Gill Athletics

The Gill Ote Adjustable Javelin Bag with Tubes is a rugged carry-and-storage solution that protects your throwers' javelins in transit and between practices. Built from heavy-duty Cordura nylon, the bag includes four protective tubes that shield the most vulnerable implements from dings and bends, and its universal, adjustable fit accommodates both 600g and 800g javelins so one bag serves your whole squad.

Key features & specs:

• Includes 4 protective tubes for the most valuable javelins
• Holds 5-7 javelins without tubing, or 4 javelins with tubing
• Heavy-duty Cordura nylon construction for durability
• Universal fit adjusts to hold both 600g and 800g javelins
• Designed for team transport to and from meets and practice

Coach's tip: Load the highest-value or competition javelins into the protective tubes and pack training implements around them. Wipe javelins dry before storing to prevent moisture buildup inside the bag, and hang or lay it flat so the shafts stay straight.

Gill Ninja Elite Pole Vault Grip Tape is the grip that lets vaulters hold lighter and grip tighter, even in wet or oily conditions. Engineered with thousands of tiny gripping "fingers," the tape delivers dependable purchase on the pole without chalk, sticky sprays, or other additives, so athletes get a clean, consistent grip and an easy release every time. It is a favorite for vaulters chasing higher heights who want confidence in their top hand through the plant and takeoff.

Key features & specs:

• Thousands of gripping fingers for a lighter hold with more security
• Performs in wet and oily conditions
• Slip-resistant with vibration-dampening properties
• Easy-release feel with no chalk or sticky spray required
• Roll size: 1" x 9'

Coach's tip: Wrap the tape smoothly over the pole's grip zone with slight tension and no overlap gaps for the best feel. Replace it once the fingers wear smooth, and store poles in a cool, dry rack to keep the grip surface tacky.

The Gill Sand Pit Perimeter Pad adds protective cushioning around the edges of the long jump and triple jump sand pit, reducing injury risk when athletes land near the perimeter or step onto the border during competition and practice. It is a straightforward, high-value upgrade that brings an existing sand pit up to current safety expectations without a full renovation, protecting jumpers at every skill level from the hard edges that frame the landing area.

Key features & specs:

• Cushions the hard perimeter edges of long jump and triple jump pits
• Designed to meet NFHS safety recommendations
• Durable construction built for repeated outdoor use and weather exposure
• Complements Gill's full line of jumping-event equipment
• Simple addition to improve safety on an existing pit

Coach's tip: Fit the padding snugly around the full perimeter and check the anchoring before each season. Brush off sand and let the pads dry before storage to protect the vinyl cover and keep the foam performing year after year.

The Gill Lap Counter Display Stand transforms the E49872 Electronic 2-Digit Display into a trackside lap counter for distance races, giving runners and spectators a clear, at-a-glance count of laps remaining. The stand raises the display to a readable height along the rail and includes a bell to signal the final lap, a time-honored track tradition that keeps athletes informed and races running on cue. It is the simplest way to add lap-counting capability to a display you already own.

Key features & specs:

• Converts the Gill E49872 Electronic 2-Digit Display into a lap counter
• Includes a bell to signal the final lap
• Elevates the display to a clear, trackside viewing height
• Designed to pair specifically with the E49872 display (sold separately)

Coach's tip: Position the stand on the home straight where runners pass it each lap, and assign an official to ring the bell as the leader begins the final lap. The E49872 display is required and sold separately; store both indoors between meets to protect the electronics.

The Gill Compact Wind Indicator is a safe, economical way to show athletes the relative strength and direction of the wind at the point of use during jumping events. A clear read on the wind helps long jumpers, triple jumpers, and pole vaulters time their approach and adjust their run, while giving coaches a simple visual reference for practice and competition. Its unintrusive, aesthetic design keeps it out of the way while still delivering the information athletes need.

Key features & specs:

• Compact, unintrusive design for jumping-event runways
• Shows relative wind strength and direction at the point of use
• Helps athletes stay safe and optimize their approach
• Economical alternative to electronic wind gauges for daily training
• Clean, aesthetic look suited to any facility

Coach's tip: Mount the indicator where jumpers can glance at it during their approach without breaking rhythm. Note that this is a visual training aid, not a certified wind gauge, so use an official anemometer for record-eligible marks. Store it indoors in the off-season to extend its life.

