clean, professional look. At just $18 per post, it's an affordable way to build out or expand your course-marking system.

Key features & specs:

• Stands 4' tall — a standard height for cross country finish chutes and course boundaries
• Serves as the mounting post for chute rope and pennants
• Works as an add-on or replacement for the Gill Cross Country Kit (960) system
• Pairs with Gill chute rope and pennants (962) to define finish lanes and course edges

Ideal for cross country meet directors building or expanding a finish chute for larger invitationals. Push posts firmly into the ground for stability on race day, and store them together, clean and dry, between meets so your chute system is ready for the next event.

The Gill 960 Cross Country Kit gives meet directors and coaches a trusted, professional-grade course marking system that sets up efficiently and communicates clearly to competitors on race day. The color-coded directional flag system removes any ambiguity about course turns and direction, while the pennant rope and chute posts create defined finish and transition zones that manage athlete flow from start to finish line.

• 24 Chute Posts — Heavy-duty chute posts create the structural backbone of the finish chute and course boundary sections, providing stable, upright markers that define athlete flow and hold chute ropes securely in position through the full duration of the meet regardless of field conditions or wind
• Two 110' Lengths of Chute Rope with Pennants — Two full 110-foot pennant ropes with multi-colored pennants provide 220 feet of visible, highly visible boundary rope for building finish chutes, start areas, and course boundaries — pennants add high-contrast visual definition that helps runners identify course edges quickly during the race
• 9 Color-Coded Directional Flags — Nine directional flags in three purpose-specific colors communicate course direction clearly to competitors: 3 red flags signal left turns, 3 yellow flags signal right turns, and 3 blue flags signal straight ahead — a universally understood color system that reduces the risk of runners missing course direction changes during fast-paced racing conditions
• 9 Directional Posts — Nine matching directional posts accompany the flags, providing stable, ground-mounted supports that keep directional flags upright and properly positioned at key course decision points throughout the race route regardless of terrain or wind conditions
• Complete Single-Purchase Solution — All components needed for a professionally marked cross country course arrive together in one kit, eliminating the time and cost of sourcing chute posts, directional flags, and pennant ropes separately — ready to deploy for the first meet of the season right out of the package
• Compatible with Additional Gill Cross Country Accessories — Kit components integrate with Gill's full cross country product line including additional chute posts (961), replacement chute rope and pennants, and the Gill finish line banner (sold separately), allowing meet directors to expand course marking capacity for larger invitationals as needed

Certifying hammers at check-in has always meant kneeling on the ground with a vertical gauge — the Gill Hammer Length Gauge ends that. Its horizontal design lets officials measure hammer length at a comfortable working height, speeding up weigh-in and taking the strain off backs and knees during long meets. Every hammer gets verified quickly and accurately, so your competition stays on schedule and on spec.

Key features & specs:

• Aluminum gauge constructed horizontally for ergonomic use — no bending to the ground
• Toggle Clamp pulls and straightens the wire to capture true overall length
• Hammer Read-Out Tool precisely captures the measured length
• 3-piece unit breaks down for convenient transport and storage
• Built for repeated use at the certification table throughout a meet

A must-have for meet officials and throws coaches certifying hammers at sanctioned competitions. Store the three sections together in your certification kit, keep the clamp and read-out mechanism clean and free of grit, and check calibration at the start of each season so your measurements stay reliable.

Running a compliant indoor throws competition means every implement has to be verified before it flies, and the Gill NCAA Indoor Implement Certification Kit puts everything officials need to do that job in one self-contained package. With laser-cut gauges and a built-in scale, your certification table can confirm that each indoor shot and weight throw implement meets NCAA specifications — giving officials, coaches, and athletes confidence that the competition is fair.

Key features & specs:

• Self-contained kit includes an integrated scale for on-site weigh-ins
• Labeled tabs help officials quickly locate the correct gauge for each implement
• Horizontally designed, ergonomic weight/hammer gauge for easy handling
• Gauges and labels are laser-cut for extreme accuracy and lasting permanency
• Includes: 93020 20K Scale, 93021 Scale Ring, 93030 4K Shot Gauge, 93032 16 lb. Shot Gauge, 93035 Indoor Throwing Weight Length Gauge, and 93036 Indoor Shot Max Gauge

An essential investment for any collegiate or high-level indoor program hosting sanctioned meets. Keep the kit stored together indoors, clean and dry, and recheck gauge calibration at the start of each season so your certifications stay reliable meet after meet.

