Track & Field Equipment

Keep sand, leaves, and debris out of your jump pit with the Blazer Jump Pit Vinyl-Coated Mesh Pit Cover. Made from durable 10-oz vinyl-coated polyester mesh, it lets air and light rain pass through while keeping the pit clean between sessions — with attached weight pouches to hold the cover securely in place.

Key features & specs:

• 10-oz vinyl-coated polyester mesh construction
• Mesh design lets air pass through to reduce wind lift
• Comes with unfilled, attached weight pouches for anchoring
• NOT waterproof — a mesh debris cover, not a rain barrier
• Available in six colors (Red, Royal, Kelly, Black, Light Gold/Yellow, Gray)

A practical cover for long jump and triple jump programs keeping their sand pits clean. Choose your color and size when ordering, fill the weight pouches with sand to anchor the cover, and spread it over the pit whenever it's not in use. For rain protection, choose the waterproof vinyl version instead. Let the cover dry before folding and store it dry to maximize its life.

Keep your vault runway stocked with the Blazer Deluxe Fiberglass Pole Vault Crossbar — Set of 3. Blazer's finest crossbar, in a value three-pack, gives your vault program the backups it needs across meets and practice — built with the same double-matte pultruded construction preferred and used by many world-class competitors.

Key features & specs:

• Set of 3 Deluxe Fiberglass pole vault crossbars — a money-saving bundle
• Double-matte pultruded fiberglass for consistent flex and durability
• Meets Collegiate, International, and High School Federation specs
• Preferred and used by many world-class competitors
• Length 14'10" each (pole vault length)

A cost-effective buy for pole vault programs that want spare bars ready for meets and daily practice. Set each bar evenly on the standard pins and handle them carefully to avoid nicks and cracks that affect performance. Store the crossbars flat and fully supported along their length in a dry space to prevent bowing, so they stay true and competition-ready season after season.

Stock your high jump venue and save with the Blazer Deluxe Fiberglass High Jump Crossbar — Set of 3. Blazer's finest crossbar, in a value three-pack, gives your program the backups it needs for meets and practice — with the same double-matte pultruded construction preferred and used by many world-class competitors.

Key features & specs:

• Set of 3 Deluxe Fiberglass high jump crossbars — a money-saving bundle
• Double-matte pultruded fiberglass for consistent flex and durability
• Meets Collegiate, International, and High School Federation specs
• Preferred and used by many world-class competitors
• Length 13'1-1/2" each

A smart, cost-effective buy for high jump programs that want spares on hand for meets and daily practice. Set each bar evenly on the standard pegs and handle them carefully to avoid nicks and cracks. Store the crossbars flat and fully supported along their length in a dry space to prevent bowing, so they stay true and competition-ready season after season.

Set the bar with the best: the Blazer Deluxe Fiberglass High Jump Crossbar is the company's finest crossbar, preferred and used by many world-class competitors. Its double-matte pultruded construction delivers the consistent flex, balance, and durability serious high jumpers demand — meeting Collegiate, International, and High School Federation specifications.

Key features & specs:

• Double-matte pultruded fiberglass construction for consistent performance
• Meets Collegiate, International, and High School Federation specs
• Preferred and used by many world-class competitors
• Length 13'1-1/2"
• Available individually — or save with the Set of 3

A premium, competition-grade crossbar for high jump programs at every level. Set it evenly on the standard pegs before each attempt, and handle it carefully to avoid nicks and cracks that affect performance. Store the crossbar flat and fully supported along its length in a dry space to prevent bowing, so it stays true and competition-ready season after season.

Outfit your boys' throws program in one purchase with the Blazer Boy's Implement Value Package. This complete bundle gives developing throwers a full set of 1.6K discus in three constructions plus a pair of 12 lb shots and carrying bags — everything a coach needs to run practice across discus and shot put without sourcing each piece separately.

