-
Baseball
-
Softball
-
Basketball
-
Track & Field
-
- Track Meet – Certification Equipment
- Track Meet – Competitor Numbers
- Track Meet – Displays & Electronics
- Track Meet – Markers
- Track Meet – Measuring Equipment
- Track Meet – Officials Gear
- Track Meet – Start/Finish Equipment
- Track Meet – Timing & Stopwatches
- Track Meet – Cords & Cables
- Track Meet – Track Maintenance
-
Volleyball
Shop by Categories
-
Baseball
-
Softball
-
Basketball
-
Football
-
Lacrosse
-
Racket Sports
-
Soccer
-
Track & Field
-
Meet Management
- Track Meet – Certification Equipment
- Track Meet – Competitor Numbers
- Track Meet – Displays & Electronics
- Track Meet – Markers
- Track Meet – Measuring Equipment
- Track Meet – Officials Gear
- Track Meet – Start/Finish Equipment
- Track Meet – Timing & Stopwatches
- Track Meet – Cords & Cables
- Track Meet – Track Maintenance
-
Volleyball
-
Wrestling
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Vendor |
Vendor - __ |
| Weight |
Weight - __ |
| Materials |
Materials - __ |
| Color |
Color - __ |
| Accessory size |
Accessory size - __ |
| Size |
Size - __ |
|
|
Compare products ( / )
Products
4094 products
4094 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
$564.95
The Gill Sand Pit Leveler levels a long jump or triple jump pit quickly and precisely, replacing back-breaking hand raking with a single smooth pass. The 10-foot steel bar spans the pit and glides across on adjustable guides, leaving a flat, competition-ready surface in seconds so officials can reset between jumps and keep the event moving. It is a facility upgrade that saves labor and improves consistency at every meet.
Key features & specs:
- 10' long steel leveler flattens the pit in one pass
- Two 40" long wired handles for two-person operation
- Adjustable guides glide the leveler smoothly across the pit
- Powder-coated in architectural gray for corrosion resistance
- Eliminates slow, uneven hand raking
Coach's tip: Set the guide height so the bar just skims the pit rim for a flat, even surface, and pull it in one steady pass. Rinse off clinging sand and store the leveler dry to protect the powder coat and keep it sliding smoothly.
$264.95
The Gill Sand Pit Perimeter Pad adds protective cushioning around the edges of the long jump and triple jump sand pit, reducing injury risk when athletes land near the perimeter or step onto the border during competition and practice. It is a straightforward, high-value upgrade that brings an existing sand pit up to current safety expectations without a full renovation, protecting jumpers at every skill level from the hard edges that frame the landing area.
Key features & specs:
- Cushions the hard perimeter edges of long jump and triple jump pits
- Designed to meet NFHS safety recommendations
- Durable construction built for repeated outdoor use and weather exposure
- Complements Gill's full line of jumping-event equipment
- Simple addition to improve safety on an existing pit
Coach's tip: Fit the padding snugly around the full perimeter and check the anchoring before each season. Brush off sand and let the pads dry before storage to protect the vinyl cover and keep the foam performing year after year.
$54.95
Weighing round throwing implements on a flat scale platform is a balancing act — literally. The Gill Scale Ring (3D Printed) solves that problem with a simple, precision-made ring that cradles shots and weights on the scale so they sit still while officials record the reading. No more chasing a rolling shot put across the check-in table or second-guessing an unsteady weigh-in.
Key features & specs:
- Purpose-built ring keeps round implements steady and centered on the scale during weigh-in
- 3D-printed for a consistent, repeatable fit
- Lightweight and easy to place on or remove from the scale platform
- Pairs with Gill implement scales for faster, more reliable certification
A small but valuable accessory for meet officials and throws coaches who want quick, accurate weigh-ins without fumbling with unstable implements. Store it with your certification kit so it's always on hand at check-in, and wipe it clean of chalk and grit to keep implements seating flush on the ring.