Indoor weight throw implements have to fall within strict length limits, and the Gill Indoor Throwing Weight Gauge lets officials and coaches verify that dimension quickly and confidently at check-in. Instead of eyeballing a suspect implement or holding up the event, you get a purpose-built gauge that confirms the overall length of each indoor weight meets specification in seconds.

Key features & specs:

• Purpose-designed to check the overall length of indoor weight throw implements
• Adjustable knob for quick calibration before each use, ensuring consistent, accurate readings
• Built for repeated use at the certification table throughout a meet
• Pairs with Gill scales and gauges as part of a complete indoor certification setup

For meet directors and throws officials running indoor competitions, this gauge is a key part of keeping weigh-ins fair, fast, and compliant. Recalibrate with the adjustable knob at the start of each session, and store the gauge indoors in your certification kit, clean and dry, to preserve its accuracy season after season.

Weighing round throwing implements on a flat scale platform is a balancing act — literally. The Gill Scale Ring (3D Printed) solves that problem with a simple, precision-made ring that cradles shots and weights on the scale so they sit still while officials record the reading. No more chasing a rolling shot put across the check-in table or second-guessing an unsteady weigh-in.

Key features & specs:

• Purpose-built ring keeps round implements steady and centered on the scale during weigh-in
• 3D-printed for a consistent, repeatable fit
• Lightweight and easy to place on or remove from the scale platform
• Pairs with Gill implement scales for faster, more reliable certification

A small but valuable accessory for meet officials and throws coaches who want quick, accurate weigh-ins without fumbling with unstable implements. Store it with your certification kit so it's always on hand at check-in, and wipe it clean of chalk and grit to keep implements seating flush on the ring.

Accurate weigh-ins are non-negotiable at a sanctioned meet, and the Gill Essentials Implement Scale gives officials a compact, dependable digital scale for certifying shots, discs, hammers, and weights on site. Its clear digital readout and multiple weighing modes make check-in fast and precise, so your event stays on schedule and every implement meets specification.

Key features & specs:

• 86 lb / 39 kg weighing capacity
• Five weighing modes: grams, ounces, kilograms, pounds, and pounds-and-ounces
• 8" x 6 1/4" weighing platform; overall scale dimensions 9 1/2" x 8" x 1 1/4"
• Digital auto calibration, tare function, auto-hold switch, auto turn-off, flip holder, and backlit screen
• Runs on 2 AA batteries (included) or 5V DC adapter
• Includes digital scale, 2 AA batteries, AC adapter, and user manual

An essential tool for meet officials and throws coaches who need to verify implement weights quickly and confidently. Keep the platform clean and free of grit, store indoors away from moisture, and remove the batteries during long off-season storage to protect the electronics.

The Gill Custom Graphic for an LJ/TJ Sand Pit Cover adds an optional 5' x 5' multi-color graphic, your school logo, mascot, or name, on a white background to a long jump or triple jump sand pit cover. It turns a practical piece of facility equipment into a branded showpiece that displays school pride across the infield during home meets, while the cover continues to protect the sand pit from weather and debris. This graphic is made to pair with the Gill 730147 and 730147V standard and mesh sand pit covers.

Key features & specs:

• Optional 5' x 5' multi-color graphic on a white background
• Add a logo, mascot, or school name to your sand pit cover
• Made for the Gill 730147 and 730147V sand pit covers
• Customer must provide vector artwork and a completed order form
• Approximately 20-day production lead time after artwork approval

Coach's tip: Provide high-resolution vector artwork in your official colors and submit the graphic worksheet early, since production runs about 20 days after final approval. Confirm you have a compatible 730147 or 730147V cover before ordering so the graphic fits correctly.

The Gill 2-Digit Pole Vault Display shows the current standard setting to vaulters, coaches, and spectators so everyone tracks the bar height as the competition climbs. Standing 5' 8" tall with two large 9" numerals on a 360-degree rotating head, it stays readable from anywhere around the runway, and a wheeled steel base makes it easy to position beside the pit and roll away when the event is done.