Key features & specs:

• #1337 1.6K Boys Rubber Discus, #1340 1.6K Boys Laminate Discus, and #1350 1.6K Boys Lazer Discus
• #1980 12 lb Boys Iron Shot and #2212 12 lb Boys Turned Steel Shot
• Two #2155 Shot/Discus Bags with shoulder straps for easy transport
• Covers the boys' high school competition weights for discus and shot
• Complete package weighs 38 lbs

A cost-effective, ready-to-go package for high school boys' throws programs. Match each implement to your athletes' event and competition weight, use the included bags to carry implements to the ring, and inspect the discs and shots periodically for damage. Store everything dry in the bags so your implements stay true and ready for every practice and meet.

Keep your jump pit covers anchored and secure with the Blazer Replacement Sandbag with Velcro. Designed for use with Blazer #1604 pit covers, this Velcro-closure sandbag attaches to the cover's weight pouches to hold it firmly in place — so wind doesn't lift your sand pit cover and expose the pit between sessions.

Key features & specs:

• Velcro closure for easy filling and secure attachment
• Designed for use with Blazer #1604 jump pit covers
• Holds approximately 5 lbs of sand when filled (arrives unfilled)
• Compact 7" x 14" size
• A direct replacement for lost or worn cover weights

A practical, low-cost replacement for long jump and triple jump programs maintaining their pit covers. Fill the bag with sand and seal the Velcro closure, then attach it to your pit cover's weight pouches to anchor the cover against wind. Empty and store the bags dry in the off-season, and keep a few spares on hand so a lost weight never leaves your pit cover unsecured.

Help your jumpers and vaulters hit their steps every time with the Blazer Runway Marker Set. These solid-steel discs mark approach checkpoints on synthetic runway surfaces, giving athletes clear, consistent visual references for their run-up in the long jump, triple jump, high jump, and pole vault.

Key features & specs:

• Designed for marking approaches on synthetic surfaces
• Solid steel construction for durability and stability
• Five bright colors so athletes can distinguish their marks
• Low-profile discs that won't interfere with the approach
• Priced per set of 5

A simple, affordable coaching aid for track programs dialing in approach consistency. Set the markers at each athlete's checkpoints during practice so they groove a repeatable run-up, and assign colors to different jumpers to avoid confusion. Collect them after each session, wipe them clean, and store the set together so they're always ready for the next practice or meet.

Verify throwing implements quickly and accurately with the Blazer Digital Implement Scale. With a 55 lb capacity and a clear digital readout, it lets officials and coaches weigh shots, discs, hammers, and weights at the certification table — a compact, dependable tool for keeping every implement within spec.

Key features & specs:

• 55 lb weighing capacity for all standard throwing implements
• Patented detachable display and keypad for flexible positioning
• Programmable auto-off and backlight features
• Includes a multi-sized holder and extendable bracket for versatile weighing
• Powered by 4 "C" cell batteries or an AC adapter (neither included); 9 lbs

A practical certification tool for meet officials and throws coaches who need to confirm implement weights on site. Place the scale on a flat, stable surface, zero it before weighing, and use the detachable display for an easy read. Remove the batteries during long off-season storage, keep the scale clean and dry, and store it in your certification kit so it's ready for every meet.

Protect vaulters at the most dangerous point on the runway with the Blazer Pole Vault Box Collar System. Engineered to meet the ASTM F2949-12 standard required by 2015 NCAA and NFHS rules, this padded collar surrounds the vault box to cushion hard landings in the box area — a critical safety upgrade for any compliant pole vault setup.

Key features & specs:

• Meets ASTM F2949-12 to comply with 2015 NCAA and NFHS rules
• Fits any pole vault landing system
• Heavy-duty vinyl cover over ASTM-tested polyethylene foam filler
• Four in-ground anchor system limits shifting of the landing area
• Special hinge folds the collar in half for UPS shipment (20 lbs; 60" x 25" x 9")

An essential safety component for any program running pole vault competition. Anchor the collar around the vault box with the four-point ground system before every meet and practice, and confirm it's secure and properly positioned. Inspect the foam and cover regularly for wear, keep it dry between uses, and replace it if the padding degrades to stay rule-compliant and protect your vaulters.