From $59.95
Mark distances clearly and pack up fast with Gill Scholastic Distance Markers (Set of 13). These ultra-light expanded-vinyl markers are built for the jumps and throws runway or field, giving athletes and officials a clean visual reference that stacks flat and carries with ease between events.
Key features & specs:
- Set of 13 distance markers
- Ultra-light expanded-vinyl construction
- 13" x 16" footprint stacks neatly for quick transport
- Bold 11" number height for easy reading from a distance
- Ideal for marking distances at jumps and throws events
- Lightweight enough to reposition quickly as the competition progresses
- Great for practice, dual meets, and large invitationals alike
Coach's tip: Lay the markers out before the event so athletes can gauge their steps and officials can spot marks quickly during competition. Place them just outside the landing area or sector line where they're visible but out of the way. Stack and store them flat indoors to keep the vinyl from curling and the numbers legible season after season.
$16.95
Moving shots around the throwing venue shouldn't slow your program down. The Gill Scholastic Shot Carrier gives athletes and coaches a simple, rugged way to transport a competition or practice shot put from the equipment room to the ring and back — no more juggling a heavy iron ball by hand or risking a dropped implement on the walk out to the sector.
Key features & specs:
- Built from heavy woven polyethylene rope for long-lasting strength and abrasion resistance
- Comfortable molded plastic handle for a secure, no-slip grip
- Holds one shot put — ideal for individual athletes and quick event turnarounds
- Lightweight, packable design stores easily in a throws bag or equipment cart
- Color may vary
A smart, low-cost addition to any high school or club throws program — keep one in every athlete's kit so shots stay off the ground and out of the dirt. To keep it in top shape, wipe the rope and handle clean after muddy or wet meets and let it air dry fully before storing.
$364.95
The Gill Shot Circle (Aluminum) is a lightweight, corrosion-resistant throwing ring that mounts on top of an existing concrete surface to establish a legal shot put circle. Its extruded aluminum angle construction won't rust, making it an easy-maintenance choice for outdoor throwing areas that see year-round weather.
Key features & specs:
- Construction: Three sections of 1" x 3/4" extruded aluminum angle
- Installation: Designed to mount on top of a concrete surface; anchor bolts included
- Toeboard compatibility: Works with the 359 and 364 toeboards
- Compliance: Meets NFHS specifications
- Model: GP-372
Coach's tip: Pair this surface-mount circle with a level-pad toeboard (359 or 364) so the components sit flush and legal together. Install on a flat, cured concrete pad with all included anchors, and check the bolts each preseason so the ring stays tight under repeated throws.
$474.95
The Gill Shot Circle (Steel, 4-Piece) is a heavy-duty throwing ring built to mount on top of an existing concrete surface for a legal, durable shot put circle. Its powder-coated steel sections deliver the rugged, long-lasting performance outdoor facilities need, standing up to weather and the daily pounding of throws practice.
Key features & specs:
- Construction: Four sections of 1/4" x 1-1/2" flat powder-coated steel
- Installation: Designed to mount on top of a concrete surface; anchor bolts included
- Toeboard compatibility: Works with the 359 and 364 toeboards
- Compliance: Meets NFHS specifications
- Model: GP-373
Coach's tip: Install on a level, cured concrete pad and anchor every section so the ring stays flush and stable under a thrower's push. Pair it with a matching level-pad toeboard (359 or 364), and touch up any chips in the powder coat each season to keep the steel rust-free outdoors.
$769.95
The Gill Shot Toeboard (Aluminum, Depressed Pad) is the premium, competition-grade stop board for shot put circles, cast from durable aluminum for a rigid, long-lasting contact edge. Designed for a 3/4" depressed surface and IAAF certified, it's the choice for programs and facilities that host sanctioned meets and want a toeboard that meets the highest specifications.
