High Jump Equipment

The Gill Water Shed Insert is a simple device that meaningfully extends the life of your high jump and pole vault landing systems. Placed under the weather cover, it prevents water from pooling in the natural low spots that form on a pit's surface, stopping the standing water that stretches covers, seeps into seams, and accelerates foam breakdown. For a small investment, it protects one of the largest equipment expenses in your program.

Key features & specs:

• Prevents water pooling on the weather cover's low spots
• Works with high jump and pole vault landing systems
• Promotes runoff to protect the cover and foam beneath
• Simple to position under any fitted weather cover
• Low-cost way to extend landing-system service life

Coach's tip: Position the insert under the cover at the pit's lowest points so water sheds toward the edges, and check it after heavy rain or snow. Pair it with a properly fitted weather cover for the best protection, and store it with the cover in the off-season.

The Gill High Jump Standard Base Pads add an important layer of safety to the high jump area by cushioning the exposed bases of the standards, where athletes can make incidental contact as they clear the bar and land. Each pad wraps the base in dense foam encased in bright yellow vinyl, both softening impact and clearly marking the standard for jumpers and officials. Sold in pairs so both standards are protected for a complete, compliant setup.

Key features & specs:

• 19" x 19" x 2" thick foam pad for impact protection
• Encased in high-visibility yellow vinyl
• Cushions the exposed high jump standard bases
• Bright color improves visibility for athletes and officials
• Sold in pairs for both standards

Coach's tip: Seat the pads firmly around each standard base and check placement before every session, since bases shift during setup. Wipe them down and store them dry in the off-season to protect the vinyl and keep the foam resilient for years of use.

The Gill Weather Cover for the 66517 Pole Vault Pit is cut to fit the Gill 66517 model precisely, shielding your landing system from sun, rain, and debris during storage between competitions and throughout the off-season. Using a fitted cover is the single most effective way to extend the service life of a pole vault pit, one of the largest line-item equipment costs in any track and field program, so this accessory pays for itself many times over in protected foam and preserved performance.

Key features & specs:

• Model-specific fit engineered for the Gill 66517 pole vault pit
• UV-resistant, weather-resistant material built for multiple outdoor seasons
• Full coverage with no gaps to keep moisture and debris off the landing surface
• Protects foam and top pads from sun damage and pooling water

Coach's tip: Cover the pit whenever it is not in use and brush off standing water or snow before it pools. Let the cover dry fully before folding for storage to prevent mildew and keep the material supple.

The Gill Weather Cover for the 66817 Pole Vault Pit is precision-fitted for the Gill 66817 model, delivering year-round protection from UV exposure, moisture, and airborne debris that degrade foam landing systems over time. For a pit that represents a five-figure investment, a purpose-built cover is a simple maintenance step that pays for itself many times over in extended equipment life and preserved landing performance.

Key features & specs:

• Built to exact 66817 specifications for complete, gap-free coverage
• Heavy-duty, weather-resistant material engineered for many outdoor seasons
• UV protection guards top pads and foam against sun damage
• Keeps rain, snow, and debris off the landing surface between meets

Coach's tip: Keep the pit covered whenever it is idle and clear standing water or snow before it pools in low spots. A water-shed insert underneath helps runoff, and drying the cover before folding prevents mildew and keeps the material flexible season after season.

The Gill Weather Cover for the 66317 Pole Vault Pit provides a model-matched fit for the 66317 pit, protecting the foam landing system from the elements that cause the most damage: UV radiation, rain saturation, and windblown debris. A properly stored pit retains its cushioning and structural integrity far longer than one left exposed, making this cover an essential part of any facility's maintenance plan.

Key features & specs

• Model-matched to the Gill 66317 pole vault pit
• Shields foam from UV rays, rain, and windblown debris
• Weather-resistant material endures outdoor conditions without cracking or tearing
• Purpose-built to pair seamlessly with the 66317 model
• Protects the cushioning properties that keep vaulters safe

Maintenance tip: keep the pit covered any time it isn't in use to preserve the foam's cushioning. Clear debris and standing water before removing the cover, let both pieces dry before storing, and check the seams and tie-downs each season so it stays anchored on windy days.

The Gill Weather Cover for the 66217 Pole Vault Pit is model-matched to the 66217 pit precisely, delivering reliable protection from the UV degradation, moisture, and debris that break down foam landing systems over time. Keeping a proper cover on the pit whenever it's idle is one of the most important maintenance steps for extending the service life of a costly piece of equipment.