The Gill Portable Pole Rack is the convenient, secure way to store and protect vaulting poles during meets and practice. Free-standing and built from heavy-duty steel with a powder-coat finish, it keeps expensive poles organized, off the ground, and easy to grab between attempts. Individual rungs cradle each pole so they stay separated and protected from the nicks and scratches that come with piling poles on the infield.

Key features & specs:

• Free-standing heavy-duty steel frame
• Durable powder-coat finish for indoor and outdoor use
• Rungs hold each pole in place and allow quick, easy access
• Keeps poles organized, elevated, and protected at meets and practice
• Portable design moves easily from storage to the runway

Coach's tip: Load heavier training poles toward the base of the rack for stability and keep it on level ground during meets. Wipe the frame down and store it dry to preserve the powder coat and prevent rust over time.

The Gill International Finish Posts mark the finish line clearly and professionally for track meets, cross country events, and time trials. Built from heavy-duty steel with big, bold lettering, these posts make the finish unmistakable to athletes, officials, and timers from a distance. Wheeled, folded square bases let a single person roll them into position and lock them in place, so setup and teardown between events is quick and painless. Sold in pairs for a complete finish line.

Key features & specs:

• Heavy-duty steel construction for stability and long service life
• Folded square bases for a solid, tip-resistant footprint
• Wheeled bases for easy one-person mobility
• Big, bold "FINISH" lettering for clear visibility across the track
• Sold in pairs to flank both sides of the finish line

Coach's tip: Position the posts squarely on the finish line and align them with your timing equipment for accurate reads. Store them indoors or under cover between meets to protect the finish and keep the lettering crisp.

The Gill Box Collar Spike Plates Kit keeps your pole vault box collar locked in the correct position throughout competition and practice. The set of four tapped plates attaches at each bottom corner of the collar with hook-and-loop tabs, then anchors into the ground to stop the collar from creeping or slipping underneath the landing pit. It is an inexpensive but essential companion to any vault box collar, preserving both safety coverage and a clean plant area.

Key features & specs:

• Set of 4 tapped spike plates for each bottom corner of the collar
• Attaches with Velcro tabs for quick installation and removal
• Anchors the collar to prevent slipping under the pit
• Includes a pack of 100 3/8" pyramid spikes
• Accepts larger spikes if ground conditions require them

Coach's tip: Check the spike engagement before every meet, especially on soft or rain-soaked ground, and swap to longer spikes if the collar shifts. Store the plates and spikes with the collar so the setup stays complete.

The Gill SafetyMax+ Vault Box Collar adds a critical layer of protection to the pole vault plant area by padding the exposed hard surfaces around the vault box, one of the highest-risk points on the runway. Winged arms extend down into the box for added coverage, and the safety-yellow color clearly highlights the open area where vaulters plant the pole. It works with any style of pole vault landing system, making it a smart upgrade for any program.

Key features & specs:

• Pads exposed hard surfaces around the vault box for athlete protection
• Winged arms extend into the box for added coverage
• High-visibility safety-yellow color marks the plant area
• Complies with ASTM standard F2949
• Compatible with any style of pole vault landing system; Patent No. 8,444,531 B1

Coach's tip: Pair the collar with box collar spike plates to keep it anchored and prevent it from sliding under the pit. Wipe it down and store it dry in the off-season to preserve the padding and the bright safety color.

The Gill Moye Pedal Adapter converts any style Gill Fusion starting block from a conventional setup to a Moye pedal configuration in seconds. Simply remove the easy-carry handle from the front of the rail and insert the adapter. Many coaches and sprinters prefer the Moye start position because it allows closer positioning of the front foot to the starting line, and it is also well suited to 3-point and standing starts where competition rules allow.

Key features & specs:

• Converts conventional Gill Fusion blocks to a Moye pedal setup
• Tool-free installation: remove the front handle and insert the adapter
• Enables closer front-foot positioning to the starting line
• Recommended for 3-point and standing starts where allowed
• Patent 4,754,965; compatible only with Gill Fusion Blocks

Coach's tip: Confirm your blocks are Gill Fusion models before ordering, since the adapter fits only that rail. Keep the removed carry handle with the block's storage cart so you can switch configurations quickly at practice.