Key features & specs:
- Material: Cast aluminum for maximum rigidity and durability
- Fit: Designed for a 3/4" depressed pad surface
- Compatibility: Works with 366, 369, and 374 shot circles and the 3741 form
- Compliance: Meets NFHS, NCAA, and World Athletics specifications; IAAF certified
- Model: GP-363
Coach's tip: Confirm your circle uses a depressed (3/4") pad before ordering so the aluminum board seats flush and legal. Check the anchoring before each session, and wipe the board down after wet meets — aluminum won't rot, but keeping it clean protects the painted contact surface throwers rely on.
$769.95
The Gill Shot Toeboard (Aluminum, Level Pad) is the surface-mount version of Gill's premium cast-aluminum stop board, built for shot put circles installed flush with the surrounding surface. Its rigid aluminum construction delivers a durable, regulation contact edge that stands up to years of competition and practice throws.
Key features & specs:
- Material: Cast aluminum for rigidity and long service life
- Fit: Designed for surface-mount (level pad) shot circles
- Compatibility: Works with the 372 and 373 shot circles
- Compliance: Meets NFHS specifications
- Model: GP-364
Coach's tip: Match this level-pad board to surface-mount 372/373 circles — not depressed installs — so it sits flush and legal. Verify the anchoring before every session for safe, foul-accurate throws, and wipe the board clean after wet meets to protect the painted contact edge.
$473.95
The Gill Shot Toeboard (Synthetic, Depressed Pad) gives shot put circles a durable, competition-legal stop board that holds up to repeated contact from the shot and the thrower's foot. Molded from low-density polyethylene for a 3/4" depressed surface, it's built to meet the specifications officials require while resisting the cracking and chipping that shortens the life of lesser toeboards.
Key features & specs:
- Material: Molded low-density polyethylene with a 1/4" wall thickness
- Fit: Designed for a 3/4" depressed pad surface
- Compatibility: Works with 366, 369, and 374 shot circles and the 3741 form
- Compliance: Meets NFHS, NCAA, and World Athletics specifications
- Model: GP-358
Coach's tip: Confirm your circle type and pad depth (depressed vs. level) before ordering so the toeboard seats flush and legal. Check that it's securely anchored before each session — a loose toeboard is both a foul-line and a safety issue — and store synthetic boards out of prolonged sun to keep the material from getting brittle.
$473.95
The Gill Shot Toeboard (Synthetic, Level Pad) is the surface-mount version of Gill's durable polyethylene stop board, built for shot put circles installed flush with the surrounding pad. Molded from low-density polyethylene, it delivers the reliable, regulation-legal contact edge throwers need while standing up to season after season of hard use.
Key features & specs:
- Material: Molded low-density polyethylene
- Fit: Designed for surface-mount (level pad) shot circles
- Compatibility: Works with the 372 aluminum and 373 steel shot circles
- Compliance: Meets NFHS specifications
- Model: GP-359
Coach's tip: Match the toeboard to your circle type — this level-pad version pairs with surface-mount 372 and 373 circles, not depressed installs. Confirm it's anchored flush and secure before every session so throws stay legal and safe, and store it out of prolonged sun to protect the synthetic material.
$4,620.00
The Gill Shot/Hammer Circle Form in aluminum gives throws programs a permanent, competition-legal foundation for shot put and hammer events. Designed for in-ground installation, the four-section form bolts together into a perfectly true circle and serves as the mold for a smooth, crack-resistant concrete pour — delivering the consistent, level throwing surface athletes and officials expect at sanctioned meets. Once set, it becomes a fixed part of your facility that will handle years of daily practice and competition without shifting or degrading.
Key features & specs
- Four sections of 2" x 3" aluminum angle that bolt together to form the circle
- Built for permanent in-ground installation
- Aluminum exterior bracing creates a strong, rigid frame that holds shape during the pour
- Open center allows a smooth concrete pour and a crack-resistant finished surface
- Inner circle constructed of 1/4" x 3" flat aluminum bar
- Compatible with Gill toeboards 358 and 363
- Meets NFHS, NCAA, and World Athletics specifications
Coach's tip: Pair the form with a matching Gill toeboard (358 or 363) so your circle is meet-ready from day one. Care: Aluminum construction is corrosion-resistant; keep the circle surface swept clear of debris and standing water to preserve traction and extend service life.