Key features & specs

• Model-matched to the Gill 66217 pole vault pit
• Protects against UV rays, moisture, and windblown debris
• Durable, weather-resistant material for multiple seasons of storage
• Purpose-built fit eliminates the gaps of improvised tarps
• A low-cost way to protect a major facility investment

Maintenance tip: cover the pit between practices and meets, not just over winter, to slow everyday foam aging. Brush off debris and drain water before removing it, dry both pit and cover before storage, and inspect the fasteners each season so the cover holds in wind.

The Gill Weather Cover for the 65817 Pole Vault Pit is purpose-built for the 65817 model, giving programs a precise, gap-free fit that protects the landing system from sun, rain, and debris whenever the pit is out of use. Because a pole vault pit is a long-term facility investment, proper storage under a fitted cover dramatically reduces the foam degradation caused by outdoor exposure.

Key features & specs

• Purpose-built for the Gill 65817 pole vault pit
• Precise fit protects against UV rays, rain, and windblown debris
• Holds up through multiple seasons without tearing or losing effectiveness
• Model-specific manufacturing ensures a secure, exact fit
• A smart, low-cost way to extend the life of an expensive pit

Maintenance tip: cover the pit between sessions, not just seasonally, to protect the foam from daily UV exposure. Clear debris and standing water before removing the cover, let both pieces dry before storage, and check the tie-downs each season so it stays secure in high wind.

The Gill Weather Cover for the 65417 Pole Vault Pit fits the 65417 model precisely, shielding the landing foam from the UV rays, rain, and debris that do the most damage between competitions and through the off-season. Pole vault pits are among the most expensive pieces of equipment in a track program, which makes a fitted cover one of the highest-return maintenance items you can buy.

Key features & specs

• Model-matched to the Gill 65417 pole vault pit for a precise fit
• Blocks UV degradation and moisture that break down foam
• Secure coverage that resists wind blow-off and water pooling
• Durable material engineered for multiple outdoor seasons
• Purpose-built alternative to universal tarps that leave gaps

Maintenance tip: keep the pit covered any time it's idle to slow everyday UV aging of the foam. Sweep off debris and drain standing water before removing the cover, dry both pieces before storage, and inspect the fasteners each season so the cover stays put on windy days.

The Gill Weather Cover for the 653 Pole Vault Pit is the purpose-built cover for the Gill Essentials Pole Vault Pit, protecting one of the largest equipment investments in your track program from the elements. Pole vault pit foam is highly susceptible to UV rays, rain, and debris, and a fitted cover is the simplest, most cost-effective way to keep the landing system performing season after season.

Key features & specs

• Sized specifically for the Gill Essentials Pole Vault Pit (19'9" x 20'2" x 26")
• Shields foam landing units from UV exposure, rain, and debris
• Model-matched fit stays secure and resists pooling and blow-off
• Weather-resistant material built for repeated outdoor seasons
• Available in Royal Blue only to match the Essentials pit

Maintenance tip: cover the pit whenever it isn't in active use, not just over the off-season, to get the most foam-saving benefit. Let the pit and cover dry before storing them together, clear off debris and standing water regularly, and check the seams and tie-downs so the cover stays anchored in wind.

The Gill AGX M4 High Jump Pit is the premium tier of Gill's high jump landing systems, built for flagship programs that compete at the highest level. Measuring an expansive 27'-2" x 13'-2" x 28", the M4 exceeds NFHS and NCAA minimums to deliver elite-level coverage, while AGX Countervail construction reduces vibration for consistent, cushioned landings across the entire pit surface.

Key features & specs

• Overall size: 27'-2" x 13'-2" x 28" — oversized for maximum coverage
• AGX Countervail construction reduces vibration for consistent landings
• Durable vinyl cover with a top-pad (TP) surface
• Exceeds NFHS and NCAA high jump safety minimums
• Built for high-caliber competition and flagship track venues

Coach's tip: protect this premium investment with the matching Gill weather cover any time the pit is idle. Clean the vinyl with mild soap and water, keep the landing surface dry to preserve the foam, and store the pit covered or indoors through the off-season to protect the AGX Countervail core for years of elite performance.

The Gill Weather Cover for the 64817 High Jump Pit is engineered to fit the 64817 pit model precisely, protecting the landing foam from rain, sun, and debris during storage and off-season periods. A weather cover significantly extends the lifespan of a high jump pit by preventing the UV degradation and moisture absorption that steadily break foam down — making it one of the smartest small investments a program can make.

Key features & specs

• Precisely sized for the Gill 64817 high jump pit
• Shields foam from UV rays, moisture, and windblown debris
• Holds its shape and protective properties through years of use
• Model-specific design means no awkward fitting or improvised tie-downs
• Weather-resistant material built for demanding outdoor conditions

Maintenance tip: keep the pit covered any time it isn't in use to get the full benefit, not just over winter. Sweep off debris and let everything dry before storing, and give the seams and fasteners a quick check each season so the cover stays secure when the wind picks up.