Define a regulation throwing circle for the hammer with the Blazer Hammer Ring. Built from durable aluminum angle in easy-to-handle sections, it anchors into your throwing area to form a clean, permanent circle — meeting IAAF, NCAA, and NFHS rules so your hammer venue is competition-ready at every level.

Key features & specs:

• 1" x 3/4" x 1/4" aluminum angle construction
• Ships in 4 sections for easier handling and installation
• Anchor holes provided for secure ground mounting
• Meets IAAF, NCAA, and NFHS rules
• Dimensions 73" x 17" x 2" (13 lbs)

A durable, rules-compliant circle for high school and collegiate throws programs building or upgrading a hammer venue. Assemble the four sections and anchor the ring flush with the throwing surface per competition specs, confirming it's level and secure before use. Keep the ring clear of debris and inspect the anchors periodically so your hammer circle stays safe and competition-ready for years.

Set a regulation shot put circle with the Blazer Shot Put Ring. Constructed from durable aluminum angle in easy-to-handle sections, it anchors into your throwing area to form a clean, permanent circle — built to IAAF, NCAA, and NFHS specifications so your shot put venue is competition-ready at every level.

Key features & specs:

• 1" x 3/4" x 1/4" aluminum angle construction
• Ships in 3 sections for easier handling and installation
• Anchor holes provided for secure ground mounting
• Regulation 7' ring diameter
• Meets IAAF, NCAA, and NFHS rules (25 lbs)

A durable, rules-compliant circle for high school and collegiate throws programs building or upgrading a shot put venue. Assemble the three sections and anchor the ring flush with the throwing surface per competition specs, pairing it with a regulation toe board and confirming it's level and secure before use. Keep the ring clear of debris and inspect the anchors periodically so your circle stays competition-ready for years.

Define a regulation throwing circle with the Blazer Discus Ring. Built from sturdy aluminum angle in easy-to-handle sections, it installs into your discus area with anchor holes for a secure, permanent circle — meeting IAAF, NCAA, and NFHS rules so your throws area is competition-ready at every level.

Key features & specs:

• 1" x 3/4" x 1/4" aluminum angle construction
• Ships in 4 sections for easier handling and installation
• Anchor holes provided for secure ground mounting
• Regulation 8'2-1/2" ring diameter
• Meets IAAF, NCAA, and NFHS rules (14 lbs)

A durable, rules-compliant circle for high school and collegiate throws programs building or upgrading a discus venue. Assemble the four sections and anchor the ring flush with the throwing surface per competition specs, confirming it's level and secure before use. Keep the ring clear of debris and inspect the anchors periodically so your discus circle stays safe and competition-ready for years.

Build a permanent, drainable long jump take-off with the Blazer Stainless Steel Long Jump Tray with 8" Wood Board. The 16-gauge stainless tray installs into your runway with leveling bolts and drain holes, and the included 8" regulation board drops right in — a professional, low-maintenance setup that keeps your take-off area level, dry, and competition-ready.

Key features & specs:

• Designed to work with the included #1248 8" take-off board
• 16-gauge stainless steel tray with a 1" square-tubing frame
• Six leveling bolts to align the board flush with the runway
• Drain holes for easy water drainage; boards lift out when not in use
• Dimensions 51" x 10" (53 lbs)

An excellent runway upgrade for high school and collegiate long jump programs. Install the tray flush with the runway using the leveling bolts, drop in the board for competition, and remove it when the runway is idle to extend its life. Clear the drain holes of grit and store the board dry so both the tray and board stay in top shape for years.

Groove the spin without the coach hovering over every rep: the Blazer Discus Trainer is the perfect tool for teaching rotational technique in the discus and shot put. Durable yet lightweight and easy to move, it lets athletes get high-quality reps on their own — freeing coaches to work with other events while throwers build muscle memory.