$382.95
Set a permanent, certified throwing circle into your throws area with the Gill Shot/Hammer Circle in extruded aluminum. Designed to be cast directly into concrete, this four-section angle-aluminum ring becomes a durable, maintenance-free part of your facility — delivering the exact regulation dimensions and clean rim edge that shot put and hammer throwers need for consistent, legal footing.
Key features & specs
- Four sections of 1" x 3/4" extruded aluminum angle for a lightweight, corrosion-resistant permanent circle
- Designed to be cast into concrete for a durable, flush, in-ground installation
- Discus-circle capable: the circle can also be surface-mounted for discus applications
- Compatible with toeboards 358 and 363 to complete a shot put or hammer setup
- Meets NFHS, NCAA, and World Athletics specifications for competition-legal throwing
- Regulation dimensions for consistent, certified footing
Coach's tip: position and level the circle carefully before the pour, since it becomes permanent once the concrete sets — a flush, true ring is essential for safe footing and legal throws. Pair it with the correct compatible toeboard for your event, and keep the aluminum rim clean and clear of grit so athletes get consistent traction at the front of the circle.
$909.95
Install a heavier-duty permanent throwing circle with the Gill Shot/Hammer Circle built from 2" x 2" extruded aluminum angle. The deeper angle profile gives this cast-in-concrete ring extra structural mass and edge definition, standing up to years of shot put and hammer competition while holding the precise regulation dimensions throwers depend on for legal, consistent footing.
Key features & specs
- Two sections of 2" x 2" extruded aluminum angle for a robust, deeper-profile permanent circle
- Designed to be cast into concrete for a durable, flush in-ground installation
- Heavier angle stock provides added structural mass and a well-defined circle edge
- Compatible with toeboards 358 and 363 to complete a shot put or hammer setup
- Meets NFHS, NCAA, and World Athletics specifications for competition-legal throwing
- Regulation dimensions for consistent, certified footing meet after meet
Coach's tip: level and align the circle precisely before pouring, as the installation is permanent once the concrete cures — a flush, true edge is critical for both safety and legal throws. Match it with the correct compatible toeboard for your event, and keep the aluminum rim clear of dirt and debris so throwers get clean, reliable traction.
$1,100.00
Build a competition-legal throwing circle that holds its shape for the life of your facility with the Gill Shot/Hammer Circle with cross bracing. Its two-section extruded-aluminum design with welded bracing bolts together into a rigid, true ring that resists the distortion cheaper circles suffer during in-ground installation — giving throwers a consistent, certified footing meet after meet.
Key features & specs
- Two sections of 1/4" x 3" extruded aluminum with welded bracing for maximum rigidity
- Bolts together to maintain true circular form during in-ground concrete installation
- Mounting hardware included for a complete, ready-to-set installation
- Compatible with toeboards 368 and 363 to complete a shot put or hammer setup
- Meets NFHS, NCAA, and World Athletics specifications
- World Athletics certified for sanctioned competition
Coach's tip: assemble and bolt the circle fully before the concrete pour so it locks in a perfectly round shape, and set it flush and level with the surrounding surface for safe footing. Pair it with the correct compatible toeboard for your event, and keep the aluminum clear of debris so throwers have clean, consistent traction.
$2,830.00
The Gill Sloped AGX M4 PV Standard Base Pads are engineered specifically for Gill's AGX M4 pole vault standards, delivering a precise, purpose-built fit that generic pads can't match. Their sloped profile is contoured to the AGX M4 base geometry, cushioning the standard bases so vaulters and poles are protected from hard contact during vaults and dismounts. For programs running AGX M4 standards, these are the correct, competition-ready base pads to complete a safe pole vault setup.
