Products

For schools that value safety, the Gill Athletics HALO® Starting Device's international patent pending ring design reduces the concern of guns at the track. Unlike traditional starting pistols that require costly blanks, the HALO® device is an electronic system that can connect wirelessly to the Wireless Speaker System and produce both the traditional bang sound and an audible tone. Connect to the Multiple Speaker System to disperse sound above the decibel standard equally across the starting line.

• Unique ring design reduces the concern of guns on school campuses
• 12 total LED lights that wrap around both sides of the device so that the hand-timers can see the flash clearly from afar
• Sounds either a tone or bang sound when used with the Wireless Speaker System. Tested to meet the >90db requirement to start a track meet when used with this speaker system
• Features an audio jack for compatibility with existing speaker systems that have an aux input. However, please note that if used with another speaker system, it is not guarnateed to meet the >90db requirement
• Batteries are a less expensive solution compared to blanks
• Wireless option available to eliminate cable cord stretching around the track to the official
• Compatible with FinishLynx®, Eagle Eye and Flash Timing systems
• Powered by one 9V battery, included
• Includes:
  • Halo Device
  • Protective Soft Carrying Case
  • Audio Cable
  • Timing System Cable
  • 9V Battery
  • Phillips Head Screwdriver

The Gill Hammer Conversion Circle lets a facility turn an existing discus ring into a legal hammer ring in seconds — no permanent construction required. Its seven interlocking PVC sections drop into place to adapt a standard circle to exact hammer specifications, making it the practical solution for schools that share a single throwing area across multiple events.

Key features & specs:

• Design: Seven interlocking sections of durable white PVC plastic
• Function: Converts a discus ring into a regulation hammer ring
• Setup: Portable; installs in seconds with no permanent fixtures
• Compliance: Meets NFHS, NCAA, and World Athletics specifications; IAAF certified
• Model: GP-3622

Coach's tip: Seat all seven sections fully so the ring sits flush and continuous before any throw, and pair it with a single-circle hammer cage for safe practice. Store the sections stacked and out of prolonged sun, and count them back in after each session so the set stays complete.

Certifying hammers at check-in has always meant kneeling on the ground with a vertical gauge — the Gill Hammer Length Gauge ends that. Its horizontal design lets officials measure hammer length at a comfortable working height, speeding up weigh-in and taking the strain off backs and knees during long meets. Every hammer gets verified quickly and accurately, so your competition stays on schedule and on spec.

Key features & specs:

• Aluminum gauge constructed horizontally for ergonomic use — no bending to the ground
• Toggle Clamp pulls and straightens the wire to capture true overall length
• Hammer Read-Out Tool precisely captures the measured length
• 3-piece unit breaks down for convenient transport and storage
• Built for repeated use at the certification table throughout a meet

A must-have for meet officials and throws coaches certifying hammers at sanctioned competitions. Store the three sections together in your certification kit, keep the clamp and read-out mechanism clean and free of grit, and check calibration at the start of each season so your measurements stay reliable.

This Gill Handle and Harness Kit restores throwing performance to your 20 lb Orbiter weight-throw implement by replacing the worn or damaged handle and harness assembly. The weight throw puts tremendous load on the handle and connecting harness, and swapping in a fresh kit returns the implement to safe, competition-ready condition without the cost of buying a whole new weight — keeping your throwers training on properly balanced gear.

Key features & specs:

• Replacement handle and harness kit engineered for Gill 20 lb Orbiter throwing weights
• Restores a secure grip and reliable connection point for the weight-throw event
• Direct-fit components matched to the Orbiter implement design
• Returns worn implements to safe, competition-ready condition
• Cost-effective repair that extends the service life of your throwing weights

Coach's tip: Inspect handle and harness hardware regularly during the throws season — a stretched or frayed harness is a safety hazard under full rotational load, so replace it at the first sign of wear. Care: Wipe down after use, store the implement indoors, and keep the handle assembly free of grit and moisture to maximize its lifespan.