The Gill G1 High Jump Pit strikes an ideal balance between landing area and footprint, measuring 18' x 10' x 26" — big enough to satisfy high school safety requirements while remaining size-efficient for facilities that can't accommodate a flagship pit. A durable vinyl cover over a top-pad (TP) surface rounds out a landing system that's a popular choice among programs nationwide for its blend of quality and value.

Key features & specs

• Overall size: 18' x 10' x 26"
• Durable vinyl cover with a top-pad (TP) landing surface
• Size-efficient footprint for space-conscious facilities
• Vinyl exterior holds up outdoors and cleans up easily after wet meets
• Satisfies NFHS high jump safety requirements

Coach's tip: add the matching Gill weather cover to shield the foam from UV and rain between meets and extend the pit's usable life. Spot-clean the vinyl with mild soap and water, keep the surface dry to prevent foam breakdown, and store the pit covered or indoors during the off-season whenever possible.

The Gill G4 High Jump Pit gives programs a spacious, confidence-inspiring landing zone at 20' x 13'-2" x 28". Finished with a durable vinyl cover over a top-pad (TP) surface, the G4's larger footprint gives jumpers and coaches added margin during both competition and training — an ideal upgrade for programs building out a full-featured high jump facility.

Key features & specs

• Overall size: 20' x 13'-2" x 28"
• Durable vinyl cover with a top-pad (TP) landing surface
• Expanded footprint for an added margin of safety
• Weather-resistant, easy-to-clean vinyl exterior
• Engineered to meet NFHS and NCAA high jump safety specifications

Coach's tip: protect your investment with the matching Gill weather cover whenever the pit is idle to shield the foam from sun and rain. Wipe the vinyl down with mild soap and water, keep the landing surface dry to guard against foam breakdown, and store the pit covered or indoors through the off-season to maximize its lifespan season after season.

The Gill Weather Cover for the 64417 High Jump Pit is designed to match the 64417 pit model precisely, shielding the foam landing units from the UV exposure, rain, and debris that accelerate breakdown in outdoor track facilities. Covering a pit whenever it's idle is one of the simplest, most cost-effective maintenance habits a program can adopt to protect a significant equipment investment.

Key features & specs

• Model-specific fit for the Gill 64417 high jump pit
• Guards against UV damage, rain saturation, and airborne debris
• Secure, gap-free coverage that won't sag or pool water
• Built from durable material that endures repeated outdoor seasons
• Purpose-made to match the 64417's exact dimensions

Maintenance tip: don't wait for the off-season — cover the pit between practices and meets to slow everyday UV aging. Brush off debris and drain any standing water before removing it, dry both pieces before storage, and inspect the tie-downs annually so the cover holds in high wind.

The Gill S4 High Jump Pit delivers a competition-ready landing system in a footprint compact enough for facilities with limited runway space. Measuring 16'-6" x 10' x 26" and finished with a durable vinyl cover over a top-pad (TP) surface, the S4 gives high school and collegiate programs a generous, safe landing zone without demanding the space of a full flagship pit.

Key features & specs

• Overall size: 16'-6" x 10' x 26"
• Durable vinyl cover with a top-pad (TP) landing surface
• Compact footprint suited to space-limited facilities
• Vinyl exterior is easy to clean and resists the outdoor elements
• Engineered to meet NFHS high jump safety standards

Coach's tip: add the matching Gill weather cover to protect the foam between meets and extend the pit's service life. Spot-clean the vinyl with mild soap and water, keep the surface dry to prevent foam breakdown, and store the pit covered or indoors during the off-season whenever possible.

The Gill Weather Cover for the 64217 High Jump Pit is custom-fitted to the 64217 pit model, giving programs an easy, reliable way to protect their landing system between competitions and through the off-season. Sun, rain, and debris are the enemies of foam, and leaving a pit uncovered can cut years off its life — a snug, model-specific cover keeps the pit in competition shape far longer.

Key features & specs

• Custom-fitted for the Gill 64217 high jump pit
• Protects foam from UV rays, moisture, and windblown debris
• Snug fit prevents water pooling and stays put in wind
• Weather-resistant material engineered for years of outdoor use
• Eliminates the gaps and slippage of universal-fit tarps

Maintenance tip: make covering the pit part of your after-practice routine so it's protected every day, not just seasonally. Clear off leaves and standing water regularly, allow the cover and pit to dry before storing, and check the seams and fasteners at the start of each season.