Key features & specs
- Designed specifically for Gill AGX M4 Pole Vault Standards
- Sloped profile contoured to the AGX M4 base for a precise fit
- Protects vaulters from impact with the standard bases
- Also shields poles from base contact during use
- Sold in pairs (one per standard)
Coach's tip: Match your base pads to your exact standard model — AGX M4 pads are shaped for that base and won't seat correctly on other standards. Care: Wipe clean, dry fully before storing, and check for wear or compression each season so the pads continue to cushion as designed.
$3,350.00
The Gill Sloped Manual AGX PV Standard Base Pads are purpose-built for Gill's AGX M2 manual pole vault standards, giving your program a precise-fit safety component instead of a generic one-size compromise. The sloped profile is contoured to the AGX M2 base so the pads seat correctly and cushion the standard bases, protecting vaulters from hard contact and shielding poles from impact during vaults and dismounts. For any facility running AGX M2 standards, these are the matched base pads that complete a safe, competition-ready pole vault setup.
Key features & specs
- Designed specifically for Gill AGX M2 (manual) Pole Vault Standards
- Sloped profile contoured to the AGX M2 base for a precise fit
- Protects vaulters from impact with the standard bases
- Also shields poles from base contact during use
- Sold in pairs (one per standard)
Coach's tip: Confirm you're running AGX M2 manual standards before ordering — pads are shaped per standard model and won't seat correctly on a different base. Care: Wipe clean, dry fully before storage, and inspect for compression or tears each season so the pads keep cushioning as intended.
$2,720.00
The Gill Sloped Pole Vault Standard Base Pads are a mandatory safety component for any compliant pole vault installation, wrapping the exposed base uprights of the standard system in protective padding. The sloped profile is the key: it lets athletes land on and around the standards without striking sharp corners or hard edges, reducing injury risk in the busiest, highest-traffic zone of the vault area.
Key features & specs
- Designed specifically for the Gill 61617C pole vault standard system
- Sloped profile eliminates sharp corners and hard edges at the base
- Protects both athletes and the standard structure during landings
- Precision-fit for seamless integration with compatible standards
- Helps meet safety requirements at high school and collegiate facilities
Facility tip: inspect the pads at the start of every season and replace any with compressed foam or torn covers, since worn padding no longer provides compliant protection. Wipe the covers down with mild soap and water, let them dry fully before storage, and keep them out of prolonged direct sun when the runway is idle to extend cover life.
$1,070.00
Keep the throws circle organized and safe with the Gill Soft Shot Stop. These foam-filled barriers ring the landing sector to stop shots, discuses, and hammers from rolling out of the marked area — speeding up implement retrieval and protecting athletes and officials working the field.
Key features & specs:
- Prevents implements from rolling past the throw sector
- Shock-absorbing foam-filled barriers wrapped in customizable 19oz vinyl
- Non-slip material on the bottom creates traction to keep barriers in place
- Hook-and-loop straps link barriers together so they function as one unit
- Each barrier measures 6' L x 23" W x 23" H
- Available in 14 colors with optional custom graphics
- Sector coverage scales by length (e.g., 16m/52' uses 6 units; 24m/79' uses 9)
Coach's tip: Match the number of units to your sector length using the coverage chart so there are no gaps at the edges. Wipe the vinyl clean, let barriers dry, and store indoors to protect the foam and finish between meets.
$244.95
The Gill Spike Kit is a complete, organized assortment of track spikes plus the wrench to install them, giving coaches everything needed to keep a whole roster's spike plates race-ready. A wide variety of spike types and lengths covers different surfaces and conditions, and the included storage case, configurable to as many as 13 compartments, keeps every spike size sorted and easy to find on meet day.
