Gill Athletics

The Gill Sloped Manual AGX PV Standard Base Pads are purpose-built for Gill's AGX M2 manual pole vault standards, giving your program a precise-fit safety component instead of a generic one-size compromise. The sloped profile is contoured to the AGX M2 base so the pads seat correctly and cushion the standard bases, protecting vaulters from hard contact and shielding poles from impact during vaults and dismounts. For any facility running AGX M2 standards, these are the matched base pads that complete a safe, competition-ready pole vault setup.

Key features & specs

• Designed specifically for Gill AGX M2 (manual) Pole Vault Standards
• Sloped profile contoured to the AGX M2 base for a precise fit
• Protects vaulters from impact with the standard bases
• Also shields poles from base contact during use
• Sold in pairs (one per standard)

Coach's tip: Confirm you're running AGX M2 manual standards before ordering — pads are shaped per standard model and won't seat correctly on a different base. Care: Wipe clean, dry fully before storage, and inspect for compression or tears each season so the pads keep cushioning as intended.

The Gill Sloped AGX M4 PV Standard Base Pads are engineered specifically for Gill's AGX M4 pole vault standards, delivering a precise, purpose-built fit that generic pads can't match. Their sloped profile is contoured to the AGX M4 base geometry, cushioning the standard bases so vaulters and poles are protected from hard contact during vaults and dismounts. For programs running AGX M4 standards, these are the correct, competition-ready base pads to complete a safe pole vault setup.

Key features & specs

• Designed specifically for Gill AGX M4 Pole Vault Standards
• Sloped profile contoured to the AGX M4 base for a precise fit
• Protects vaulters from impact with the standard bases
• Also shields poles from base contact during use
• Sold in pairs (one per standard)

Coach's tip: Match your base pads to your exact standard model — AGX M4 pads are shaped for that base and won't seat correctly on other standards. Care: Wipe clean, dry fully before storing, and check for wear or compression each season so the pads continue to cushion as designed.

The Gill Flat PV Standard Base Pads deliver critical protection at the base of your pole vault standards — one of the most overlooked collision points in the event. Positioned around the standard bases, they shield vaulters from hard contact and protect expensive poles from impact damage during vaults and dismounts. For any program running pole vault, base pads are a fundamental safety investment that keeps athletes confident and equipment intact.

Key features & specs

• Fits 28" tall Gill systems and all standards with center-mounted uprights
• Protects vaulters from impact with the bases of the pole vault standards
• Also shields poles from hitting the standard bases
• Flat profile designed for center-mounted upright configurations
• Sold in pairs (one per standard)

Coach's tip: Confirm your standards use center-mounted uprights before ordering — the flat profile is designed specifically for that configuration. Care: Wipe the vinyl surface clean, allow to dry before storage, and inspect the pads for compression or tears at the start of each season to ensure they still cushion effectively.

The Gill U90 Premier Portable Soccer Goals deliver premium, competition-quality construction with the mobility a busy multi-use facility demands. Built from 4" round aluminum in a clean white powder-coated finish, they combine a professional match-day presence with true portability — and Gill's signature Upper90 lift-and-roll wheels let a small crew reposition a fully assembled goal without heavy equipment. The complete package arrives with premium nets, anchors, and weighted back bar, so you're ready for regulation play right out of the crate.

Key features & specs

• Regulation 8' x 24' x 8' goals in 4" round aluminum construction
• Durable white powder-coated finish
• Equipped with European backstays and signature Upper90 lift-and-roll wheels for easy repositioning
• Package includes: goals (pair), 3mm x 5" square braided nets (pair), Quick Clip Net System, easy-to-engage wheel assemblies (4), auger anchor kit, and back bar with weights

Coach's tip: Engage the wheels to roll goals off the pitch after matches — it protects the goal line turf and speeds field changeovers. Always anchor before play. Care: Rinse the frame after muddy play, store nets dry to prevent mildew, and check anchors and wheel assemblies at the start of each season.