Key features & specs:

• Two large 9" numerals for a clear standard-setting readout
• Stands 5' 8" tall with a 360-degree rotating display
• Aluminum frame and upright with gloss-black powder-coat finish
• 18" square powder-coated steel base with tip-and-roll wheels
• Purpose-built for pole vault competition

Coach's tip: Place the display where vaulters and judges can see the current height at a glance, and rotate the head toward the crowd during finals. Roll it to a dry indoor space between meets to protect the numerals and the powder-coat finish for years of reliable use.

The Gill 2-Digit Lap Counter with Bell keeps distance races on track by clearly showing runners and spectators the laps remaining, with a large bell to signal the final lap, a time-honored track tradition. Standing 5' 8" tall with two large 9" numerals on a 360-degree rotating head, it stays visible across the infield, and a wheeled steel base makes it easy to roll into position on the home straight.

Key features & specs:

• Two large 9" numerals for clear lap counts
• Large bell included to signal the final lap
• Stands 5' 8" tall with a 360-degree rotating display
• Aluminum frame and upright with gloss-black powder-coat finish
• 18" square steel base with tip-and-roll wheels

Coach's tip: Position the counter on the home straight where runners pass it every lap, and assign an official to update it and ring the bell as the leader starts the final lap. Roll it to indoor storage between meets to protect the numerals and finish.

The Gill 5-Digit Performance Indicator is a National-level display board that keeps athletes and spectators informed of marks and results during meets. Standing 5' 8" tall with five large 9" numerals on a 360-degree rotating head, it stays readable from anywhere in the facility. The aluminum frame with powder-coat finish and a wheeled steel base make it both durable and easy to move into position for each event.

Key features & specs:

• Five large 9" numerals (three black, two red)
• Stands 5' 8" tall with a 360-degree rotating display
• Aluminum frame and upright with powder-coat finish
• 22" square base (45 lbs) with tip-and-roll wheels
• Gloss-black finish for clear, high-visibility readouts

Coach's tip: Place the indicator where both competitors and spectators can read it, and rotate the head toward the crowd during marquee events. Roll it to a dry indoor space between meets to protect the numerals and the powder-coat finish for years of use.

The Gill 4-Digit Performance Indicator displays marks, distances, and heights to athletes and spectators across the infield during track and field meets. Standing 5' 8" tall with four large 9" numerals and a 360-degree rotating display, it keeps everyone informed no matter where they're seated. A tip-and-roll steel base makes it easy to reposition, and the aluminum frame with powder-coat finish holds up to season-after-season use.

Key features & specs:

• Four large 9" numerals (two black, two red)
• Stands 5' 8" tall with a 360-degree rotating display
• Aluminum frame and upright with powder-coat finish
• 18" square powder-coated steel base with tip-and-roll wheels
• Gloss-black finish for clean, high-visibility readouts

Coach's tip: Position the indicator where both the competition area and the stands can see it, and rotate the display toward the crowd during finals. Roll it away to indoor storage between meets to protect the numerals and powder-coat finish. Because the head rotates a full 360 degrees, one unit serves both the competition area and the stands during finals.

The Gill 45W Megaphone with Input Jack gives coaches, officials, and meet directors the projection to command attention across a busy track, field, or gym. With 45 watts of output and a range of up to 800 meters, it carries starting instructions, event calls, and announcements clearly over crowd noise, and the auxiliary input jack lets you connect a music source or recorded messages for warm-ups and ceremonies.

Key features & specs:

• 45-watt output with a range of up to 800 meters
• Input jack for connecting external audio sources
• Powered by 10 "D" batteries for about 17 hours of use
• Batteries not included
• Ideal for meets, practices, and large-venue announcements

Coach's tip: Keep a spare set of "D" batteries in your meet kit and remove the batteries during long-term storage to prevent corrosion. Speak in short, clear bursts a few inches from the mic for the best projection across the venue.

The Gill Lap Counter Display Stand transforms the E49872 Electronic 2-Digit Display into a trackside lap counter for distance races, giving runners and spectators a clear, at-a-glance count of laps remaining. The stand raises the display to a readable height along the rail and includes a bell to signal the final lap, a time-honored track tradition that keeps athletes informed and races running on cue. It is the simplest way to add lap-counting capability to a display you already own.