Key features & specs:
- Assortment of pyramid and needle spikes in multiple lengths (1/8", 3/16", 1/4", 3/8")
- Includes a T-handle spike wrench for installation and removal
- Extra dividers configure the case for up to 13 compartments
- Gill storage case measures 14-1/4" x 9-3/4" x 2-1/4"
- Everything needed to service a full roster's spikes
Coach's tip: Match spike length to the surface, shorter pyramids for hard tracks, needles for softer or all-weather surfaces, and keep the case sorted by size for fast changes. Replace worn or missing spikes before meets, and keep the wrench in the case so it's always on hand.
From $15.95
Keep a full roster of sprinters and jumpers race-ready with Gill track spikes in bulk 100-count packs. Buying by the hundred is how coaches and equipment managers stay ahead of the constant attrition of spikes lost to the track, worn flat over a season, or swapped out to match a surface.
Pyramid spikes are the all-purpose choice, biting into most all-weather and synthetic surfaces with a stable, predictable grip. Needle spikes taper to a finer point for tracks that call for a narrower profile and reduced surface damage.
Length matters as much as shape. Shorter 1/8" and 3/16" spikes suit hard, modern all-weather surfaces and are required by many facilities that restrict spike length. Mid-range 1/4" is the most widely used competition length. Longer 3/8" and 5/8" spikes are built for softer surfaces, cross country, and field-event runways where deeper penetration helps.
Always confirm your facility's spike-length rules before competition — many tracks cap length at 1/4".
- 100 spikes per pack
- Available in 1/8", 3/16", 1/4", 3/8", and 5/8" lengths
- Pyramid and needle profiles
- Fits standard threaded spike plates
$24.95
Gill Sports Chalk gives athletes the non-slip grip they need to perform with confidence across track and field events. From gripping the bar in pole vault to securing an implement in the throws, a light coat of chalk cuts moisture and sweat for a surer hold at the critical moment. Packaged in a convenient 1 lb box, it is an inexpensive, everyday essential that belongs in every event bag and equipment cart.
Key features & specs:
- Ensures a reliable, non-slip grip
- Cuts moisture and sweat for a surer hold
- Useful across pole vault, throws, and other grip-dependent events
- Convenient 1 lb box
- Affordable staple for team equipment carts
Coach's tip: Apply a light, even coat rather than caking it on, which actually reduces grip. Keep the box sealed and dry between uses so the chalk stays fine and clump-free, and store it away from your pole grips and finished surfaces to keep them clean.
$224.95
The Gill Stainless Steel Shot is a precision competition implement built for consistency throw after throw. Machine-turned to an exact shape and weight, it delivers the balanced feel serious throwers rely on when every centimeter counts — and its stainless construction resists the rust and pitting that shorten the life of lesser shots left out in the elements. For high school and collegiate programs, it's a durable, meet-ready choice that holds its specifications season after season.
Key features & specs
- Machine-turned precision — Turned for an exact, consistent shape and weight on every implement
- Stainless steel construction — Resists corrosion and surface wear for a long service life
- This model — 12 lb, 103 mm diameter
- Meets specifications — Conforms to NFHS, NCAA, and World Athletics standards
- Certified sizes — The 4K/109 mm and 16 lb/129 mm shots are World Athletics Certified
Coach's tip: Keep a size range on hand so athletes train and compete with the exact implement weight their division requires. Care: Wipe clean and dry after wet-weather use and store indoors to preserve the finish and protect the throwing surface.
$15.95
The Gill Starter's Sleeve keeps the race starter clearly visible to timers and officials from anywhere on the track. Its bright orange fabric stands out against any background, and elastic at both ends gives it a sure, comfortable fit over the starter's arm — a simple, essential piece of meet-management gear for clean, well-coordinated starts.
Key features & specs:
- Visibility: Bright orange, highly visible from any part of the track
- Fit: Elastic at both ends for a sure fit
- Use: Worn on the starter's arm to signal starts clearly to timers
- Best for: Track meet starters and meet-management crews
- Model: GP-423
Coach's tip: Have the starter wear the sleeve on the arm that raises the starting device so hand-timers get a clear visual cue at the gun. Keep one in the meet-management kit, and wash it as needed so the high-visibility orange stays bright season after season.