The Gill 19.5" Composite Take-Off Board System gives long jump and triple jump programs a wider, competition-legal take-off zone built to outlast traditional wood. The 19.5" configuration provides added take-off surface for training and multi-standard use, while Gill's Polyboard composite delivers dependable grip meet after meet without the splitting, warping, or rot that plague wooden boards. It arrives as a complete, ready-to-install system so your runway is meet-ready with a single order.

Key features & specs

• Complete system includes the installation tray, aluminum base board, and reversible take-off board
• 19.5" composite take-off surface for added take-off area
• Polyboard composite construction — environmentally friendly, waterproof, and will not split or crack
• Offers jumpers excellent, consistent grip
• Reversible board flips to a fresh face to extend usable life
• Meets NFHS specifications

Coach's tip: Flip the reversible board to its fresh side once the take-off zone shows wear — it doubles service life before a replacement is needed. Care: Rinse grit and standing water off after wet meets; the waterproof composite requires no sealing or painting like wood boards do.

The Gill Hurdle Flight Cart is engineered to be the most convenient and efficient way to move a full set of hurdles across your facility. Its standout four-wheel design tracks straight and corners cleanly — a real upgrade over three-wheel carts that tend to cut corners and tip under load. Load up to ten hurdles and roll them from storage to the track in a single trip, saving setup time before practice and cleanup time after.

Key features & specs

• Four-wheel design delivers superior maneuverability versus corner-cutting three-wheel carts
• Efficiently supports up to 10 hurdles at a time
• Sturdy steel construction built for daily program use
• Durable black powder-coat finish resists rust and wear
• Designed for smooth transport across gym floors, hallways, and infield surfaces

Coach's tip: Load hurdles in race order so athletes can pull and set them down the lane without re-sorting — it streamlines interval workouts. Care: Wipe down after wet-weather use to protect the powder coat, and periodically check wheel hardware to keep it rolling true.

The Gill Surface Roller is the fastest way to get your facility back in action after rain. Designed to clear standing water from tracks, runways, and throwing circles, this wide roller pushes puddles off the surface quickly and easily so practices and meets can start on time instead of waiting for the sun. Its versatility makes it a valuable multi-sport tool — it works just as well squeegeeing outdoor tennis and pickleball courts as it does prepping a track after a storm.

Key features & specs

• Clears water from tracks, runways, and throwing circles quickly and efficiently
• Generous 36" working width covers more ground with each pass
• Also ideal for drying outdoor courts, including tennis and pickleball
• Simple, durable design built for repeated facility use
• A must-have for weather-dependent outdoor programs

Coach's tip: Keep the roller near your track access gate so crews can clear lanes the moment rain stops — you'll reclaim valuable practice and warm-up time. Care: Rinse off grit after use, dry before storing, and store indoors or under cover to protect the roller surface between uses.

The Gill Composite Take-Off Board for the 441TS System gives long jump and triple jump programs a competition-legal take-off surface engineered to outlast traditional wood. Made from Gill's Polyboard composite, it delivers dependable grip for jumpers meet after meet while shrugging off the moisture and repeated impact that split and warp wooden boards. Whether you're replacing a worn board or completing a full 441TS installation, it drops in cleanly and keeps your runway meet-ready.

Key features & specs

• Composite Polyboard construction — environmentally friendly, waterproof, and won't split or crack
• Delivers reliable grip and a true surface for consistent take-offs
• Reversible design flips to a fresh surface to extend usable life
• 441TS complete system option includes installation tray, aluminum base board, and reversible take-off board
• Model 44105 available as the take-off board only for straightforward replacement
• Meets NFHS specifications

Coach's tip: When one side shows wear, flip the board to the fresh face before buying a replacement — it effectively doubles service life. Care: Rinse off grit and standing water after wet meets; the waterproof composite needs no sealing or painting like wood boards do.

The Gill 41" Hurdle Cart – 18–20 capacity is designed for track and field programs that operate at scale — handling the full complement of hurdles needed for a complete race setup in one trip. The walk-in design eliminates the awkward stacking and unstacking process that wastes practice time, while the swivel caster configuration makes navigating gym floors, hallways, and infield surfaces straightforward for a single operator.