The Gill Hardshell Javelin Tube gives coaches peace of mind when transporting valuable javelins to and from competition. Its rigid ABS plastic shell guards against the impacts, bends, and rough handling that can ruin a precision implement, while a removable shoulder strap makes it easy to carry a full set across a busy meet infield. The universal, adjustable design fits the full range of school and club javelins, protecting your throwers' most important gear.

Key features & specs:

• Rigid ABS plastic shell for maximum transport protection
• Holds 5-7 javelins
• Universal fit adjusts between 600g and 800g javelins
• Removable shoulder strap included for easy carrying
• Overall length 89 1/4"

Coach's tip: Nest the javelins tip-to-tail to fit the full set and keep points protected inside the shell. Dry each implement before loading to prevent corrosion, and store the tube horizontally so the shafts stay true. Product appearance may vary from the image shown.

The Gill Heavy Duty Soccer Goal Anchor Bag is a simple, essential piece of safety equipment that keeps portable soccer goals firmly planted on any playing surface. Unanchored goals are a serious tip-over hazard, and these bags provide the counter-balance needed to hold a goal in place on grass, turf, or hard courts where in-ground stakes aren't an option. You supply the fill — up to 50 lbs of sand per bag — making them affordable to ship and easy to store when not in use.

Key features & specs

• Anchors portable soccer goals on virtually any surface
• Holds up to 50 lbs of user-supplied sand per bag
• Rests on the rear base frame of the goal for maximum counter-balance
• Best positioned in the back corners of the goal
• Heavy-duty construction built for repeated seasonal use

Safety tip: always anchor both rear corners before allowing play, and never let athletes climb or hang on a goal even when anchored. Empty the bags for off-season storage, keep them dry to prevent mildew, and inspect the seams and handles for wear before each season.

The Gill High Jump Standard Base Pads add an important layer of safety to the high jump area by cushioning the exposed bases of the standards, where athletes can make incidental contact as they clear the bar and land. Each pad wraps the base in dense foam encased in bright yellow vinyl, both softening impact and clearly marking the standard for jumpers and officials. Sold in pairs so both standards are protected for a complete, compliant setup.

Key features & specs:

• 19" x 19" x 2" thick foam pad for impact protection
• Encased in high-visibility yellow vinyl
• Cushions the exposed high jump standard bases
• Bright color improves visibility for athletes and officials
• Sold in pairs for both standards

Coach's tip: Seat the pads firmly around each standard base and check placement before every session, since bases shift during setup. Wipe them down and store them dry in the off-season to protect the vinyl and keep the foam resilient for years of use.

The Gill High School Take-Off Board Installation Tray is the recessed foundation that holds a take-off board flush and stable within the runway surface — critical for both athlete safety and competition compliance. Designed for the Gill 441TS system, it ensures the board sits at exactly the correct height and alignment, simplifying installation and reducing the need for custom concrete work.

Key features & specs:

• Function: Recessed mounting tray that holds the take-off board flush in the runway
• Compatibility: Designed for the Gill 441TS system
• Benefit: Keeps the board at the correct height and alignment for legal, safe jumps
• Installation: Simplifies setup and minimizes custom concrete work
• Model: GP-442

Coach's tip: Set the tray perfectly level and flush with the runway during installation — a legal, safe take-off depends on it. Pair it with the matching 441TS board assembly, and keep the tray clear of sand and debris so boards seat cleanly during changeovers.

Give your finish-line camera exactly what it needs with Gill Hip Numbers (#1–9, Sets of 25). Applied to each athlete's hip, these high-visibility labels let photo-finish systems and place judges identify runners instantly as they cross the line — a must-have for any fully-automatic-timing meet.

Key features & specs:

• Designed for photo-finish timing identification
• Bold 3" digit printed on a 4" x 3" label for clear camera visibility
• No-residue adhesive labels peel off cleanly after the race
• Each set includes 25 of the selected number
• Single digits #1 through #9 available to build any hip-number sequence
• Works hand-in-hand with your FAT (fully automatic timing) system and place judges

Coach's tip: Apply the hip number to the athlete's right hip facing the finish camera so the timing crew can read it on every image, and press firmly along the whole label so no edge lifts mid-race. Assign numbers by lane or seed before the meet to speed check-in. Keep the labels in a cool, dry spot beforehand so the adhesive stays fresh and presses on cleanly.