The Gill Steeplechase Water Jump Barrier Seal (Aluminum, SP configuration) is built for installations that call for a special profile at the water jump perimeter. Like the standard seal, it keeps the steeplechase water jump pit watertight, holding consistent depth for a safe, regulation competition surface for distance runners. The SP designation indicates a specialized configuration, so confirm compatibility with your specific water jump form before ordering.

Key features & specs:

• Aluminum construction for corrosion resistance and long service life
• SP (special-profile) configuration for non-standard water jump installations
• Seals the pit perimeter to maintain proper water depth
• Engineered for permanent outdoor track facilities
• Withstands repeated freeze-thaw cycles and heavy meet use

Coach's tip: Contact ST1 Sports with your water jump form model to verify the SP profile matches your installation. Inspect and clear the seal each season, and drain the pit before winter to protect the aluminum through freeze-thaw cycles.

The Gill Steeplechase Water Jump Barrier Seal is constructed from aluminum and designed for permanent installation to keep the water jump pit watertight between competitions. Fitted at the perimeter of the steeplechase water jump, the seal stops water from seeping out so the pit holds its proper depth for a consistent, safe competition surface. It is a foundational component of any regulation steeplechase course that plans to hold water reliably from meet to meet.

Key features & specs:

• Aluminum construction for lasting corrosion resistance
• Designed for permanent installation at the water jump perimeter
• Seals the pit to maintain proper, consistent water depth
• Built to withstand years of outdoor use and freeze-thaw cycles
• Suited to high school and collegiate steeplechase facilities

Coach's tip: Inspect the seal at the start of each outdoor season for gaps or debris, and clear the perimeter before filling. Draining the pit for winter helps the aluminum and seal survive repeated freeze-thaw cycles.

The Gill Weather Cover for the 66817 Pole Vault Pit is precision-fitted for the Gill 66817 model, delivering year-round protection from UV exposure, moisture, and airborne debris that degrade foam landing systems over time. For a pit that represents a five-figure investment, a purpose-built cover is a simple maintenance step that pays for itself many times over in extended equipment life and preserved landing performance.

Key features & specs:

• Built to exact 66817 specifications for complete, gap-free coverage
• Heavy-duty, weather-resistant material engineered for many outdoor seasons
• UV protection guards top pads and foam against sun damage
• Keeps rain, snow, and debris off the landing surface between meets

Coach's tip: Keep the pit covered whenever it is idle and clear standing water or snow before it pools in low spots. A water-shed insert underneath helps runoff, and drying the cover before folding prevents mildew and keeps the material flexible season after season.

The Gill Weather Cover for the 66517 Pole Vault Pit is cut to fit the Gill 66517 model precisely, shielding your landing system from sun, rain, and debris during storage between competitions and throughout the off-season. Using a fitted cover is the single most effective way to extend the service life of a pole vault pit, one of the largest line-item equipment costs in any track and field program, so this accessory pays for itself many times over in protected foam and preserved performance.

Key features & specs:

• Model-specific fit engineered for the Gill 66517 pole vault pit
• UV-resistant, weather-resistant material built for multiple outdoor seasons
• Full coverage with no gaps to keep moisture and debris off the landing surface
• Protects foam and top pads from sun damage and pooling water

Coach's tip: Cover the pit whenever it is not in use and brush off standing water or snow before it pools. Let the cover dry fully before folding for storage to prevent mildew and keep the material supple.

The Gill Weather Cover for the 66317 Pole Vault Pit provides a model-matched fit for the 66317 pit, protecting the foam landing system from the elements that cause the most damage: UV radiation, rain saturation, and windblown debris. A properly stored pit retains its cushioning and structural integrity far longer than one left exposed, making this cover an essential part of any facility's maintenance plan.

Key features & specs

• Model-matched to the Gill 66317 pole vault pit
• Shields foam from UV rays, rain, and windblown debris
• Weather-resistant material endures outdoor conditions without cracking or tearing
• Purpose-built to pair seamlessly with the 66317 model
• Protects the cushioning properties that keep vaulters safe

Maintenance tip: keep the pit covered any time it isn't in use to preserve the foam's cushioning. Clear debris and standing water before removing the cover, let both pieces dry before storing, and check the seams and tie-downs each season so it stays anchored on windy days.

The Gill Weather Cover for the 66217 Pole Vault Pit is model-matched to the 66217 pit precisely, delivering reliable protection from the UV degradation, moisture, and debris that break down foam landing systems over time. Keeping a proper cover on the pit whenever it's idle is one of the most important maintenance steps for extending the service life of a costly piece of equipment.