$63.95
Gill Starting Blanks are the .22 caliber crimped blanks that produce the sharp, clear report track starters rely on for fair, clean race starts. Sold in boxes of 100 rounds, they give a meet a full supply of reliable rounds for use with a standard .22 caliber starter's pistol — the dependable consumable behind every well-timed start.
Key features & specs:
- Caliber: .22 caliber, crimped blanks
- Quantity: 100 rounds per box
- Use: For standard .22 caliber starter's pistols
- Function: Produce the sharp report needed for fair, audible starts
- Model: GP-42701
Coach's tip: Store blanks in a cool, dry, secured location per your school's policies, and keep them separate from the starter's pistol when not in use. Bring more than you think you'll need on meet day — a full schedule of heats and finals goes through rounds faster than expected.
$139.95
Gill Starting Blanks in .32 caliber deliver the loud, sharp report that makes for fair, clean starts at larger track meets and outdoor venues where extra volume matters. Sold in boxes of 100 rounds, they give a program a full season's supply of reliable, crimped blanks for use with a standard .32 caliber starter's pistol — dependable ignition and consistent sound, round after round.
Key features & specs:
- Caliber: .32 caliber, crimped blanks
- Quantity: 100 rounds per box
- Use: For standard .32 caliber starter's pistols
- Function: Produce a sharp, loud report for fair, audible race starts
- Compliance/Model: Manufactured to the standards required for NFHS-sanctioned competition; GP-42801
Coach's tip: The .32 caliber round is louder than a .22 — a good fit for big outdoor meets where the whole field needs to hear the start. Store blanks in a cool, dry, secured location per your school's policies, keep them separate from the pistol when not in use, and stock extra before championship season.
$143.95
Measure the throws and jumps with confidence using the Gill Steel Measuring Tape (330' / 100M, Open Reel). Built for the demands of track & field, this long-format steel tape delivers the accuracy officials need to record marks correctly across the shot, discus, javelin, hammer, and horizontal jumps.
Key features & specs:
- Long 330' / 100M length for full-field throws and jumps measurement
- Durable steel tape blade coated with an epoxy finish for wear resistance
- Zero line at the end of the ring for accurate, repeatable measurements
- Open-reel design for fast winding and payout
- Also offered in closed-reel 50' (15m) and 100' (30m) and open-reel 300' (90m) formats
Coach's tip: Keep the blade straight and taut along the ground when recording a mark, and wind the reel slowly to avoid kinks. Wipe the tape down and let it dry before reeling it in fully so the epoxy finish and blade stay in top condition.
$3,740.00
The Gill Steel Shot Cage provides a safe, compliant enclosure for shot put practice and competition, protecting athletes, coaches, and spectators from errant throws. Built with powder-coated A513 steel poles and weather-treated nylon netting, it's engineered for durability through years of heavy outdoor use, and hinged net arms plus ground sleeves keep the structure stable and the netting properly positioned throughout competition.
Key features & specs:
- A513 powder-coated steel poles for durability
- Weather-treated Nylon 6 net with 180 lb break strength
- Net height of 13'6" for effective containment
- 18" hinged net arms secure the net at the front two poles; ground stakes at the back
- 20" deep ground sleeves; 5-year warranty
Coach's tip: Confirm the hinged arms are latched and the net is taut before any athlete enters the ring, and point the opening away from other event areas. Inspect the netting each season and replace worn sections promptly to keep the cage safe and competition-legal.
Showing 1680/4094
Best sellers You’ll Love
Related Collections
Products
Join the ST1 Sports Community
Get early access to sales, new arrivals, and weekly gear guides - straight to your inbox.
- Choosing a selection results in a full page refresh.
- Opens in a new window.