The Gill Horizontal Distance Indicator Boards give everyone at your long jump and triple jump pit an instant read on how far each athlete has jumped. Placed along the side of the sand pit, they provide a quick visual gauge of distance for spectators, coaches, and athletes alike — adding energy to competition and giving jumpers immediate feedback between attempts. Made from safe, collapsible plastic rather than rigid metal, they significantly reduce injury risk if an athlete contacts them, while staying lightweight and durable enough for years of meet-day use.

Key features & specs:

• Marked in English units covering the 16'-30' jump range
• Positioned along the side of the sand pit for at-a-glance distance reference
• Safe, collapsible plastic construction — safer than rigid metal boards on contact
• Lightweight and durable for easy setup, pickup, and storage
• Custom graphic options available for an additional cost and lead time

Coach's tip: Set the boards in order along the pit before warm-ups so athletes get consistent distance feedback all meet long. Because they collapse, they stack compactly for storage — keep them out of direct sun long-term to protect the plastic and any custom graphics.

The Gill Horizontal Distance Indicator Boards are the professional standard for pit-side distance visualization at long jump and triple jump competitions. Placed along the full length of the sand pit, they eliminate the guesswork between jumps — giving athletes immediate feedback on distance and giving coaches and spectators a clear, real-time gauge of performance without waiting for official measurement.

• Pit-Side Distance Visualization — Boards are positioned along the side of the sand pit at measured distance intervals, providing an instant visual reference for jump distance that athletes can read from the runway and coaches can track from the sideline during both practice and competition
• Safe Collapsible Plastic Construction — Made from lightweight, collapsible plastic rather than rigid metal, significantly reducing the injury risk to athletes who may contact the boards during landing or approach — a meaningful safety advantage over traditional metal indicator board systems used at older facilities
• Lightweight and Easy to Handle — Plastic construction keeps each board light and manageable, making setup, removal, and storage between events fast and straightforward for facility and meet management crews without requiring tools or heavy lifting
• Durable for Outdoor Competition Use — Built to handle the outdoor exposure, UV light, and physical contact that pit-side equipment faces during high-volume competition seasons without cracking, fading, or losing structural integrity across years of regular meet use
• Custom Graphic Options Available — Gill offers custom graphic printing on the indicator boards for programs that want to add school logos, team colors, or facility branding to the pit area — available at additional cost with lead time; a graphic worksheet is available for planning artwork submissions
• Compatible with Gill Long Jump and Triple Jump Installations — Designed to complement Gill's full horizontal jumps product lineup including sand pit forms, take-off board systems, and laser measuring equipment, integrating cleanly into a complete Gill-equipped horizontal jumps facility setup

The Gill HS Portable Discus Cage gives high school programs a regulation, fully portable discus enclosure that sets up and removes as needed. Six aluminum net poles support the containment netting, and a wheeled steel base rolls into position and weights down with the included jugs, so a crew can stage a safe, NFHS-compliant discus competition on any suitable field without a permanent build.

Key features & specs:

• Designed for setup and removal as needed
• Six 6063-T6 aluminum net poles
• #504 knotless nylon netting with 180 lb break strength
• A500 Grade B steel base with wheels; weighted with sand or water
• Five 5-gallon jugs with gray vinyl covers included
• Meets NFHS specifications; 5-year warranty

Coach's tip: Fill every ballast jug before use so the base holds firm during throws, and confirm net tension and pole seating before the first athlete enters. Inspect the netting each season and replace worn sections promptly to keep the cage compliant.