The Gill Weather Cover for the 64117 High Jump Pit is engineered to fit the 64117 pit model exactly, protecting the foam landing system from the three things that damage it most: UV radiation, rain, and windblown debris. For equipment that represents a major line-item in any track budget, a fitted cover is a low-cost insurance policy that pays for itself in years of extended pit life.

Key features & specs

• Model-matched to the Gill 64117 high jump pit for a precise, gap-free fit
• Blocks UV degradation and moisture absorption that break down foam
• Secure fit resists blow-off in wind and water pooling in rain
• Durable weather-resistant material built for multiple outdoor seasons
• Purpose-built alternative to improvised tarps and universal covers

Maintenance tip: cover the pit any time it isn't in use rather than only over winter — everyday sun exposure is what quietly ages the foam. Sweep off debris before removing the cover, let both pit and cover dry fully before storage, and inspect the tie-downs each season so it stays anchored on windy days.

The Gill Weather Cover for the 640A High Jump Pit is a purpose-built cover for the Gill Essentials High Jump Pit, protecting one of your program's biggest equipment investments from the elements. A high jump pit's foam is highly vulnerable to UV rays, rain, and windblown debris, all of which shorten its usable life — a fitted weather cover is the single most cost-effective way to keep it performing season after season.

Key features & specs

• Sized specifically for the Gill Essentials High Jump Pit (16' x 8' x 24")
• Shields foam landing units from UV exposure, rain, and debris
• Model-matched fit stays secure and resists pooling or sagging
• Weather-resistant material built for repeated outdoor seasons
• Available in Royal Blue only to match the Essentials pit

Maintenance tip: put the cover on whenever the pit isn't in active use, not just over the off-season, to maximize foam life. Let the pit and cover dry before storing them together, brush off standing debris regularly, and check the seams and tie-downs periodically so the cover stays secure in wind.

The Gill Essentials High Jump Pit is an economical landing system that delivers full high-school compliance without the premium price tag, making it a go-to choice for programs building or replacing a high jump area on a budget. In place of a traditional top pad, the Essentials system uses a skirted mesh top that draws the units together for a snug, stable fit — keeping the landing surface tight and unified through every jump.

Key features & specs

• Overall size: 16' x 8' x 24" (4.88m x 2.44m x 0.61m)
• Two base units, each 8' x 8' x 24"
• Skirted mesh top holds units together for a snug fit (no separate top pad)
• Meets all high school rules requirements
• Available in Royal Blue only
• Backed by a five-year warranty

Coach's tip: pair the pit with the matching Gill weather cover to shield the foam between meets and dramatically extend its service life. Store the pit indoors or covered when possible, spot-clean the vinyl and mesh with mild soap and water, and keep the units dry to prevent foam breakdown over the seasons.

The Gill Sloped Pole Vault Standard Base Pads are a mandatory safety component for any compliant pole vault installation, wrapping the exposed base uprights of the standard system in protective padding. The sloped profile is the key: it lets athletes land on and around the standards without striking sharp corners or hard edges, reducing injury risk in the busiest, highest-traffic zone of the vault area.

Key features & specs

• Designed specifically for the Gill 61617C pole vault standard system
• Sloped profile eliminates sharp corners and hard edges at the base
• Protects both athletes and the standard structure during landings
• Precision-fit for seamless integration with compatible standards
• Helps meet safety requirements at high school and collegiate facilities

Facility tip: inspect the pads at the start of every season and replace any with compressed foam or torn covers, since worn padding no longer provides compliant protection. Wipe the covers down with mild soap and water, let them dry fully before storage, and keep them out of prolonged direct sun when the runway is idle to extend cover life.

The Gill 3 Piece Pole Vault Crossbar is the smart-shipping solution for programs that want competition-grade performance without competition-grade freight bills. It's the only Gill competition crossbar engineered to ship in a small package by UPS rather than by truck, dramatically reducing shipping charges and letting you expedite delivery when a meet is on the line. The bar arrives in three sections and assembles quickly in the field, then performs like a one-piece bar once it's set on the standards.

Key features & specs

• Ships in three pieces via UPS small package for lower freight cost and faster, expeditable delivery
• Built from the same durable, thick-walled pultruded fiberglass used in Gill's Collegiate Crossbars
• Assembles on-site for immediate meet-day use
• Meets NFHS and NCAA specifications for high school and collegiate competition
• Consistent flex and roll-off performance expected from a Gill competition bar

Coach's tip: keep a spare on hand so a chipped bar never delays a meet. Store the crossbar horizontally on a rack or in its shipping tube to prevent warping, wipe it down after wet meets, and inspect the sections and end fittings for cracks before each use.