Key features & specs:

• Trains spin technique for both discus and shot put
• Durable but lightweight and easy to move around
• Designed for solo use — athletes get reps without constant supervision
• Adjustable to fit any athlete
• Used at the collegiate, high school, and middle school levels

A versatile training aid for throws coaches developing technique across a full squad and every skill level. Set it up for repeated rotational reps so athletes can self-train while you coach other groups, and adjust it to fit each thrower. Wipe it down after use and store it in a dry space so it's ready for the next practice session.

Keep your throws area durable and measurement-friendly with the Blazer Metal Toe Board. Built to resist warping, splitting, and weather deterioration, it stands up to the demands of shot put competition — and radiating lines on its surface help officials line up and speed accurate measurements after every throw.

Key features & specs:

• Durable metal construction won't warp, split, or deteriorate in weather
• Radiating lines speed up accurate measurement
• Built to withstand repeated shot put impact
• Regulation stop-board profile for competition
• A low-maintenance choice for year-round outdoor use

A dependable, weatherproof toe board for high school and collegiate throws programs. Secure it at the front of your shot put circle per competition specs before each meet, and confirm it's firmly anchored and undamaged before use. Wipe it clean of grit and dirt after sessions and store it in a dry space between seasons so it stays accurate and competition-ready for years.

Get the durability of metal in a competition stop board with the Blazer Aluminum Toe Board. Its cast aluminum construction is built for years of heavy use, and a recessed design fits your throwing ring cleanly — with end tie-downs to keep it locked in place through every shot put attempt.

Key features & specs:

• Cast aluminum construction for long-lasting durability
• Recessed design to seat cleanly against the ring
• Tie-downs provided on each end for secure anchoring
• Meets all rule specifications for shot put competition
• Dimensions 55" x 11" x 4" (27 lbs)

A rugged, competition-grade toe board for high school and collegiate throws programs that want a board built to last. Secure it at the front of your shot put circle with the end tie-downs before each meet, and confirm it's firmly anchored and undamaged before use. Wipe it clean of grit after sessions and store it in a dry space between seasons so it stays competition-ready for years.

Give your shot put circle a lightweight, weather-tough stop board with the Blazer Fiberglass Toe Board. Molded to conform to official rules, its weather-resistant, colorfast fiberglass build stands up to the elements and repeated impact — with tie-downs on each end so it stays firmly secured through every throw.

Key features & specs:

• Molded fiberglass conforms to official competition rules
• Weather-resistant and colorfast for lasting outdoor use
• Tie-downs provided on each end for secure anchoring
• Lightweight yet durable under repeated shot put impact
• Dimensions 53" x 14" x 6" (10 lbs)

A practical, rules-compliant toe board for high school and collegiate throws programs. Secure it at the front of your shot put circle using the end tie-downs before each meet, and confirm it's firmly anchored and undamaged before use. Wipe it clean of grit after sessions and store it in a dry space between seasons so it stays competition-ready for years.

Anchor your shot put circle with the tough, weatherproof Blazer Rigid Polyurethane 4' Toe Board. Its cross-linked interior design gives it extreme strength to stand up to the pounding of shot put competition, while a waterproof, UV-protected build means it holds up outdoors season after season without cracking or fading.

Key features & specs:

• Rigid polyurethane construction with a cross-linked interior for extreme strength
• Waterproof and UV-protected for lasting outdoor durability
• Regulation stop-board dimensions for shot put competition
• Withstands repeated impact without cracking or deteriorating
• Dimensions 55" x 12" x 5" (13 lbs)

A durable, low-maintenance toe board for high school and collegiate throws programs. Secure it at the front of your shot put circle per competition specs before each meet, and check that it's firmly anchored and undamaged before use. Wipe it clean of grit after sessions and store it in a dry space between seasons so it stays competition-ready for years.

Outfit your runway with a classic, rules-compliant take-off surface: the Blazer Wood Long Jump Take-Off Board. Manufactured from laminated wood and finished in durable white enamel, this 8" board meets rule-book specifications for both high school and collegiate use — the standard-width board jumpers know and trust.