The Gill HS Steel Discus Cage delivers a safe, NFHS-compliant discus enclosure built to stand up to years of high school competition and practice. Powder-coated white steel poles with a rolled offset design keep athletes safer around the structure, and the containment netting rises to a full 13'6" to catch errant throws. It's a durable, cost-effective choice for programs building or upgrading a compliant discus throwing area.

Key features & specs:

• Powder-coated white 2.5" square A513 steel poles
• Rolled offset pole design for added safety
• Netting with 180 lb break strength; 13'6" net height
• Meets NFHS specifications
• 5-year warranty

Coach's tip: Confirm net tension and pole seating before each session so the cage contains throws reliably, and position it so the sector opening points away from other event areas. Inspect the netting each season and replace worn sections promptly to keep the cage NFHS-legal. Point the sector opening away from runways and spectator areas so the enclosure does its job during multi-event meets.

Make implement check-in fast and airtight with the Gill HS/NCAA/World Athletics Javelin Certification Kit. This official-friendly, self-contained kit gives you the gauges and scale to confirm that every implement meets specification — with labeled tabs and laser-cut gauges that make finding the right check quick and the readings dependable.

Key features & specs:

• Self-contained certification kit; includes a scale plus size gauges
• Checks specifications for the discus, javelin, shot put, and hammer (by model)
• Labeled tabs help officials quickly find the correct-sized gauge
• Horizontally designed, ergonomic hammer gauge
• Laser-cut gauges and labels for extreme accuracy and permanency
• Model options: 93051 High School, 93066 High School Javelin, 93075 NCAA, 93080 World Athletics

Coach's tip: Match the kit model to the level you host so you have gauges for every weight class you'll certify. Keep the kit closed in its case and stored indoors to protect the laser-cut gauges and preserve their accuracy meet after meet.

The Gill 41" Hurdle Cart – 18–20 capacity is designed for track and field programs that operate at scale — handling the full complement of hurdles needed for a complete race setup in one trip. The walk-in design eliminates the awkward stacking and unstacking process that wastes practice time, while the swivel caster configuration makes navigating gym floors, hallways, and infield surfaces straightforward for a single operator.

• • 18–20 Hurdle Capacity – The largest configuration in Gill's hurdle cart lineup, holding a full set of 18 to 20 hurdles in a single cart — eliminating multiple trips across the facility and dramatically reducing the time coaches and athletes spend on hurdle setup and breakdown before and after practice
  • Unique Walk-In Design – Open walk-in frame allows hurdles to be loaded and unloaded by simply walking them in and out of the cart structure without complex stacking, tilting, or mechanical loading, making the process fast and manageable for one person
  • All-Steel Powder-Coated Construction – Heavy-gauge steel frame with a durable black powder coat finish provides the structural rigidity to handle the combined weight of 18–20 hurdles without flexing or deforming, while the powder coat protects against rust and surface wear through years of daily facility use
  • Large Swivel Casters – Oversized swivel casters allow the fully loaded cart to turn, maneuver, and navigate tight spaces with minimal effort, making it practical to push a full load of hurdles across the infield, through hallways, and into storage areas without requiring multiple operators
  • Compatible with Rocker and "L" Style Hurdles – Designed to accommodate both rocker-base and "L" shaped hurdle styles, making it compatible with Gill's full range of track hurdles as well as most other brands' standard hurdle configurations used at the high school and collegiate level
  • 41" Width Configuration – Sized at 41" to match the standard width of collegiate and high school track hurdles, ensuring a proper fit and secure hold during transport without hurdles shifting or tipping inside the cart during movement

The Gill 41" Hurdle Cart (8–10 capacity) takes the hassle out of moving and storing hurdles so coaches spend practice time coaching, not hauling. Its unique walk-in design lets a single person load and unload hurdles by simply walking them in and out of the frame — no awkward stacking, tilting, or lifting. Built for daily track program use, it rolls easily from storage to the infield and back, keeping your hurdle inventory organized and protected between sessions.