Key features & specs:

• Converts the Gill E49872 Electronic 2-Digit Display into a lap counter
• Includes a bell to signal the final lap
• Elevates the display to a clear, trackside viewing height
• Designed to pair specifically with the E49872 display (sold separately)

Coach's tip: Position the stand on the home straight where runners pass it each lap, and assign an official to ring the bell as the leader begins the final lap. The E49872 display is required and sold separately; store both indoors between meets to protect the electronics.

The Gill Compact Wind Indicator is a safe, economical way to show athletes the relative strength and direction of the wind at the point of use during jumping events. A clear read on the wind helps long jumpers, triple jumpers, and pole vaulters time their approach and adjust their run, while giving coaches a simple visual reference for practice and competition. Its unintrusive, aesthetic design keeps it out of the way while still delivering the information athletes need.

Key features & specs:

• Compact, unintrusive design for jumping-event runways
• Shows relative wind strength and direction at the point of use
• Helps athletes stay safe and optimize their approach
• Economical alternative to electronic wind gauges for daily training
• Clean, aesthetic look suited to any facility

Coach's tip: Mount the indicator where jumpers can glance at it during their approach without breaking rhythm. Note that this is a visual training aid, not a certified wind gauge, so use an official anemometer for record-eligible marks. Store it indoors in the off-season to extend its life.

The Gill International Finish Posts mark the finish line clearly and professionally for track meets, cross country events, and time trials. Built from heavy-duty steel with big, bold lettering, these posts make the finish unmistakable to athletes, officials, and timers from a distance. Wheeled, folded square bases let a single person roll them into position and lock them in place, so setup and teardown between events is quick and painless. Sold in pairs for a complete finish line.

Key features & specs:

• Heavy-duty steel construction for stability and long service life
• Folded square bases for a solid, tip-resistant footprint
• Wheeled bases for easy one-person mobility
• Big, bold "FINISH" lettering for clear visibility across the track
• Sold in pairs to flank both sides of the finish line

Coach's tip: Position the posts squarely on the finish line and align them with your timing equipment for accurate reads. Store them indoors or under cover between meets to protect the finish and keep the lettering crisp.

The Ultrak Timer Paper is the consumable that keeps your Ultrak printing timer producing results all meet long. Sold as a box of three rolls, it's designed for Ultrak's line of electronic timing and printing systems used at track and field events — keep a supply on the timing table and printed results never have to stop mid-meet.

Key features & specs:

• Quantity: Box of 3 rolls
• Use: For Ultrak electronic timing and printing systems
• Function: Keeps printed meet results running without interruption
• Best for: Meet managers and timing tables running Ultrak equipment
• Model: UT-0100236

Coach's tip: Confirm the paper matches your specific Ultrak timer model before ordering, since different units take different rolls. Keep at least one spare box in the timing kit for big meets, and store rolls in a cool, dry place so the thermal coating stays crisp and prints clearly.

The Ultrak Timer Additional Button is an add-on lane push-button for the Ultrak L20 lane timer, letting meet crews expand their setup to capture splits and finishes on more lanes. Each button connects to the timer through Ultrak's linkgate system, so you can add capacity without a tangle of separate cords running back to the timing table.

Key features & specs:

• Type: Additional lane push-button for the Ultrak L20 lane timer
• Connection: Links to the timer via the linkgate system (no tangled cords)
• Function: Records lap/split and finish inputs for an added lane
• Compatibility: For use with the Ultrak L20 8-lane timing system
• Model: UT-GP-37934

Coach's tip: Label each lane button clearly and test the linkgate connection during setup so every lane registers before the first race. Keep a spare button in the timing kit — a single dead button can leave a lane untimed, and swapping one in is far easier than reconfiguring mid-meet.

