Products

Extend the life of your landing system with the Blazer Cover Insert for Water Protection. Placed beneath your weather cover, this insert helps shed water off the top of the pit so moisture doesn't pool and soak into the foam — a simple, inexpensive way to protect your investment and keep your pit dry between sessions.

Key features & specs:

• Helps shed water off the weather cover to extend pit life
• Ends are capped with rubber tips to protect the top pad of the pit
• Simple to place and remove during weather-cover setup
• Durable build for repeated seasonal use
• Dimensions 34" x 34" x 4" (14 lbs)

A smart, low-cost accessory for programs protecting a high jump or pole vault landing system from weather damage. Position the insert under your weather cover so it channels water off the pit, and check that the rubber end caps stay in place to protect the top pad. Store it dry between uses so it's ready to protect your pit season after season.

The Blazer Cross Country Complete Kit gives a coach the core course-management gear needed to lay out, mark, and run a cross country meet or training course in one convenient package. Instead of piecing together flags, markers, and course hardware from different sources, this kit bundles the essentials so a program can set a clean, well-defined course quickly and consistently, meet after meet and season after season.

• All-in-one cross country course-marking bundle for meets and training
• Blazer competition-grade components built for repeated outdoor use
• Speeds course setup and teardown versus sourcing pieces separately
• Ideal for high school and youth programs hosting or training on their own courses
• Confirm the exact included components for your course needs before ordering

Coach's tip: confirm exactly what the kit includes against your course layout — number of flags, markers, and any directional hardware — before ordering so you're not short on race day. Store the components together, clean and dry, so the kit is meet-ready every season.

Get dependable stability and full-range adjustability with the Blazer Deluxe Aluminum High Jump Standard. A sturdy steel 16" square base anchors a lightweight, powder-coated upright, giving officials a stable, easy-to-set standard that covers every height from youth through elite competition — with an included wheel kit for easy transport.

Key features & specs:

• Adjusts from 2'3" to 8'6", marked in 1/2" increments
• Heights marked in both English and metric
• Steel 16" square low-profile base for uniform stability
• Powder-coated upright with a 3"-wide lower section; wheel kit included
• Sold in pairs

A stable, versatile standard for high school and collegiate high jump programs. Set the crossbar height to match each athlete and roll the standards into position with the included wheel kit, leveling them on the runway before competition. Wipe them down after wet meets and store them indoors so the base, upright, and hardware stay accurate and competition-ready for years.

Stock your high jump venue and save with the Blazer Deluxe Fiberglass High Jump Crossbar — Set of 3. Blazer's finest crossbar, in a value three-pack, gives your program the backups it needs for meets and practice — with the same double-matte pultruded construction preferred and used by many world-class competitors.

Key features & specs:

• Set of 3 Deluxe Fiberglass high jump crossbars — a money-saving bundle
• Double-matte pultruded fiberglass for consistent flex and durability
• Meets Collegiate, International, and High School Federation specs
• Preferred and used by many world-class competitors
• Length 13'1-1/2" each

A smart, cost-effective buy for high jump programs that want spares on hand for meets and daily practice. Set each bar evenly on the standard pegs and handle them carefully to avoid nicks and cracks. Store the crossbars flat and fully supported along their length in a dry space to prevent bowing, so they stay true and competition-ready season after season.

Set the bar with the best: the Blazer Deluxe Fiberglass High Jump Crossbar is the company's finest crossbar, preferred and used by many world-class competitors. Its double-matte pultruded construction delivers the consistent flex, balance, and durability serious high jumpers demand — meeting Collegiate, International, and High School Federation specifications.

Key features & specs:

• Double-matte pultruded fiberglass construction for consistent performance
• Meets Collegiate, International, and High School Federation specs
• Preferred and used by many world-class competitors
• Length 13'1-1/2"
• Available individually — or save with the Set of 3

A premium, competition-grade crossbar for high jump programs at every level. Set it evenly on the standard pegs before each attempt, and handle it carefully to avoid nicks and cracks that affect performance. Store the crossbar flat and fully supported along its length in a dry space to prevent bowing, so it stays true and competition-ready season after season.

The Blazer Deluxe Fiberglass Pole Vault Crossbar is the company's finest bar — engineered to deliver the consistent feel and competition-legal performance that vaulters and meet directors rely on. Its round, one-piece fiberglass construction uses double matte pultruded winding for a bar that's exceptionally lightweight yet resists the flex and warp that throw off a vault. The result is a true, predictable crossbar that sits cleanly on the standards and holds its shape season after season.