Key features & specs

• Unique walk-in design for fast, one-person loading and unloading
• Holds 8–10 hurdles (this 41" model; also offered in a 35" height)
• Heavy-duty steel construction with a durable black powder-coat finish
• Large swivel casters for smooth, easy transport across gym floors, hallways, and infield surfaces
• Compatible with both rocker-style and 'L'-style hurdles

Coach's tip: Stage the loaded cart at the start of your hurdle lane so athletes can grab and reset hurdles quickly during interval work. Care: The powder-coat finish resists rust; wipe down after wet-weather use and check caster hardware periodically to keep rolling smooth.

The Gill Hurdle Flight Cart is engineered to be the most convenient and efficient way to move a full set of hurdles across your facility. Its standout four-wheel design tracks straight and corners cleanly — a real upgrade over three-wheel carts that tend to cut corners and tip under load. Load up to ten hurdles and roll them from storage to the track in a single trip, saving setup time before practice and cleanup time after.

Key features & specs

• Four-wheel design delivers superior maneuverability versus corner-cutting three-wheel carts
• Efficiently supports up to 10 hurdles at a time
• Sturdy steel construction built for daily program use
• Durable black powder-coat finish resists rust and wear
• Designed for smooth transport across gym floors, hallways, and infield surfaces

Coach's tip: Load hurdles in race order so athletes can pull and set them down the lane without re-sorting — it streamlines interval workouts. Care: Wipe down after wet-weather use to protect the powder coat, and periodically check wheel hardware to keep it rolling true.

The Gill Hurdle Gateboard is a direct replacement board that keeps your hurdles safe, legal, and competition-ready when the original gateboard cracks or wears out. Rather than replacing an entire hurdle, coaches and athletic directors can swap in a fresh gateboard and extend the life of their existing inventory — a smart, budget-friendly move for programs managing a full set of hurdles across a season.

Key features & specs:

• Construction: Durable Lexan (polycarbonate) gateboard built to withstand repeated impact
• Size: 41" hollow board with 4 mounting holes
• Compatibility: 41" replacement gateboard fits the Gill S1, S2, S4, and G4 hurdles
• Note: Mounting hardware not included
• Related boards: 41" ribbed board fits G6/Continuum; 47" ribbed board fits G4/G6/Continuum hurdles

Coach's tip: Inspect gateboards during preseason equipment checks and replace any that are cracked or faded to keep hurdles impact-safe. Wipe clean with mild soap and water; avoid abrasive cleaners that can scratch the Lexan surface.

The Gill Impact Tent Weight Bags are the essential anchoring accessory for any Gill Impact Tent used on hard surfaces where ground stakes can't be driven in. Four bags — one per leg — add significant ballast to the tent frame, keeping the canopy stable and safely in position during meets, sideline setups, and outdoor events.

• Set of 4 — One Per Tent Leg — Complete set of four weight bags covers all four corners of the Gill Impact Tent frame, providing balanced, symmetrical ballast across the full structure for stable, even anchoring on any hard or soft surface
• Holds Up to 25 lbs Per Bag — Each bag accepts up to 25 lbs of sand, gravel, rocks, or any locally available fill material — sand not included — allowing meet crews to fill on-site with available materials rather than transporting pre-weighted bags to every event location
• Hook-and-Loop Leg Strap Attachment — Each bag features a durable hook-and-loop strap that wraps securely around the Gill Impact Tent leg without tools, keeping the bag firmly positioned throughout the event and releasing quickly when the tent needs to be broken down and packed
• Hard Surface and High-Wind Solution — Designed specifically for outdoor setups on asphalt, concrete, track surfaces, and any hard surface where ground stakes cannot penetrate — provides the holding power needed to keep the canopy stable in conditions up to the tent's recommended wind threshold
• Durable Weather-Resistant Construction — Built from durable material that withstands outdoor exposure, fill material abrasion, and repeated seasonal use without tearing, seam failure, or strap degradation through years of meet-day and event use
• Recommended Companion to Stake Kit — Gill recommends using weight bags alongside the included stake kit for maximum stability in variable outdoor conditions — weight bags handle hard surfaces while stakes secure the tent on grass and dirt surfaces at outdoor track and field facilities