• Times races with up to 10 lanes
• Times road races with up to 8,000 participants
• 8,000 multiple event memory
• Prints bib number, lane, place, and time
• Time and calendar
• Includes linkgate eliminating tangled cords to timer
• Compatible with Hytek, RunScore and Easy Meet Manager
• Includes Windows interface
• Includes 8 lane buttons and 2 rolls of paper
• 2 Year warranty

Road Race (Cross Country) Mode

• 8,000 memory for individual finishers in single or multiple events
• Store multiple events in memory for later review or printing
• Four digit bib numbers
• Bib number entry at finish or add/edit after event
• Four digit place counter
• Automatic print out during event
• Final result print out after event
• Single and multiple start times
• Up to 10 waves in multiple start race

Track Race Mode

• Up to 10 lap/split lane buttons
• Linkgate allows single wire to lane timer, eliminating tangled wires
• 8,000 dual split memory for single or multiple events
• Store multiple events in memory for later review or printing
• Four digit place counter
• Pre-entry of bib and lane numbers
• Bib number add/edit after event
• Two digit lap counter
• Test mode for verification of lane set-up

Built-In Printer

• Prints 20 digits, 1 lap/split record per line
• Printing speed of 1 line per second
• Automatic printout of date, run number and record type (track, road or multiple)
• Pause printing function allows for paper change
• Powered by rechargeable internal battery; recharged by USB

The Ultrak S950 Thermal Paper keeps your Seiko S149 printing stopwatch stocked and ready for meet day. Sold five rolls to a box, it's the correct consumable for the S149's built-in thermal printer — having a fresh supply on hand means results keep printing without interruption during a busy day of events.

Key features & specs:

• Type: S950 thermal paper for the Seiko S149 stopwatch/printer
• Quantity: 5 rolls per box
• Roll length: Each roll is 80 inches long
• Capacity: Prints approximately 520 lines per roll
• Model: SK-UT-GP-37805

Coach's tip: Confirm you're ordering S950 paper for the S149 (Ultrak L10/L20 timers use different rolls) so it fits your printer. Keep a spare box in the meet kit, load a fresh roll before big events, and store paper in a cool, dry place — heat and humidity can prematurely darken thermal paper.

The Gill Seiko S149 Stopwatch with Printer is a serious meet-management tool that captures and prints timing results on the spot. With 300 dual-split memory and an integrated thermal printer, it lets officials record multiple events and produce a printed record instantly — the reliable choice for track programs that need documented, defensible results at every meet.

Key features & specs:

• Memory: 300 dual-split memory; saves multiple events
• Display: Large-size 3-line display with auto-start function
• Printer: Prints 13 digits per line at 1.5 lines per second; battery-life indicator
• Included: 2 rolls of paper
• Warranty/Model: 3-year warranty; SK-GP-37801

Coach's tip: Keep spare thermal paper rolls in your meet kit so you never run out mid-event, and print a final results tape after each event for your records. Store the unit dry with the printer cover closed to protect the mechanism between meets.

The Gill Robic SC-505W Stopwatch Set of 6 equips a full coaching staff with reliable, easy-to-read timing tools for track, swimming, and multi-event practice management. Each SC-505W features a large display and precise timing functions for recording splits, intervals, and finish times — and buying a set of six means every coach on the sideline has a dedicated watch, streamlining large-group workouts and meet days.

Key features & specs:

• Set: Six Robic SC-505W stopwatches
• Display: Large, easy-to-read readout
• Timing: Records splits, intervals, and finish times
• Best for: High school and youth track and swimming programs
• Model: GP-0100231

Coach's tip: Assign and label a watch per coach so timing responsibilities are clear on meet day, and set everyone to the same mode before an event for consistent splits. Store the set together with fresh batteries on hand so no watch dies mid-workout.

The Porter Gill Weighted Football Pylons are the ideal way to mark the end zone and goal lines on any field. This set of four bottom-weighted markers stands up on its own with no hardware or anchoring required, yet gives way safely when an athlete makes contact — combining clear, regulation field marking with player safety in one simple package.

Key features & specs:

• Quantity: Set of 4 pylons
• Design: Bottom-weighted to stand freely; no additional hardware to install
• Safety: Move on contact to reduce injury risk
• Compliance: Meets all NCAA and NFHS rules
• Build/Model: UV-treated fluorescent orange vinyl with extra-strength double-stitched seams; GP-296801

Coach's tip: Place pylons at the corners of the end zone and goal-line intersections per the rulebook for consistent, legal marking. Wipe them down and store them out of prolonged sun between seasons — even UV-treated vinyl lasts longer out of constant exposure.