• • 18–20 Hurdle Capacity – The largest configuration in Gill's hurdle cart lineup, holding a full set of 18 to 20 hurdles in a single cart — eliminating multiple trips across the facility and dramatically reducing the time coaches and athletes spend on hurdle setup and breakdown before and after practice
  • Unique Walk-In Design – Open walk-in frame allows hurdles to be loaded and unloaded by simply walking them in and out of the cart structure without complex stacking, tilting, or mechanical loading, making the process fast and manageable for one person
  • All-Steel Powder-Coated Construction – Heavy-gauge steel frame with a durable black powder coat finish provides the structural rigidity to handle the combined weight of 18–20 hurdles without flexing or deforming, while the powder coat protects against rust and surface wear through years of daily facility use
  • Large Swivel Casters – Oversized swivel casters allow the fully loaded cart to turn, maneuver, and navigate tight spaces with minimal effort, making it practical to push a full load of hurdles across the infield, through hallways, and into storage areas without requiring multiple operators
  • Compatible with Rocker and "L" Style Hurdles – Designed to accommodate both rocker-base and "L" shaped hurdle styles, making it compatible with Gill's full range of track hurdles as well as most other brands' standard hurdle configurations used at the high school and collegiate level
  • 41" Width Configuration – Sized at 41" to match the standard width of collegiate and high school track hurdles, ensuring a proper fit and secure hold during transport without hurdles shifting or tipping inside the cart during movement

The Gill 41" Hurdle Cart (8–10 capacity) takes the hassle out of moving and storing hurdles so coaches spend practice time coaching, not hauling. Its unique walk-in design lets a single person load and unload hurdles by simply walking them in and out of the frame — no awkward stacking, tilting, or lifting. Built for daily track program use, it rolls easily from storage to the infield and back, keeping your hurdle inventory organized and protected between sessions.

Key features & specs

• Unique walk-in design for fast, one-person loading and unloading
• Holds 8–10 hurdles (this 41" model; also offered in a 35" height)
• Heavy-duty steel construction with a durable black powder-coat finish
• Large swivel casters for smooth, easy transport across gym floors, hallways, and infield surfaces
• Compatible with both rocker-style and 'L'-style hurdles

Coach's tip: Stage the loaded cart at the start of your hurdle lane so athletes can grab and reset hurdles quickly during interval work. Care: The powder-coat finish resists rust; wipe down after wet-weather use and check caster hardware periodically to keep rolling smooth.

The Gill Shot/Hammer Circle Form in aluminum gives throws programs a permanent, competition-legal foundation for shot put and hammer events. Designed for in-ground installation, the four-section form bolts together into a perfectly true circle and serves as the mold for a smooth, crack-resistant concrete pour — delivering the consistent, level throwing surface athletes and officials expect at sanctioned meets. Once set, it becomes a fixed part of your facility that will handle years of daily practice and competition without shifting or degrading.

Key features & specs

• Four sections of 2" x 3" aluminum angle that bolt together to form the circle
• Built for permanent in-ground installation
• Aluminum exterior bracing creates a strong, rigid frame that holds shape during the pour
• Open center allows a smooth concrete pour and a crack-resistant finished surface
• Inner circle constructed of 1/4" x 3" flat aluminum bar
• Compatible with Gill toeboards 358 and 363
• Meets NFHS, NCAA, and World Athletics specifications

Coach's tip: Pair the form with a matching Gill toeboard (358 or 363) so your circle is meet-ready from day one. Care: Aluminum construction is corrosion-resistant; keep the circle surface swept clear of debris and standing water to preserve traction and extend service life.

Install a heavier-duty permanent throwing circle with the Gill Shot/Hammer Circle built from 2" x 2" extruded aluminum angle. The deeper angle profile gives this cast-in-concrete ring extra structural mass and edge definition, standing up to years of shot put and hammer competition while holding the precise regulation dimensions throwers depend on for legal, consistent footing.

