Long & Triple Jump Equipment

The Gill Pit Rake keeps long jump and triple jump landing pits smooth, level, and competition-ready. Constructed from strong, durable aluminum with a wide 36" head, it lets the runway crew groom a large area of sand in just a few passes — essential for consistent, safe landings and accurate measurement between every jump.

Key features & specs:

• Head width: 36" wide for fast, efficient pit grooming
• Construction: Strong, durable aluminum
• Use: Leveling and smoothing long jump/triple jump sand pits
• Benefit: Covers a large area quickly for consistent, safe landing surfaces
• Model: GP-451

Coach's tip: Rake the pit level and flush with the runway before every flight so jumps land and measure fairly, and pull loose sand back from the edges to keep the pit full. Rinse the aluminum head after wet meets and store it with your shovel and broom as a complete pit-maintenance kit.

The Gill Pit Shovel is a rugged, purpose-built tool for maintaining long jump and triple jump landing pits. Its tempered steel blade cuts easily through packed sand to level, turn, and redistribute the pit between jumps and after practice, while the reinforced fiberglass handle stands up to daily use without the splintering or bending of cheaper tools.

Key features & specs:

• Blade: Tempered steel for durability and easy digging in packed sand
• Handle: Reinforced fiberglass for strength and long life
• Use: Leveling and maintaining long jump/triple jump sand pits
• Best for: Track and field programs maintaining jump runways
• Model: GP-450

Coach's tip: Keep a shovel, rake, and broom together as a pit-maintenance kit so the runway crew can reset the pit quickly between flights. Rinse sand off the blade after use and store the tool indoors so the steel stays clean and the handle lasts for years.

This composite take-off board and base board combination is designed specifically for the Gill 444 System, giving facilities a reliable, low-maintenance upgrade over traditional wood boards. The Polyboard composite surface resists the warping, splitting, and cracking that shortens the life of wooden boards, making it a practical long-term investment for high school and college programs.

• • Polyboard Composite Surface – Environmentally friendly, waterproof composite material that will not warp, split, or crack under repeated impact and outdoor conditions, offering significantly longer lifespan than wood
  • Reversible Board Design – Take-off board can be flipped to extend usable life, reducing replacement frequency and overall maintenance costs for track facilities
  • Adjustable Aluminum Base Board – Allows precise horizontal and vertical leveling to achieve a flush, competition-legal fit within the installation tray without requiring full board removal during adjustments
  • NFHS and NCAA Certified – Meets governing body specifications for high school and collegiate long jump and triple jump competition, making it suitable for sanctioned meets at both levels
  • Superior Grip Surface – Textured composite top provides consistent, reliable traction at the take-off point, supporting confident jumps and reducing the risk of slipping during competition

This board is the standalone composite replacement for facilities that already have the Gill 444 System installed and need to swap out a worn or damaged take-off board without replacing the full system. The Polyboard composite surface maintains consistent grip and structural integrity through heavy seasonal use, eliminating the warping and cracking issues common with wood boards.

• • 444 System Compatible – Designed specifically as a direct replacement for Gill 444 Take-Off Board System installations, fitting precisely without modification or additional hardware
  • 8" Wide Polyboard Composite Surface – Waterproof, environmentally friendly composite material resists splitting, cracking, and warping across all weather conditions and heavy use cycles
  • Superior Grip for Jumpers – Textured composite surface provides reliable traction at the take-off point, supporting confident, consistent launches in both training and competition
  • Longer Lifespan Than Wood – Composite construction holds up far longer than traditional plywood boards, reducing how often facilities need to order replacements and cutting long-term maintenance costs
  • College Competition Ready – Meets NCAA specifications for sanctioned long jump and triple jump events at the collegiate level

The College Take-Off Board Installation Tray serves as the foundation of a properly built long jump or triple jump runway setup. Constructed from 3/16" formed and welded aluminum, it is embedded directly into the runway surface and holds the take-off and foul boards flush with the surrounding track, creating a safe and competition-legal jumping zone.

• • Heavy-Duty Welded Aluminum Construction – Formed from 3/16" thick aluminum and fully welded for structural rigidity, ensuring the tray remains stable and level through years of permanent installation and heavy athlete use
  • Flush Runway Integration – Engineered to sit level with the surrounding track surface, eliminating raised edges or gaps that could affect athlete safety or take-off mechanics during competition
  • Replacement-Friendly Design – Protects the take-off area and allows straightforward swapping of take-off and foul boards without disturbing the tray or runway structure, reducing facility downtime during changeovers
  • Multi-Standard Compliant – Meets High School (NFHS), NCAA, and IAAF specifications, making it a suitable permanent installation for facilities that host events across multiple competition levels
  • Compatible with Gill 444 System – Designed to work with Gill's college take-off board components, including composite and wood board options, providing a complete and cohesive runway system

The Gill High School Take-Off Board Installation Tray is the recessed foundation that holds a take-off board flush and stable within the runway surface — critical for both athlete safety and competition compliance. Designed for the Gill 441TS system, it ensures the board sits at exactly the correct height and alignment, simplifying installation and reducing the need for custom concrete work.