• Commercial grade gray-blue steel frame • 600 denier polyester canopy and walls are scuff resistant and waterproof finish. • Water, UV light, and fire resistant • Tent stake kit and dust coverbag included • Sidewalls and roller bags sold separately • Specify color with order. Available in White, Black, Gray, Navy Blue, Royal Blue, Kelly Green, Forest Green, Orange, Burgundy and Red Portable Tent With One-color Imprint • Features one color custom imprint across canopy valance; 10”x100” print area • Canopy available in 10 colors; 600 denier polyester scuff resistant and waterproof finish. • Commercial Grade Steel Frame with hammer tone finish. Premium Portable Tent With Full-Color Printing • Features full color digital dye sublimated print on all locations of canopy • Canopy available in 10 colors; 600 denier polyester scuff resistant and waterproof finish. • Industrial Grade Steel Frame with aluminum brush finish. This canopy is NOT to be left unattended as it is considered a temporary shelter! If there is inclement weather, you should take your canopy down immediately. Any rain and winds over 10-15 MPH will damage your canopy. Water that collects on the canopy top will also destroy the structure of your canopy. We advise you to never leave your canopy up overnight and unattended under inclement weather conditions. We will not be held responsible for ANY weather damages. It is to the customers best judgment in determining the best weather conditions for your canopy. Manufacturer's Warranty

Give your team a durable home base at every outdoor event with the Gill Impact Tent (10' x 10', Black Canopy). Built on a commercial-grade steel frame with a tough, waterproof canopy, it sets up as a reliable shade and shelter station for athletes, coaches, and gear on meet day.

Key features & specs:

• 10' x 10' footprint
• Canopy available in White or Black
• 600-denier polyester canopy with a scuff-resistant, waterproof finish
• Commercial-grade steel frame with a hammer-tone finish

Important: This canopy is a temporary shelter and should not be left unattended. Take it down immediately in inclement weather — rain, pooling water, or winds over 10–15 MPH can damage the structure. Never leave it up overnight or unattended in poor conditions; weather damage is not covered.

Coach's tip: Assign a crew to strike the tent the moment conditions turn, and always clear standing water from the canopy top. Dry the canopy fully before packing it away to prevent mildew and protect the finish for next season.

Throws programs accumulate a lot of heavy metal, and the Gill Implement Cart; Combo keeps all of it organized in one rolling unit. Designed to carry shots, discs, and hammers together, this combo cart moves your entire throwing inventory from the storage room to the practice field or competition sector without multiple trips or scattered implements.

Key features & specs:

• Holds up to 44 implements — a mix of discuses, shots, and hammers
• Sturdy steel construction with a durable black powder-coat finish
• Combo design accommodates all three standard throwing implements in one cart
• Keeps heavy implements organized, contained, and easy to inventory
• Implements not included

Ideal for high school and collegiate throws coaches managing a full complement of shots, discs, and hammers across a busy season. Wipe the frame clean after wet or muddy sessions to protect the finish, keep implements dry to prevent rust, and store the cart indoors to extend its service life.

Keep your throwers sharp through the winter with the Gill Indoor Rubber Discus. Engineered specifically for indoor training, its solid one-piece rubber body won't scuff gym floors or mark walls, so athletes can drill full spins and releases inside without damaging your facility. At the 1K weight, it's ideal for developing throwers and younger athletes building technique in the off-season, giving your program a safe, floor-friendly way to train discus year-round no matter the weather outside. When the season turns and reps matter most, it keeps your throwers progressing indoors.

Key features & specs

• Solid one-piece construction for long-lasting durability
• Non-marking design won't scuff gym floors or walls
• 1 kilogram (1K) training weight for developing and youth throwers
• Meets NFHS specifications
• Purpose-built for indoor off-season practice

Coach's tip: set up a netted throwing lane or throw into a padded wall so athletes can rep releases safely indoors. Care: wipe clean after use, store in a dry equipment room, and inspect periodically for surface wear to keep it floor-safe.