Key features & specs

• Two sections of 2" x 2" extruded aluminum angle for a robust, deeper-profile permanent circle
• Designed to be cast into concrete for a durable, flush in-ground installation
• Heavier angle stock provides added structural mass and a well-defined circle edge
• Compatible with toeboards 358 and 363 to complete a shot put or hammer setup
• Meets NFHS, NCAA, and World Athletics specifications for competition-legal throwing
• Regulation dimensions for consistent, certified footing meet after meet

Coach's tip: level and align the circle precisely before pouring, as the installation is permanent once the concrete cures — a flush, true edge is critical for both safety and legal throws. Match it with the correct compatible toeboard for your event, and keep the aluminum rim clear of dirt and debris so throwers get clean, reliable traction.

Set a permanent, certified throwing circle into your throws area with the Gill Shot/Hammer Circle in extruded aluminum. Designed to be cast directly into concrete, this four-section angle-aluminum ring becomes a durable, maintenance-free part of your facility — delivering the exact regulation dimensions and clean rim edge that shot put and hammer throwers need for consistent, legal footing.

Key features & specs

• Four sections of 1" x 3/4" extruded aluminum angle for a lightweight, corrosion-resistant permanent circle
• Designed to be cast into concrete for a durable, flush, in-ground installation
• Discus-circle capable: the circle can also be surface-mounted for discus applications
• Compatible with toeboards 358 and 363 to complete a shot put or hammer setup
• Meets NFHS, NCAA, and World Athletics specifications for competition-legal throwing
• Regulation dimensions for consistent, certified footing

Coach's tip: position and level the circle carefully before the pour, since it becomes permanent once the concrete sets — a flush, true ring is essential for safe footing and legal throws. Pair it with the correct compatible toeboard for your event, and keep the aluminum rim clean and clear of grit so athletes get consistent traction at the front of the circle.

Build a competition-legal throwing circle that holds its shape for the life of your facility with the Gill Shot/Hammer Circle with cross bracing. Its two-section extruded-aluminum design with welded bracing bolts together into a rigid, true ring that resists the distortion cheaper circles suffer during in-ground installation — giving throwers a consistent, certified footing meet after meet.

Key features & specs

• Two sections of 1/4" x 3" extruded aluminum with welded bracing for maximum rigidity
• Bolts together to maintain true circular form during in-ground concrete installation
• Mounting hardware included for a complete, ready-to-set installation
• Compatible with toeboards 368 and 363 to complete a shot put or hammer setup
• Meets NFHS, NCAA, and World Athletics specifications
• World Athletics certified for sanctioned competition

Coach's tip: assemble and bolt the circle fully before the concrete pour so it locks in a perfectly round shape, and set it flush and level with the surrounding surface for safe footing. Pair it with the correct compatible toeboard for your event, and keep the aluminum clear of debris so throwers have clean, consistent traction.

Handcrafted in the USA, the OTE 90 Competition is the same javelin Jan Železný threw to achieve his 98.48m world record back in 1996 – a record that still stands today. Invented and perfected by Dick Held, the OTE 90 now sports a nostalgic look in honor of that legendary throw.

Protect your landing systems and the athletes who use them with the Gill Pit Stop base plate system. Pole vault and high jump pits shift under repeated landings and can slide dangerously toward standards or hard surfaces; the Pit Stop locks the base in place with a spiked, powder-coated steel plate — a simple, rugged safety addition that keeps your pit where it belongs, practice after practice.

Key features & specs

• 1/4" powder-coated steel plates for heavy-duty, corrosion-resistant durability under constant use
• 1/2" spikes on the base secure the plate to the surface and prevent the pit from shifting
• Pole Vault Pit Stop includes two base plates joined by a connector panel
• High Jump Pit Stop includes a single base plate
• Universally compatible with any pole vault or high jump pit
• Low-profile design anchors the pit without obstructing the landing area

Coach's tip: set the Pit Stop on firm, level ground and press the spikes fully in so the plate can't creep during a session, then reposition the pit over it and check alignment before athletes begin. Inspect the plates and spikes periodically for bends, and wipe them down and store dry in the off-season to preserve the powder coat.