Unlike traditional starting pistols that require costly blanks, the HALO® device is an electronic system that can connect wirelessly to the Wireless Speaker System and produce both the traditional bang sound and an audible tone. Connect to the Multiple Speaker System to disperse sound above the decibel standard equally across the starting line. Halo Electronic Starter Device: Unique ring design reduces the concern of guns on school campuses 12 total LED lights that wrap around both sides of the device so that the hand-timers can see the flash clearly from afar Sounds either a tone or bang sound when used with the Wireless Speaker System. Tested to meet the >90db requirement to start a track meet when used with this speaker system Features an audio jack for compatibility with existing speaker systems that have an aux input. However, please note that if used with another speaker system, it is not guarnateed to meet the >90db requirement Batteries are a less expensive solution compared to blanks Wireless option available to eliminate cable cord stretching around the track to the official Compatible with FinishLynx® and Eagle Eye timing systems Powered by one 9V battery, included Includes: Halo Device, Protective Soft Carrying Case, Audio Cable, Timing System Cable, 9V Battery, Phillips Head Screwdriver Wireless Speaker System: The Wireless Speaker System is the perfect companion to the HALO® Starting Device. Multiple Speaker System disperses sound above the decibel standard equally across the starting line. Connects wirelessly with the HALO® Electronic Starting Device via a RF technology 50 Watt Speaker (+90dB) Powered by a rechargable 12v Battery Compatible with FinishLynx® and Eagle Eye timing systems Includes: Wireless Speaker System, Protective Carrying Case, Rain Cover, 12v Battery, Battery Charging Cable, durable wide based Tripod. Does not include the HALO Starting Device. WIRELESS STARTER SYSTEM VALUE PACK; COMPETITION PACK includes: 1 HALO and 2 Wireless Speaker Systems

Unlike traditional starting pistols that require costly blanks, the HALO® device is an electronic system that can connect wirelessly to the Wireless Speaker System and produce both the traditional bang sound and an audible tone. Connect to the Multiple Speaker System to disperse sound above the decibel standard equally across the starting line. HALO ELECTRONIC STARTER DEVICE: Unique ring design reduces the concern of guns on school campuses 12 total LED lights that wrap around both sides of the device so that the hand-timers can see the flash clearly from afar Sounds either a tone or bang sound when used with the Wireless Speaker System. Tested to meet the >90db requirement to start a track meet when used with this speaker system Features an audio jack for compatibility with existing speaker systems that have an aux input. However, please note that if used with another speaker system, it is not guarnateed to meet the >90db requirement Batteries are a less expensive solution compared to blanks Wireless option available to eliminate cable cord stretching around the track to the official Compatible with FinishLynx® and Eagle Eye timing systems Powered by one 9V battery, included Includes: Halo Device, Protective Soft Carrying Case, Audio Cable, Timing System Cable, 9V Battery, Phillips Head Screwdriver WIRELESS SPEAKER SYSTEM: The Wireless Speaker System is the perfect companion to the HALO® Starting Device. Multiple Speaker System disperses sound above the decibel standard equally across the starting line. Connects wirelessly with the HALO® Electronic Starting Device via a RF technology 50 Watt Speaker (+90dB) Powered by a rechargable 12v Battery Compatible with FinishLynx®, Eagle Eye and Fast Timing systems Includes: Wireless Speaker System, Protective Carrying Case, Rain Cover, 12v Battery, Battery Charging Cable, durable wide based Tripod. Does not include the HALO Starting Device. WIRELESS STARTER SYSTEM VALUE PACK includes: 1 HALO and 1 Wireless Speaker System

The Gill Cone Marker is a rugged, all-purpose marker that earns its keep at the track, on the field, and in the gym. Coaches use it to mark relay exchange zones and cut-in positions on the track, set up agility and drill stations, and lay out boundaries for practice — a simple, low-cost tool that brings structure and safety to any training session.

Key features & specs:

• Size: 6" cone height
• Color: High-visibility orange with black base
• Material: Durable, flexible PVC that bounces back after being stepped on
• Uses: Relay exchange zones, cut-in positions, agility drills, and field/gym markings
• Model: Gill TA9756

Coach's tip: Buy cones in quantity and keep a set in a mesh bag so a full drill layout is always ready to go. The flexible PVC shrugs off being stepped on — just stack and store them out of prolonged direct sun to keep the material from getting brittle over time.