Key features & specs

• Round, one-piece fiberglass construction — one of the lightest on the market
• Double matte pultruded build with wound fiberglass fibers for strength and consistency
• Meets Collegiate, International, and High School Federation specifications
• Length: 14'10"; weight approximately 8 lbs
• Available individually or as a money-saving set of 3

Note: ships freight only; inspect for visible and concealed damage before accepting delivery, as crossbars are not guaranteed against breakage. Best for: high school and collegiate pole vault programs. Care: store horizontally on supports at multiple points to prevent bowing between uses.

Keep your vault runway stocked with the Blazer Deluxe Fiberglass Pole Vault Crossbar — Set of 3. Blazer's finest crossbar, in a value three-pack, gives your vault program the backups it needs across meets and practice — built with the same double-matte pultruded construction preferred and used by many world-class competitors.

Key features & specs:

• Set of 3 Deluxe Fiberglass pole vault crossbars — a money-saving bundle
• Double-matte pultruded fiberglass for consistent flex and durability
• Meets Collegiate, International, and High School Federation specs
• Preferred and used by many world-class competitors
• Length 14'10" each (pole vault length)

A cost-effective buy for pole vault programs that want spare bars ready for meets and daily practice. Set each bar evenly on the standard pins and handle them carefully to avoid nicks and cracks that affect performance. Store the crossbars flat and fully supported along their length in a dry space to prevent bowing, so they stay true and competition-ready season after season.

Verify throwing implements quickly and accurately with the Blazer Digital Implement Scale. With a 55 lb capacity and a clear digital readout, it lets officials and coaches weigh shots, discs, hammers, and weights at the certification table — a compact, dependable tool for keeping every implement within spec.

Key features & specs:

• 55 lb weighing capacity for all standard throwing implements
• Patented detachable display and keypad for flexible positioning
• Programmable auto-off and backlight features
• Includes a multi-sized holder and extendable bracket for versatile weighing
• Powered by 4 "C" cell batteries or an AC adapter (neither included); 9 lbs

A practical certification tool for meet officials and throws coaches who need to confirm implement weights on site. Place the scale on a flat, stable surface, zero it before weighing, and use the detachable display for an easy read. Remove the batteries during long off-season storage, keep the scale clean and dry, and store it in your certification kit so it's ready for every meet.

Define a regulation throwing circle with the Blazer Discus Ring. Built from sturdy aluminum angle in easy-to-handle sections, it installs into your discus area with anchor holes for a secure, permanent circle — meeting IAAF, NCAA, and NFHS rules so your throws area is competition-ready at every level.

Key features & specs:

• 1" x 3/4" x 1/4" aluminum angle construction
• Ships in 4 sections for easier handling and installation
• Anchor holes provided for secure ground mounting
• Regulation 8'2-1/2" ring diameter
• Meets IAAF, NCAA, and NFHS rules (14 lbs)

A durable, rules-compliant circle for high school and collegiate throws programs building or upgrading a discus venue. Assemble the four sections and anchor the ring flush with the throwing surface per competition specs, confirming it's level and secure before use. Keep the ring clear of debris and inspect the anchors periodically so your discus circle stays safe and competition-ready for years.

Groove the spin without the coach hovering over every rep: the Blazer Discus Trainer is the perfect tool for teaching rotational technique in the discus and shot put. Durable yet lightweight and easy to move, it lets athletes get high-quality reps on their own — freeing coaches to work with other events while throwers build muscle memory.

Key features & specs:

• Trains spin technique for both discus and shot put
• Durable but lightweight and easy to move around
• Designed for solo use — athletes get reps without constant supervision
• Adjustable to fit any athlete
• Used at the collegiate, high school, and middle school levels

A versatile training aid for throws coaches developing technique across a full squad and every skill level. Set it up for repeated rotational reps so athletes can self-train while you coach other groups, and adjust it to fit each thrower. Wipe it down after use and store it in a dry space so it's ready for the next practice session.

The Blazer Double Ended Max Pole Vault Pit is a competition-grade pole vault landing system designed for programs that vault from both directions. Its double-ended configuration lets athletes approach and land safely regardless of runway orientation, while Blazer's proven foam-and-cover construction delivers the soft, controlled landings serious high school and college vault programs demand meet after meet.