Key features & specs

• Model-matched to the Gill 66217 pole vault pit
• Protects against UV rays, moisture, and windblown debris
• Durable, weather-resistant material for multiple seasons of storage
• Purpose-built fit eliminates the gaps of improvised tarps
• A low-cost way to protect a major facility investment

Maintenance tip: cover the pit between practices and meets, not just over winter, to slow everyday foam aging. Brush off debris and drain water before removing it, dry both pit and cover before storage, and inspect the fasteners each season so the cover holds in wind.

The Gill Weather Cover for the 65817 Pole Vault Pit is purpose-built for the 65817 model, giving programs a precise, gap-free fit that protects the landing system from sun, rain, and debris whenever the pit is out of use. Because a pole vault pit is a long-term facility investment, proper storage under a fitted cover dramatically reduces the foam degradation caused by outdoor exposure.

Key features & specs

• Purpose-built for the Gill 65817 pole vault pit
• Precise fit protects against UV rays, rain, and windblown debris
• Holds up through multiple seasons without tearing or losing effectiveness
• Model-specific manufacturing ensures a secure, exact fit
• A smart, low-cost way to extend the life of an expensive pit

Maintenance tip: cover the pit between sessions, not just seasonally, to protect the foam from daily UV exposure. Clear debris and standing water before removing the cover, let both pieces dry before storage, and check the tie-downs each season so it stays secure in high wind.

The Gill Weather Cover for the 65417 Pole Vault Pit fits the 65417 model precisely, shielding the landing foam from the UV rays, rain, and debris that do the most damage between competitions and through the off-season. Pole vault pits are among the most expensive pieces of equipment in a track program, which makes a fitted cover one of the highest-return maintenance items you can buy.

Key features & specs

• Model-matched to the Gill 65417 pole vault pit for a precise fit
• Blocks UV degradation and moisture that break down foam
• Secure coverage that resists wind blow-off and water pooling
• Durable material engineered for multiple outdoor seasons
• Purpose-built alternative to universal tarps that leave gaps

Maintenance tip: keep the pit covered any time it's idle to slow everyday UV aging of the foam. Sweep off debris and drain standing water before removing the cover, dry both pieces before storage, and inspect the fasteners each season so the cover stays put on windy days.

The Gill Weather Cover for the 653 Pole Vault Pit is the purpose-built cover for the Gill Essentials Pole Vault Pit, protecting one of the largest equipment investments in your track program from the elements. Pole vault pit foam is highly susceptible to UV rays, rain, and debris, and a fitted cover is the simplest, most cost-effective way to keep the landing system performing season after season.

Key features & specs

• Sized specifically for the Gill Essentials Pole Vault Pit (19'9" x 20'2" x 26")
• Shields foam landing units from UV exposure, rain, and debris
• Model-matched fit stays secure and resists pooling and blow-off
• Weather-resistant material built for repeated outdoor seasons
• Available in Royal Blue only to match the Essentials pit

Maintenance tip: cover the pit whenever it isn't in active use, not just over the off-season, to get the most foam-saving benefit. Let the pit and cover dry before storing them together, clear off debris and standing water regularly, and check the seams and tie-downs so the cover stays anchored in wind.

The Gill Essentials Pole Vault Pit gives programs a fully high-school-compliant landing system at an economical price, including the recommended preferred landing zone that keeps vaulters safe at the point they need it most. In place of a traditional top pad, the Essentials system uses a skirted mesh top that draws the units together for a snug, stable fit, with a hook-and-loop box cut-out fastener to secure the area around the plant box.

Key features & specs

• Overall size: 19'9" x 20'2" x 26" (6.02m x 6.15m x 0.66m)
• Three base units (6'7" x 12'9" x 26") plus two front slant units (8'3" x 7'5" x 26")
• Skirted mesh top holds units together — no separate top pad required
• Hook-and-loop box cut-out fastener secures the plant-box area
• Meets all high school specifications, including the preferred landing zone
• Royal Blue only; backed by a five-year warranty

Coach's tip: pair the pit with the matching Gill weather cover and a compliant box collar for a complete, safe vault area. Keep the foam dry, spot-clean the vinyl and mesh with mild soap and water, and store covered to protect the units through the seasons.