Key features & specs:

• 8"-wide regulation take-off board
• Manufactured from laminated wood for strength and consistency
• Sealed, primed, and finished with white enamel paint
• Meets rule-book specifications for high school and collegiate use
• Dimensions 2-1/2" x 8" x 48"

A dependable, competition-grade choice for long jump programs replacing a worn board or building a runway. Install the board flush with the runway surface per competition specs, and remove or cover it when the runway isn't in use to protect the finish. Let it dry after wet meets and store it in a dry space so the laminated wood doesn't swell or warp over time.

Give your long jump runway a professional, weather-smart setup with the Blazer Stainless Steel Long Jump Tray with 20" Wood Board. The stainless tray installs into your runway with drain holes to shed water, and the included 20" take-off board drops right in — a durable, low-maintenance system that keeps your take-off area clean and competition-ready.

Key features & specs:

• 20" stainless steel tray with drain holes for water runoff
• Includes the #1242 20" take-off board
• Boards lift out when not in use to protect them and the runway
• Corrosion-resistant stainless steel construction
• Dimensions 51" x 21" x 5" (54 lbs)

An excellent runway upgrade for high school long jump programs that want a permanent, drainable take-off system. Install the tray flush with the runway, drop in the board for competition, and remove the board when the runway is idle to extend its life. Clear the drain holes of grit and store the board dry so both the tray and board stay in top shape for years.

Keep your long jump runway competition-ready with the Blazer 20" Long Jump Take-Off Board. Manufactured from marine-grade plywood and finished with durable white enamel, this wide take-off board meets high school rules and gives jumpers a clean, consistent, highly visible surface to hit their mark.

Key features & specs:

• 20"-wide take-off board for a generous, visible take-off surface
• Manufactured from marine-grade plywood to meet high school rules
• Sealed, primed, and finished with white enamel paint for weather resistance
• Dimensions 2-3/4" x 20" x 48"
• A direct replacement or upgrade for your long jump runway

A durable, rules-compliant choice for high school long jump programs replacing a worn board or building out a runway. Install the board flush with the runway surface per competition specs, and remove or cover it when the runway isn't in use to protect the finish. Let it dry after wet meets and store it in a dry space to prevent the plywood from swelling or warping over time.

Launch a high jump program in one purchase with the Blazer Elementary High Jump Package. This complete value bundle pairs an appropriately sized elementary landing system with everything a young program needs to start jumping right away — standards, a crossbar, and a weather cover to protect the whole setup between sessions.

Key features & specs:

• #1251 Elementary Pit (12' x 6' x 24")
• #1251WC Weather Cover to protect the pit from the elements
• #1215 Steel High Jump Standards (one pair)
• #1511 Deluxe Fiberglass Crossbar
• Choose base, top, and weather-cover colors to match your program

An ideal, cost-effective package for elementary and youth programs building a high jump venue from scratch. Assemble the system on level ground per Blazer's instructions, keep the weather cover on the pit whenever it's not in use to protect the foam from moisture and UV, and inspect the pad and cover each season so your landing system stays safe and ready for years of young jumpers.

Protect your landing system investment from the ground up with the Blazer Aluminum Pit Platform. Built from non-corrosive aluminum, this modular platform elevates your high jump or pole vault pit off the ground — improving airflow and drainage to guard the foam base units from moisture and water damage over years of outdoor use.

Key features & specs:

• Non-corrosive aluminum construction for long outdoor life
• Modular design for quick, straightforward assembly
• Elevates the pit to protect foam from ground moisture and water damage
• Sized to your pit — price is listed per square foot
• Call with your pit dimensions for an accurate total price

A smart, protective foundation for any program installing a high jump or pole vault landing system. Provide your exact pit dimensions when ordering so the modular platform is sized correctly, assemble it on level ground beneath the pit, and keep the platform clear of debris so water drains freely. A worthwhile investment that meaningfully extends the life of an expensive landing system.

Outfit your program affordably with the Blazer Steel High Jump Standard. Built entirely from durable steel with a powder-coated upright, it's a rugged, budget-friendly standard that covers the full range of high school competition — a dependable workhorse for daily practice and meets alike.