Key features & specs:

• Weather-ready 18-oz. vinyl-coated, breathable nylon cover
• High-performance foam fill with internal construction for even, cushioned landings across the whole pit
• Double-ended layout with standard/box cutouts configured for both approach directions
• Front pads and buns help cover the standards and box-collar area for added safety
• Built-in handles and secure connections keep units locked tightly together
• Meets high school and college federation standards; weather cover included

Coach's tip: confirm the exact pit dimensions and box-collar configuration against your facility and current NFHS/NCAA minimum-size rules before ordering, and keep the pit covered and dry in the off-season to protect the foam and cover.

The Blazer Double Ended Olympic Pole Vault Pit combines Olympic-level landing coverage with a double-ended design for facilities that vault from both directions. Built to championship spec with Blazer's proven foam-and-cover construction, it delivers the maximum coverage and soft, controlled landings elite vault programs require, whichever way the runway runs.

Key features & specs:

• Weather-ready 18-oz. vinyl-coated, breathable nylon cover
• High-performance foam fill with internal construction for even, cushioned landings across the whole pit
• Double-ended, Olympic-size layout with standard/box cutouts for both approach directions
• Front pads and buns help cover the standards and box-collar area for added safety
• Built-in handles and secure connections keep units locked tightly together
• Meets high school and college federation standards; weather cover included

Coach's tip: confirm the exact pit dimensions and box-collar configuration against your facility and current NFHS/NCAA minimum-size rules before ordering, and keep the pit covered and dry in the off-season to protect the foam and cover.

Keep your hurdles competition-ready with the Blazer Drilled Replacement Hurdle Board. When a board cracks, splinters, or wears out, this drilled, double-ribbed plastic replacement drops right onto your existing Blazer hurdle base — restoring the hurdle to full function without the cost of buying a whole new unit.

Key features & specs:

• Double-ribbed plastic board for strength and durability
• Pre-drilled to mount directly onto a Blazer hurdle base
• Direct-fit replacement for damaged or worn boards
• Dimensions 41" x 3" x 1" (1.6 lbs)
• A cost-effective repair versus replacing the full hurdle

A smart, budget-friendly fix for track programs maintaining their hurdle fleet. Remove the damaged board and bolt the drilled replacement onto your existing Blazer base, confirming it's fastened securely before use. Inspect your hurdle boards periodically for cracks and keep a few replacements on hand so a worn board never sidelines a hurdle at practice or a meet.

Dial in any footwork drill with the Blazer Dual Agility Ladder with Flat Adjustable Rungs. This 30-foot ladder splits into two 15-foot sections that can also connect back together, and its flat, adjustable rungs let coaches set the exact spacing each drill demands — a versatile speed and agility tool for athletes in every sport.

Key features & specs:

• 30' ladder that splits into two 15' ladders (and reconnects)
• Flat rungs adjust the distance between rungs to your needs
• D-rings on the open ends of the webbing for anchoring or connecting
• Carrying bag included
• Lightweight at 8 lbs for easy transport

A flexible, affordable training tool for coaches building speed, quickness, and coordination across any sport. Lay the ladder flat and anchor the ends with the D-rings, set the rung spacing to match your drill, and run athletes through footwork patterns. Roll it up into the included bag after use and store it dry so it's always ready for the next practice.

Both athletes run together — the back-runner holds back the front-runner, then they quickly spin around and switch roles running the other way. A 10' long strap with large 3" wide loops at each end.

• Weight: 1 lb
• Dimensions: 6 × 6 × 6 in
• Model: #4014

Part of the Blazer speed-development line alongside the Duo Overspeed Harness, Leap Frog, and Bullet Belt.

Overspeed training is a fantastic technique to increase speed. The Blazer Duo Overspeed Harness uses a 20' safety-sleeve elastic that stretches to three times its length (to 60') — with the waist-belt end hooked to another runner or an anchored object, it pulls you faster than your top running speed, and doubles for drills like leap-frog jumping. Adjustable harness fits Small–XXL.

Safety Sleeve Elastic (patent pending) protects your athlete and yourself. Limits maximum safe stretch distance. If the elastic breaks, it coils inside the sleeve to prevent injury, and the sleeve itself protects the elastic from road/track wear and UV exposure.

• UPS shippable, 3 lbs
• Weight: 4 lbs
• Dimensions: 13 × 10 × 4 in

Coach's tip: pair this with Blazer's other speed-development tools — Dual Pull, Leap Frog, and the Bullet Belt line — for a full resisted/assisted-running station.

Launch a high jump program in one purchase with the Blazer Elementary High Jump Package. This complete value bundle pairs an appropriately sized elementary landing system with everything a young program needs to start jumping right away — standards, a crossbar, and a weather cover to protect the whole setup between sessions.