Key features & specs:

• Function: Recessed mounting tray that holds the take-off board flush in the runway
• Compatibility: Designed for the Gill 441TS system
• Benefit: Keeps the board at the correct height and alignment for legal, safe jumps
• Installation: Simplifies setup and minimizes custom concrete work
• Model: GP-442

Coach's tip: Set the tray perfectly level and flush with the runway during installation — a legal, safe take-off depends on it. Pair it with the matching 441TS board assembly, and keep the tray clear of sand and debris so boards seat cleanly during changeovers.

Gill Plasticine is the foul-detection medium that makes World Athletics take-off board systems work. Pressed into the foul-indicator board, this soft modeling clay captures a clean imprint of any foot that crosses the foul line, giving officials an unmistakable, accurate read on close jumps. Sold in 1 lb yellow bricks that never harden, it's a must-stock consumable for any facility running foul-board systems.

Key features & specs:

• Use: Foul detection for World Athletics take-off board systems
• Weight/Color: Sold in 1 lb yellow bricks
• Property: Stays pliable — never hardens
• Function: Captures a clear foot imprint to mark fouls at the take-off line
• Model: GP-439

Coach's tip: Smooth a fresh layer into the foul board and angle it per the rules before competition so imprints read cleanly, and re-smooth between flights as needed. Keep a spare brick in the field-event kit, and store plasticine at moderate temperature so it stays easy to work.

The Gill 12" Take-Off Board Assembly is built from durable composite material to give long jump and triple jump programs a weather-resistant, competition-legal take-off surface at the high school and collegiate level. At 12 inches wide, it meets standard interscholastic specifications and delivers the firm, consistent surface athletes need to plant and launch with confidence.

Key features & specs:

• Width: 12" take-off board meeting standard interscholastic specifications
• Construction: Composite material for durability and weather resistance
• Advantage: Longer service life and lower maintenance than traditional wood boards
• Installation: Engineered for a flush, level fit for fair, accurate competition
• Model: GP-435210S

Coach's tip: Install the board flush with the runway surface using the matching Gill tray so there's no lip to affect a jumper's plant. Wipe the composite clean of grit for reliable traction, and check the leveling each preseason to keep competition conditions fair.

This complete system is engineered specifically for facilities hosting World Athletics certified events, delivering the precision, compliance, and durability required at the highest level of track and field competition. The package arrives ready to install with every component included, eliminating the need to source parts separately and ensuring full regulation conformance from the start.

• World Athletics Certified – Fully compliant with World Athletics (IAAF) specifications for long jump and triple jump, making it suitable for international meets, elite invitationals, and any competition governed by World Athletics technical rules
• Complete System Package – Includes installation tray, adjustable folded aluminum base, reversible take-off board, foul board, and blanking lid — everything required for a competition-ready runway setup in a single purchase
• Exclusive Easy-Adjust Leveling System – Allows precise horizontal and vertical alignment using leveling bolts with only the foul board removed, keeping setup fast and efficient without disturbing the take-off board during adjustments
• Composite Polyboard Surface – Waterproof, environmentally friendly Polyboard composite resists warping, splitting, and cracking through heavy seasonal use, offering consistent grip and a significantly longer lifespan than wood boards
• Reversible Board Design – Take-off board flips to extend usable life and reduce replacement costs, an important feature for facilities managing high event volumes across a full competitive season

The Gill Take-Off/Foul Board Assembly meets World Athletics specifications and is built from composite material for exceptional durability meet after meet. Designed for long jump and triple jump runways, the assembly pairs the take-off board with a foul indicator so athletes and officials get a compliant, accurate board setup — the reliable choice for facilities hosting sanctioned competition.

Key features & specs:

• Compliance: Meets World Athletics specifications for long jump and triple jump
• Includes: Take-off board plus foul indicator board
• Construction: Composite material that resists warping and weather damage
• Durability: Outlasts traditional wood boards for a smart long-term investment
• Model: GP-435110S

Coach's tip: Pair the assembly with the correct Gill installation tray so it sits flush and legal in the runway, and fill the foul board with fresh plasticine before competition for accurate foul detection. Wipe the composite surface clean and check the leveling at the start of each season for consistent, fair jumps.

This system is the go-to choice for college athletic programs that need a fully NCAA-compliant jumping setup in one package. The included foul board sets this apart from standard take-off board systems, delivering everything officials and athletes need for accurate foul detection and consistent performance during sanctioned collegiate competition.

• NCAA-Compliant 12" System – Pairs an 8" composite take-off board with a 4" NCAA foul board to create a complete 12" regulation system that meets all collegiate long jump and triple jump competition requirements
• Complete Package Included – Comes with installation tray, adjustable folded aluminum base, reversible composite take-off board, NCAA foul board, and blanking lid — no additional components needed for a full runway installation
• Composite Polyboard Surface – Waterproof, environmentally friendly Polyboard material resists warping, splitting, and cracking under heavy use, providing reliable grip and a much longer service life than traditional wood boards
• Exclusive Easy-Adjust Leveling System – Leveling bolts allow both horizontal and vertical adjustment with only the foul board removed, keeping setup fast and precise without taking the take-off board out of position
• Reversible Take-Off Board – Board flips to a fresh surface when one side wears, extending the usable life of the system and reducing long-term replacement costs for facilities running high event volumes