Key features & specs:

• All-steel construction for lasting durability
• Powder-coated upright resists wear and keeps a clean appearance
• Adjusts from 12" to 7'6", marked on the upright in 1/2" increments
• Stable, dependable base for competition and practice
• Sold in pairs (compatible with the optional #1202 wheel kit for easy transport)

A cost-effective, durable standard for high school high jump programs. Set the crossbar height to match each athlete and level the standards on the runway before competition, adding the optional wheel kit if you move them often. Wipe them down after wet meets to protect the powder-coat finish and prevent rust, and store them indoors so they stay competition-ready for years.

Bring championship-grade performance to your high jump with the Blazer Collegiate Aluminum High Jump Standard. Anodized aluminum uprights with a telescoping riser and a stable steel roll-away base with leveling screws deliver the precision and portability collegiate competition demands — NCAA and IAAF certified for sanctioned meets.

Key features & specs:

• 2.5"D x 5.5"W anodized aluminum uprights with a telescoping riser
• Adjusts from 1.5' to 9'; heights marked in English and metric
• Steel roll-away base with adjustable leveling screws for stability on any surface
• Powder-coated black finish for a lasting appearance
• NCAA and IAAF certified; sold in pairs (64 lbs)

A premium, fully compliant standard for collegiate and championship-level high jump programs. Roll the standards into position, level them with the base screws, and set the crossbar height per each athlete and competition rules. Wipe the aluminum and steel down after use and store them indoors so the standards stay accurate, stable, and competition-ready for years.

Move your high jump standards effortlessly with the Blazer Steel Roll-Away High Jump Standard. Built with a stable 16" base on wheels, it rolls smoothly into position and off the runway between events — a durable, easy-to-handle standard suited to both high school and college competition across the full height range.

Key features & specs:

• Adjusts from 2' to 8' in 1/4" intervals; metric scale 62–244 cm
• Powder-coated steel uprights for durability
• 16" base with built-in wheels for easy roll-away transport
• Suitable for high school and college competition
• Sold in pairs (38 lbs)

A practical, movable standard for programs that reposition their high jump setup regularly. Roll the standards into place and level them on the runway before competition, setting the crossbar to match each athlete. Wipe the wheels and uprights down after wet meets so they roll freely and resist rust, and store them indoors to keep them accurate and competition-ready for years.

Get dependable stability and full-range adjustability with the Blazer Deluxe Aluminum High Jump Standard. A sturdy steel 16" square base anchors a lightweight, powder-coated upright, giving officials a stable, easy-to-set standard that covers every height from youth through elite competition — with an included wheel kit for easy transport.

Key features & specs:

• Adjusts from 2'3" to 8'6", marked in 1/2" increments
• Heights marked in both English and metric
• Steel 16" square low-profile base for uniform stability
• Powder-coated upright with a 3"-wide lower section; wheel kit included
• Sold in pairs

A stable, versatile standard for high school and collegiate high jump programs. Set the crossbar height to match each athlete and roll the standards into position with the included wheel kit, leveling them on the runway before competition. Wipe them down after wet meets and store them indoors so the base, upright, and hardware stay accurate and competition-ready for years.

Set the bar at any height with the Blazer Elite Aluminum High Jump Standard. Its lightweight aluminum build and low-profile 16" square base deliver uniform stability across the full competition range, while an included wheel kit makes moving the standards on and off the runway quick and easy — a premium, portable choice for programs at every level.

Key features & specs:

• Adjusts from 2'3" to 8'6", marked in 1/2" increments
• Heights marked in both English and metric
• Aluminum 16" square low-profile base for uniform stability
• Powder-coated upright with a 3"-wide lower section; wheel kit included
• Sold in pairs

A durable, portable standard for high school and collegiate high jump programs. Set the crossbar height to match each athlete and roll the standards into position using the included wheel kit, leveling them on the runway before competition. Wipe them down after wet meets and store them indoors so the aluminum and hardware stay accurate and competition-ready for years.