Key features & specs:

• #1251 Elementary Pit (12' x 6' x 24")
• #1251WC Weather Cover to protect the pit from the elements
• #1215 Steel High Jump Standards (one pair)
• #1511 Deluxe Fiberglass Crossbar
• Choose base, top, and weather-cover colors to match your program

An ideal, cost-effective package for elementary and youth programs building a high jump venue from scratch. Assemble the system on level ground per Blazer's instructions, keep the weather cover on the pit whenever it's not in use to protect the foam from moisture and UV, and inspect the pad and cover each season so your landing system stays safe and ready for years of young jumpers.

The Blazer Elementary High Jump Pit is a right-sized, entry-level landing system built for elementary and youth track programs teaching the fundamentals of the high jump. This one-piece unit is easy to move, set up, and store, giving younger athletes a soft, confidence-building place to land as they learn proper takeoff and clearance technique. It's designed specifically for elementary-level use rather than competition, keeping the footprint and cost manageable for schools and youth programs.

Key features & specs:

• Overall size: 12'W x 6'L x 24"H
• One-piece unit with no separate top pad — simple, all-in-one construction
• Recommended for elementary-level practice and instruction
• Manageable footprint that's easy to position, move, and store
• Choice of base colors: Red, Lt. Gold, Orange, Royal, Navy, Forest, Maroon, Purple, Gray and Black

Coach's tip: pair the pit with standards and a crossbar sized for your athletes, and always position it on level ground with the landing area fully covered. Store the pit indoors and keep the cover clean and dry to extend its life.

Set the bar at any height with the Blazer Elite Aluminum High Jump Standard. Its lightweight aluminum build and low-profile 16" square base deliver uniform stability across the full competition range, while an included wheel kit makes moving the standards on and off the runway quick and easy — a premium, portable choice for programs at every level.

Key features & specs:

• Adjusts from 2'3" to 8'6", marked in 1/2" increments
• Heights marked in both English and metric
• Aluminum 16" square low-profile base for uniform stability
• Powder-coated upright with a 3"-wide lower section; wheel kit included
• Sold in pairs

A durable, portable standard for high school and collegiate high jump programs. Set the crossbar height to match each athlete and roll the standards into position using the included wheel kit, leveling them on the runway before competition. Wipe them down after wet meets and store them indoors so the aluminum and hardware stay accurate and competition-ready for years.

Haul heavy loads across the infield with the Blazer Equipment Wagon. Its heavy-gauge steel-mesh bed and towable design let coaches and grounds crews move hurdles, implements, cones, and gear in bulk — turning multiple equipment trips into one, before and after every practice and meet.

Key features & specs:

• Heavy-gauge steel-mesh bed with fold-down sides for easy loading
• Towable design for moving big loads efficiently
• Pneumatic 13" wheels roll smoothly over grass and rough terrain
• 6.0 cu. ft. capacity with a 1,000 lb weight limit
• Bed dimensions 44.9"L x 23.2"W x 25.9"H (78 lbs)

A rugged workhorse for track programs and grounds crews that move gear all season. Distribute heavy loads evenly and secure long items before towing, keep the tires properly inflated for the smoothest ride, and rinse off mud and store the wagon under cover to protect the steel bed and extend its working life for years.

Give your shot put circle a lightweight, weather-tough stop board with the Blazer Fiberglass Toe Board. Molded to conform to official rules, its weather-resistant, colorfast fiberglass build stands up to the elements and repeated impact — with tie-downs on each end so it stays firmly secured through every throw.

Key features & specs:

• Molded fiberglass conforms to official competition rules
• Weather-resistant and colorfast for lasting outdoor use
• Tie-downs provided on each end for secure anchoring
• Lightweight yet durable under repeated shot put impact
• Dimensions 53" x 14" x 6" (10 lbs)

A practical, rules-compliant toe board for high school and collegiate throws programs. Secure it at the front of your shot put circle using the end tie-downs before each meet, and confirm it's firmly anchored and undamaged before use. Wipe it clean of grit after sessions and store it in a dry space between seasons so it stays competition-ready for years.

The Blazer Flag Kit is a set of high-visibility linesman flags built for officials working the sideline at track, football, soccer, and other field events. Each flag pairs a bright red nylon panel with an aluminum handle and a comfortable rubber grip, so officials can signal clearly and confidently through a full day of competition.