The Gill AGX Pole Vault Crossbar is Gill's premier competition bar, engineered to give vaulters every technical advantage the rules allow. Its exclusive half-moon profile ends lower the bar's center of gravity so it sits more stably on the pegs — keeping the bar up on near-miss clearances that would dislodge a lighter, less stable crossbar and giving athletes the benefit of the doubt at big heights.

Key features & specs:

• Profile ends: Exclusive half-moon ends lower the center of gravity for peg stability
• Weight: Built to the heaviest weight the rules allow for maximum stability
• End pieces: Shorter, more stable, redesigned for improved performance
• Construction: Durable thick-walled pultruded fiberglass rod
• Compliance/Note: Meets High School and NCAA specifications; not guaranteed against breakage; GP-530

Coach's tip: Set the bar with the half-moon ends seated correctly on the pegs for maximum stability, and inspect it for cracks or deep scratches before each session — crossbars aren't guaranteed against breakage, so retire any compromised bar. Store it supported along its full length to prevent a permanent bow.

The Gill AGX is the premier high jump crossbar in Gill's competition lineup — purpose-built for athletes and facilities that demand every technical advantage the rules allow. The AGX's patented half-moon end profile and maximum-allowable weight work together to keep the bar on the pegs through near-miss clearances that would dislodge a lighter, less stable crossbar, giving jumpers the benefit of the doubt on borderline attempts.

• Exclusive Half-Moon Profile Ends – Patented half-moon shaped end pieces lower the crossbar's center of gravity compared to standard round-end bars, keeping the bar sitting more stably on the standard pegs and reducing the chance of the bar falling on near-miss clearances — a critical competitive advantage for athletes pushing personal records and championship heights
• Heaviest Crossbar the Rules Allow – The AGX is engineered to the maximum weight permitted under competition rules, providing the greatest possible bar stability and peg-sitting inertia — heavier bars are less easily dislodged by incidental contact, giving jumpers more margin on close clearances at high heights
• Thick-Walled Pultruded Fiberglass Rod – Premium thick-walled fiberglass construction through the pultruding process delivers consistent flex characteristics, minimum sag across the full 13'1-1/2" span, and the structural integrity needed to withstand the physical demands of high-volume competition and practice use
• Redesigned Shorter, More Stable End Pieces – Updated end piece geometry is shorter and more precisely contoured than previous designs, providing improved contact stability on standard pegs and a more consistent bar-to-peg interaction across different standard brands and configurations at competition venues
• World Athletics, NFHS, and NCAA Certified – Carries full World Athletics (IAAF) certification and meets NFHS and NCAA specifications, making it competition-legal at high school, collegiate, and international competition levels without requiring different bars for different meet standards
• Standard 13'1-1/2" Competition Length – Full regulation length for high jump competition, compatible with all standard high jump uprights; also suitable for pole vault crossbar use — ships via freight carrier due to length; ordering multiple bars helps offset shipping costs

The Gill Elastic Krossband is a training crossbar that takes the fear out of learning to clear height in the pole vault and high jump. Instead of a rigid bar, it uses a bright fluorescent orange elastic cord with foam sections — so athletes get a clear visual target and honest feedback on clearance without the intimidation or risk of a hard fiberglass bar.

Key features & specs:

• Type: Elastic training crossbar for pole vault and high jump
• Cord: Bright fluorescent orange for high visibility
• Sections: 1" diameter foam sections along the cord
• Benefit: Builds confidence and technique without a rigid bar
• Model: GP-528

Coach's tip: Use the Krossband for beginners and height-progression drills so athletes commit fully without fearing a hard bar, then transition to a competition crossbar. Store it loosely coiled to preserve the elastic's stretch, and keep it out of prolonged sun to protect the foam and cord.

The Gill Essentials High Jump Standards deliver the durable, competition-legal construction athletic directors expect at a value price. Built for high school and college programs, they set up quickly, roll easily into position, and read heights in both English and metric — everything a coach needs to run clean, efficient jump sessions at practice or on meet day.

Key features & specs:

• Construction: All-steel with a durable black powder-coat finish
• Base: 18" square base with built-in wheels for easy mobility
• Height scale: Reads both English and metric, from 2' to 8'
• Compliance: Meets High School and NCAA specifications
• Warranty: Five-year warranty; model GP-700

Coach's tip: Set standards on a firm, level surface and confirm both crossbar supports read the same height before each jump to keep the bar true. Wipe down after wet meets and store indoors to protect the powder coat and keep the rolling bases turning freely for years.