• Set of 4 flags with carrying bag included
• Flag panels: 15" × 15" red nylon
• Handles: aluminum with rubber grips
• Model: #4912
• Durable construction for repeated outdoor use

Coach's tip: the four-flag set with the carry bag is enough to outfit a full sideline crew. Only need a couple of flags? See the Blazer Set of 2 Linesman Flags (no bag). Let the nylon dry before packing it away so the panels stay bright and mildew-free.

Take the fear out of learning to hurdle with the Blazer Foam Adjustable Hurdle in scarlet. Built entirely from soft, forgiving foam, it lets developing athletes drill proper technique and rhythm without the sting of a hard hurdle strike — while four height settings let it grow with your athletes from novice to advanced.

Key features & specs:

• Adjusts to four heights: 30", 33", 36", and 39"
• Made of durable 18-oz vinyl-coated nylon over foam
• Double Velcro strips hold each height setting securely in place
• Velcro-attached nylon cover for easy maintenance
• Soft foam build prevents bruising and builds confidence

An excellent teaching tool for track coaches introducing athletes to the hurdles. Set the height to match each athlete's level and progress upward as technique improves, and use it for rhythm and trail-leg drills where confidence matters most. Wipe the cover clean and store the hurdle in a dry space to keep the foam and vinyl in top shape.

Build confident hurdlers and prevent painful contact with the Blazer Foam Hurdle Guard. This soft foam guard slips right over the top of your hurdle gate, cushioning the strike zone so athletes learning proper technique can attack the hurdle without fear of bruising a trail leg or lead knee.

Key features & specs:

• Soft foam construction cushions the top of the hurdle gate
• Slips on and off easily — no tools required
• Helps prevent bruising from hurdle contact
• Builds athlete confidence during technique work
• An affordable safety add-on for any hurdle program

An ideal, low-cost training aid for track coaches teaching hurdle mechanics to developing athletes. Slip a guard over each practice hurdle before technique sessions so athletes can focus on form without hesitation, remove them for competition, and store them with your hurdles in a dry space so they're always ready for the next practice.

Teach flawless hurdle technique even when you can't be everywhere at once with the Blazer Form Finder Hurdle Trainer. This self-training device guides hurdlers into correct body position — keeping arm movement tight and bringing the trail leg up under the armpit — so athletes drill proper form on their own while you coach other events.

Key features & specs:

• Forces the hurdler into correct body position automatically
• Keeps arm movement in and draws the trail leg under the armpit
• Cloth cross-brace is Velcro-attached and breaks away safely on contact
• Steel powder-coated uprights for durability
• Dimensions 38" x 18" x 2" (30 lbs)

An invaluable teaching tool for track coaches developing hurdle technique across a large squad. Set it up for repeated form reps so athletes self-correct while you work with other groups, and reset the break-away brace after contact. Wipe it down after wet sessions and store it in a dry space so it's ready for every technique workout.

The Blazer Galaxy Flight Discus is a performance competition discus engineered for maximum spin and flight. It carries a high percentage of its weight in the rim, which raises the moment of inertia for a more stable, longer-carrying throw — the kind of high-rim-weight design experienced throwers look for when they're chasing distance at the varsity and collegiate level.

Key features & specs:

• High rim-weight design for stable spin and maximum flight
• Competition-grade construction and finish
• Balanced side plates for a consistent grip and clean release
• Built for experienced varsity and collegiate throwers
• Available in standard competition weights — confirm the weight for your event and age/gender class

Coach's tip: high-rim-weight discs reward throwers with solid technique and spin, so save them for developed athletes rather than beginners. Match the weight to your athlete's competition class and store indoors and dry.

The Blazer Gold Discus is a competition-grade discus built for high school and collegiate throwers who are ready to move past a basic practice implement. Like the rest of Blazer's throws line, it carries a rim-weighted design that keeps mass toward the outer edge, raising the moment of inertia so the disc spins truer and holds its line for a longer, more stable flight. It's a reliable meet-day and hard-training discus for developing throwers building distance.

• Rim-weighted design for stable spin and consistent, carrying flight
• Competition-grade construction and finish for meet and heavy-training use
• Balanced side plates for a clean, repeatable grip and release
• Built for developing varsity and collegiate throwers with sound technique
• Available in standard competition weights — confirm the exact weight, rim-weight tier, and construction for your event and age/gender class before ordering

Coach's tip: match the discus weight to your athlete's competition class (girls', boys', women's, or open) and reserve higher-rim-weight discs for throwers with developed spin. Wipe the disc down after each session and store it indoors and dry to protect the rim and side plates.